• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.151-158
• /
• 2002

In this paper, Phase locked microwave oscillator having the low phase noise and high stability for digital MMDS down converter was designed. we have been analyzed the low phase noise properties by the active device nonlinear equivalent circuits and derived the necessary and sufficient conditions for high stable voltage control oscillator. And it is applied to phase locked loop, we design the phase locked microwave oscillator of frequency synthesizer. Experimental results of designed phase locked oscillator shows -85dBc/Hz @ 10KHz phase noise properties and simulation result is -90Bc/Hz @ 10kHz respectively we shows that proposed low phase noise and stable conditions of phase locked microwave oscillator can be applied to design the high stable digital MMDS frequency synthesizer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.1
• /
• pp.94-107
• /
• 2024

This study developed compression pants with excellent wearability and signal quality by approaching the design of wireless sEMG monitoring pants from the perspective of technical design, including the evaluation of wearability and the stable wireless transmission of signals through electrode and circuit design, and using e-textiles. An electrode, sewn with silver thread and a circuit stitched in a zigzag pattern using stainless steel wire, were applied. Additionally, polyurethane sealing tape was used to enhance adherence to the skin and reduce electrical resistance. Conductive snaps completed the design, allowing attachment and detachment to the bio-signal acquisition mainboard. Through the subjects' evaluation, it was determined that the final pants were applied with a pattern reduction rate of 25% to provide superior comfort according to different body parts while also minimizing skin irritation around the thigh circuit. The final pants for wireless sEMG monitoring, which demonstrated stable transmission of wireless measurements, was positively evaluated in terms of cognitive acceptability. This study is significant in that it achieved an optimal design by considering both technical aspects and the electrical characteristics of bio-signal monitoring garments, as well as the wearer's perception when designing smart wear.

• Ecology and Resilient Infrastructure
• /
• v.4 no.3
• /
• pp.169-179
• /
• 2017

This study analyzed the aspect of bed change according to the stable channel design on the Wonju River to quantitatively evaluate habitat suitability (HS). According to the result of evaluating stable channel of object section in the Wonju River, 17 sections among total 20 sections were stable and 3 sections were unstable. Physical disturbance improvement evaluation (PDIE) was the range average showed good disturbance condition with a range average of 112.17 points. Habitat suitability index of Zacco Koreanus, the most dominant species of the Wonju River, was used for analysis of physical habitat for fish. According to the physical habitat analysis result, HS was 0.16 and weighted usable area (WUA) was $347.68m^2$. The methods of improving/introducing/removing structures and dredging stream channel were used for stable channel design of unstable channel, and analyzed PDIE according to the aspect of bed change and changes in habitat suitability. Stable channel design was possible in 19 sections in times of structures improvement/introduction/removal, and PDIE was 117.53 points, HS was 0.14 points, and WUA was $313.37m^2$. Stable channel design was possible in all 20 sections when dredging the stream channel. PDIE was 116.50 points, HS was 0.16, and WUA was $332.14m^2$. Therefore, this study obtained channel design measures that can improve physical soundness and stability of the Wonju River, and it was analyzed that it will have no impact on changes of physical disturbance and physical habitat. Furthermore, this study analyzed velocity and depth of each section and appearance frequency of riffle and pool to analyze correlation between physical disturbance and physical habitat. According to the analysis result, it was identified that the analysis of riffle and pool showed similar result as the evaluation result of physical habitat.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.314-327
• /
• 2015

20th century, beginning of modern, the style of art and design, separated reasonable and sensitive code. Art form including cubism, constructivism, futurism and different form including fauvism, expressionism, surrealism and abstract expressionism coexist two code in early modern. But the style of design was separated each period with geometric and organic form, reasonable and sensitive code. Replacement timing on two design style was the transition period of the production-oriented step to the sale-oriented step in marketing. In early stage modern it was stable production-oriented step. Geometric style include G. Rietvevld (Red and Blue chair), M. Breuer (Wassily chair), Fanizon and Martinelli (I-Ching) was simple and functional, received the absolute support. An aggressive demand generation and sales promotion for the design change was needed so that excess supply in the market with a stable production. In sale-oriented step for sales promotion in mid modernism, it was accepted transitions to the sensual organic volume with elegant and sleek style include C. Eames (LCW chair), V. Panton (Panton chair) and C. Mollino (Arabesco Tea table).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.67-75
• /
• 2002

A study to investigate the influence of combustion chamber shape, especially piston top face configuration, on the combustion stability is presented with CFD analysis and single cylinder GDI engine test. Initial configuration of the piston bowl was designed with CFD analysis and further parametric studies of the design factors on the piston top face were carried out through the single cylinder GDI engine test. It was found that both the geometry of piston top face and the compression ratio have great influences on the combustion stability. Of interest is that the design factors of the GDI piston to prevent mixture diffusion out of the piston bowl have important roles for the stable combustion at the stratified mixture condition. Also the relationship between spray impingement and flow pattern in a GDI piston bowl should be considered to design an optimal bowl configuration for stable stratified combustion.

• Journal of Korea Multimedia Society
• /
• v.22 no.11
• /
• pp.1259-1268
• /
• 2019

Recently, Communication media have been developed for the underwater communication in underwater environments where the underwater communication failures occur frequently. Although the underwater communication by one medium is not stable due to the influence of the underwater environment, the use of various communication media can complement each other and so this makes the underwater communication more stable. For this reason, this paper proposes approaches to the design and implementation of integrated MAC for complementing individual unstable underwater communications. In addition this paper presents the comparison and analysis on each of the proposed approaches so to be able to provide guidelines to designers and implementers of integrated MAC.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.2
• /
• pp.144-155
• /
• 1992

A design of a highly stable current-controlled power supply combining the phase-controlled rectifier (PCR), passive filter and active filter is investigated. A digital phase-looked voltage control (PLVC) with a capability of compensating the thyristor firing angles under unvalanced power source is proposed` otherwise the PCR output voltage has low-order subharmonics whose suppression requires a bulky passive filter. The digital PLVC has a fast dynamic characteristics as an inner control loop of the PCR. To suppress further the output ripple, an active filter using a transformer is introduced and its design is described through the frequency domain analysis. An optimal integral, proportional and measurable variable feedback (IPM) controller is designed using the time-weighted performance index based on the time domain analysis. The design method based on the time-weighted performance index gives better response characteristics than that based on the conventional performance index. It is also shown via experimental results that the proposed scheme gives better response characteristics than that based on the conventional performance index. It is also shown via experimental results that the proposed scheme gives good dynamic and static performances.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1142-1146
• /
• 2014

This paper addresses on a $H_{\infty}$ sampled-data stabilization of a Takagi-Sugeno (T-S) fuzzy system. The sampled-data stabilization problem is formulated as a discrete-time stabilization one via a direct discrete-time design approach. It is shown that the sampled-data fuzzy control system is asymptotically stable whenever its exactly discretized model is asymptotically stable. Based on an exact discrete-time model, sufficient design conditions are derived in the format of linear matrix inequalities (LMIs). An example is provided to illustrate the effectiveness of the proposed methodology.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.24-31
• /
• 1997

A new design method of stable RF power amplifier using 3dB coupled line is proposed in this thiesis. The proposed method of broadband matching consist of resistive matching circuits at low frequency and lossless matching circuits at microwave band. This design method increase the stability of an amplifier and is suitable for interstage matching. When high power amplifier is designed using this method for PCS base transceiver station, the measured resutls show thst the gain of 18.5dB, and 9W (39.5dBm) output power. We use motorola's MRF6401 for medium power and MRF 6402 for large power and cascaded them.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.465-472
• /
• 1999

Hydraulic model tests are performed to find economical and hdrqulically stable design of cooling water intake channel of steam power plant. The result of tests show that the standard distributiion of y-components in the chamber of CWP(circulating Water Pump) are recommended below 3.5 to maintain hydraulic stability, so that this value is considered as the design criteria. Common basin is necessary to improve the hydraulic stability of inflow, however the longer basin does not always improve the hydraulic stability , and the optimal length of basin can be found in some range. From the results the flow stability maintained the best condition when the length of basin is 7.2m. Beside the standard tests the auxiliary tests like edge , baffle, trapezoidal section and increase of pump capacity are carried out based on the optimal condition foudn in the standard tests. From the series of tests the economical and hydraulically stable design of intake channel was proposed.