• Journal of the Korean Geotechnical Society
• /
• v.27 no.9
• /
• pp.47-53
• /
• 2011

Marine dredged soils taken from navigation channels or construction sites of coastal area usually have a lot of salt in pores of clayey soils. This paper investigates effect of salt on mechanical characteristics of non-salt and salt-rich stabilized dredged soil. The stabilized dredged soil (SDS) consisted of dredged soil and cement. Several pairs of SDS with non-salt and salt-rich dredged soils, noted as N-SDS and S-SDS, respectively, were prepared to compare their strengths and compressibility characteristics. The microstructures, strength and compressibility characteristics of N-SDS and S-SDS specimens at 7 and 28 days of curing time were evaluated using scanning electronic microscope (SEM), unconfined compression test, and oedometer test. It was found that salt concentration of clayey soil affected not only the formation of soil structure but also the strength development of mixture. The compression index and swelling index of S-SDS were also greater than those of N-SDS, which indicated that the compressibility of mixture increased due to salt concentration. Salinity in clayey soil had a negative effect on the strength development and compressibility characteristics of stabilized dredged soils.

• International Journal of Highway Engineering
• /
• v.20 no.4
• /
• pp.21-26
• /
• 2018

PURPOSES : The objective of this study is to evaluate the application of soil stabilization method for soft shoulder construction in the iRoad Project of Sri Lanka. METHODS : Firstly, the quantitative analysis of soil strength improvement due to soil stabilization was done for soil samples collected from iRoad construction sites. Two types of soils were selected from iRoad Project sites and prepared for soil stabilization testing by the Road Development Authority. Secondly, the appropriate stabilizer was selected at given soil type based on test results. Two different stabilizers, ST-1 and ST-2, produced in Korea were used for estimating soil strength improvements. Finally, the optimum stabilizer content was determined for improving shoulder performance. The uniaxial compressive strength (UCS) test was conducted to evaluate the strength of stabilized soil samples in accordance with ASTM D 1633. The use of bottom ash as a stabilizer produced from power plant in Sri Lanka was also reviewed in this task. RESULTS : It is found from the UCS testing that a 3% use of soil stabilizer can improve the strength up to 2~5 times in stabilized soft shoulder soils with respect to unstabilized soils. It is also observed from UCS testing that the ST-1 shows high strength improvement in 3% of stabilizer content but the strength improvement rate with increase of stabilizer content is relatively low compared with ST-2. The ST-2 shows a low UCS value at 3% of content but the UCS values increase significantly with increase of stabilizer content. When using the ST-2 as stabilizing agent, the 5% is recommended as minimum content based on UCS testing results. Based on the testing results for bottom ash replacement, the stabilized sample with bottom ash shows the low strength value. CONCLUSIONS : This paper is intended to check the feasibility for use the soil stabilization technique for shoulder construction in Sri Lanka. The use of soil stabilizer enables to improve the durability and strength in soft shoulder materials. When applying the bottom ash as a soil stabilizer, various testings should be conducted to satisfy the specification criteria.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.3
• /
• pp.53-59
• /
• 2001

There is a lot of method to manage the insanitary landfill but vertical cutoff walls have been widespreadly used and were installed into the subsurface to act as a barrier to horizontal groundwater flow, The stabilized material such as specialized cement or mixed soil with additives has been generally applied for the materials of the deep soil mixing barrier in korea. The amount of the stabilized material is dependent on the field conditions, because the mixing ratio of the material and the field soil should achieve a requirement in the coefficient of permeability, lower than 1.0$\times$$10^{7}$cm/sec. This study determined the quantity and optimized function ratio of the stabilized material in the formation process of the mixed barrier that was added with stabilized material on the field soil classified into SW-SC under USCS (Unified Soil Classification System). After that the fly ash and lime were selected as an additives an that could improve the function of the stabilized material and then the method to improve the functional progress in the usage of putting into the stabilized material as an appropriate ratio was studied and reviewed. The author used the flexible-wall permeameter for measuring the permeability and unconfined compressive strength tester for compressive strength, and in the view of environmental engineering the absorption test of heavy metals and leaching test regulated by Korean Waste Management Act were performed. As the results, the suitable mixing ratio of the stabilized material in the deep soil mixing barrier was determined as 13 percent. To make workability easy, the ratio of stabilized material and water was proven to be 1 : 1.5. With the results, the range of the portion of the additives(fly ash : lime= 70 : 30) was proven to be 20-40% for improving the function of the stabilized material, lowering of permeability. In heavy metal absorption assessment of the mixing barrier system with the additives, the result of heavy metal absorption was proved to be almost same with the case of the original stabilized material; high removal efficiency of heavy metals. In addition, the leaching concentration of heavy metals from the leaching test for the environmental hazard assessment showed lower than the regulated criteria.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.63-72
• /
• 2013

This study estimated stabilization efficiency of As and heavy metal contaminated agricultural soil in abandoned mine through pot experiment. Also contaminants uptake of plant (lettuce) was compared as function of amendment (limestone, steelmaking slag and the mixture of these) addition. In soil solution analysis, concentration of contaminants in soil solutions which added limestone or steelmaking slag were lower than that of the mixture. Especially in As analysis, concentration with 5% (wt) addition of steelmaking slag showed the lowest value among those with other amendments. This seems that As stabilization happens through Fe adsorption during precipitation of Fe by pH increasing. Leachability of As in stabilized soil by TCLP was represented similar result with soil solution analysis. However leachability of heavy metals in stabilized soil was similar with that of non-stabilized soil due to dissolution of alkali precipitant by weak acid. Contaminants uptake rate by plant was also lower when limestone or steelmaking slag was used. However this study revealed that concentration of contaminants in soil solution didn't affect to the uptake rate of plant directly. Because lower $R^2$ (coefficient of determination) was represented in linear regression analysis between soil solution and plant.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.457-462
• /
• 2022

This study is about the case applied of a shallow foundation reinforcement method for a low/mid-rise building where a relatively small load is applied by using a soil stabilized material that utilizes recycled resources. First, laboratory mixing test was conducted for four mixing ratios in order to derive the optimal mixing ratio in the field. Using the derived optimal mixing ratio, it was applied as a shallow foundation for the building in the field. The field application method used a simple process of compaction by the soil mixedure with the original soil and the soil stabilized material in the field. After field application, a plate bearing test was performed on one original ground and two improved ground to confirm the allowable bearing capacity. As a result of checking the bearing capacity, it was found that sufficient bearing capacity was exhibited.Therefore, it was confirmed that it can be used as a shallow foundation for the building.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.2
• /
• pp.80-85
• /
• 2003

This study was conducted to find out the effect of a lime stabilized slaughterhouse waste(LSW) on the growth of chinese cabbage and soil pH. Two levels of the lime stabilized slaughterhouse waste treatment, 169 and $338kg\;10a^{-1}$, with N-P-K fertilization were tested, and treatments of N-P-K and N-P-K with slaked lime were included in the experiment as a control. Fresh weight of chinese cabbage at harvest was not significantly different among the treatments. However, in the LSW treatment of $169kg\;10a^{-1}$, fresh weight of chinese cabbage was 5% higher comparing to the N-P-K treatment. Contents of N, P, and K in chinese cabbage were higher in the LSW treatments in comparison to the control treatments. Competitive inhibition of Mg uptake by Ca in the treatments of LSW and lime was apparent. Soil pH was increased by the application of LSW, and the increase in the LSW treatment of $169kg\;10a^{-1}$ was nearly the same as the soil pH increase in the slaked lime treatment. The lime stabilized slaughterhouse waste can be considered as a potential soil amendment for amelioration of soil acidity and supply of organic matter as well.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.189-197
• /
• 2003

The treatment and hauling of surplus soils which occur from construction activity are costly and have been demanding a reasonable recycling method. This study presents laboratory test results regarding the mechanistic properties of asphalt stabilized soils. The foamed asphalt equipment which generates the asphalt bubble was used to mix the soil. The marshall stability, indirect tensile test, resilient modulus, creep test and triaxial test(UU) were conducted to find out the performance of the asphalt stabilized soil. The test results were compared with the samples that fabricated in different conditions(the samples without asphalt and the reinforced samples using 2% cement). The inclusion of the asphalt in the soil has improved the marshall stability, resilient modulus and moisture susceptibility, and the addition of the 2% cement has even more increased these properties. The amount of the fines and the optimum moisture contents for mixing affects the mechanistic properties and important parameters for mix design.

• Geomechanics and Engineering
• /
• v.22 no.2
• /
• pp.143-152
• /
• 2020

In this research, soil samples of the Kerman sedimentary basin, Iran, were investigated through laboratory tests such as petrography (Scanning Electron Microscopy (SEM), X-Ray Fluorescence Spectroscopy (XRF) and X-Ray Diffraction (XRD)), physical and mechanical characteristics tests. The soil in this area is dominantly CL. The petrography results showed that the dominant clay mineral is Illite. This soil has made some problems in the earth dams due to the low shear strength. In this study, a set of samples were prepared by adding different amounts of lime. Next, the petrography and strength tests at the optimum moisture content were performed. The results of SEM analysis showed substantial changes in the soil structure after the addition of lime. The primary structure was porous and granular that was changed to a uniform and solid after the lime was added. According to XRD results, dominant mineral in none stabilized soil and stabilized soil are Illite and calcite, respectively. The pozzolanic reaction resulted in the reduction of clay minerals in the stabilized samples and calcite was known as the soil hardener material that led to an increase in soil strength. An increase in the hydrated lime leads to a decrease in their maximum dry unit weight and an increase in their optimum moisture content. Furthermore, increasing the hydrated lime content enhanced the Unconfined Compressive Strength (UCS) and soil's optimum moisture. An increase in the strength is significantly affected by the curing time and hydrated lime contents, as the maximum compressive strength is achieved at 7% hydrated lime. Moreover, the maximum increase in the California Bearing Ratio (CBR) achieved in clay soils mixed with 8% hydrated lime.

• Journal of Soil and Groundwater Environment
• /
• v.29 no.1
• /
• pp.10-17
• /
• 2024

In Korea, the common remedial process for reclamation of agricultural soils nearby abandoned mines involves chemical soil stabilization followed by covering with clean soil. This study investigated the chemical properties of cover soils and the validity of HCl extraction method in assessing the degree of As and heavy metal stabilization in stabilized soils collected from 14 plots where mine reclamation had been completed. The results revealed there were no major differences in contaminants extraction rate between the stabilized soils and contaminated soils, suggesting HCl extraction procedure is a less feasible method to determine the efficiency of the stabilization. Soil quality indicators including OM, SiO₂, P₂O₅, etc. of the land-covering soils were generally lower than those of stabilized soils that used to be the cultivation layer before the stabilization. Nonetheless, the value of those indicators didn't meet the regulatry limits of agricultural soil. Therefore, future strategy for mine reclamation should concentrate not only on contaminant concentration but also on soil quality parameters for agricultural use of the reclaimed soil.

• YAKHAK HOEJI
• /
• v.31 no.4
• /
• pp.236-251
• /
• 1987

The chemistry, antimicrobial properties, organic soil resistance, toxicity, corrosivity and chemical stability of stabilized alkaline 2%, glutaraldehyde solution(SGS) are discussed. SGS retains the maximum antimicrobial activity of alkaline glutaraldehyde solutions and the chemical stability here to fore observed only with acidic glutaraldehyde solutions. These improvements, along with the inherent resistance of glutaradehyde to neutralization by organic soil, allow SGS to be continuously used for 14 days in situations of high dilution, or 28 days in situations of low dilution.