• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.125-139
• /
• 1996

The author obtained some useful information for the class III treatment from long term observation on the growing patients with class III malocclusion. 8 patients were selected for this study and presentation. From these observation so far my conclusions might be as follows: First in the early correction of the anterior crossbite, considerable forward growth changes were observed in the maxilla Second, as for the growth modification of jaws by orthopedic treatment only limited effects were recognized from the long-term observation Thrid, at early age of patients with anterior crossbite, any data couldn't make me predict the stability after treatment on the long-term basis. Fortunately, however, genial angle showed a marginal possibility of it prediction. Fourth, at an advanced age/ retraction orthopedic force on the mandible and the rapid change in the mandibular position may cause some trouble in the T.M.joint. Finally, the followings are recommendable. As for the anterior crossbite, correct it early as possible, and use orthopedic force under the age of ten. Do not enter the phase II treatment directly. Just wait and observe until the growth were almost completed, focusiong on some important factors such as airway problem, tongue position, and third molar development. Of course, these factors may have some effects on the mandibular growth. for the female, at the age of around 14 years old and the male, around 17 years old, make a final decision whether the patients will continue to be treated orthodontically or surgically Thereby, (I think) the relapse and retreatment problem after treatemnt we have observed so far might be minimized. Furthermore, the active treatment time may be also reduced.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.471-479
• /
• 2019

The purpose of this study was to investigate the correlations between ADHD, depression, anxiety, suicide risk and suicide risk of university freshmen, and to investigate factors affecting suicide risk of university freshmen. As a result, the correlation between suicide risk and ADHD, depression, and anxiety were statistically significant. The correlation between suicide risk and ADHD (r=-.411) was moderately negative, while depression (r=-.594) and anxiety (r=-.563) were high negative correlations. According to the logistic regression analysis, the significant factors affecting suicide risk of college freshmen were ADHD, depression, and anxiety. In the abnormal group of variables, ADHD (OR=3.17; 95% CI 1.36-7.38), depression (OR=10.80; 95% CI 4.32-27.02) and anxiety (OR=3.39; 95% CI 1.55-7.41) were identified as influencing factors. As such, suicide risk groups of college freshmen are highly associated with ADHD, depression, and anxiety. Therefore, personal counseling and regular psychological tests of college freshmen will be provided to the high-risk suicide program to help students' psychological stability and adjustment to school life.

• Journal of Internet Computing and Services
• /
• v.20 no.5
• /
• pp.87-94
• /
• 2019

In this paper, the method of analyzing the unformatted data of consumers accumulated on social networks in the era of the Fourth Industrial Revolution by utilizing data from the service design and social psychology aspects was proposed. First, the fandom phenomenon, which shows subjective and collective behavior in a space on a social network rather than physical space, was defined from a data service perspective. The fandom model has been transformed into a collective level of customer Persona that has been analyzed at a personal level in traditional service design, and social network analysis that analyzes consumers' big data has been presented as an efficient way to pattern and visually analyze it. Consumer data collected through social leasing were pre-processed by column based on correlation, stability, missing, and ID-ness. Based on the above data, the company's brand strategy was divided into active and passive interventions and the effect of this strategic attitude on the growth direction of the consumer's fandom community was analyzed. To this end, the fandom model of consumers was proposed by dividing it into four strategies that the brand strategy had: stand-alone, decentralized, integrated and centralized, and the fandom shape of consumers was proposed as a growth model analysis technique that analyzes changes over time.

• Journal of Service Research and Studies
• /
• v.12 no.2
• /
• pp.106-116
• /
• 2022

As part of the Fire Evacuation Service scenario using mobile applications, this study aims to find the appropriate colors to be used in the interface of the application and to define and apply colors that can positively and reliably affect human unstable psychology in the course of evacuating the room in case of fire. In the situation of fire, proper design and placement of the colored escape guidance interface is important, taking into account the psychology of the occupants. However, literature and previous research have shown that colors used to induce evacuation are not suitable for effective evacuation in case of fire. In this study, the purpose of the study was to provide a color that would provide psychological stability in the event of a evacuation in consideration of the psychological issues of those who are still in need of shelter, and to use it to help induce an efficient evacuation in the event of a disaster. Using the image evaluation method, the form and color of images have been derived through frequency analysis to a number of unspecified people, and the main and secondary colors of images were analyzed through KSCA color analysis. Finally, the final application color was constructed through mutual verification between the results by comparing and analyzing the colors obtained through the image evaluation analysis results and the KSCA color analysis results. The results of the study showed that the green line can help stabilize the human mind through comparative analysis with prior research. Therefore, the main color for guiding calm and calm applications in case of fire escape is proposed in the green line. In this study, the experiment with image evaluation cannot accurately measure the effect of factors on color among complex factors. A subsequent study of this will help quantify images if it allows the subject matter of color and image to be defined to some extent through factor analysis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.9
• /
• pp.1325-1332
• /
• 2015

Lettuce (Lactuca sativa) is an important dietary leafy vegetable that is primarily consumed as a fresh or salad material. It has a number of cultural varieties with green and/or red color. Carotenoids and anthocyanins are known to be responsible for these two colors, respectively. In this study, carotenoid and anthocyanin contents were determined to evaluate the stability of these functional pigments during storage at home. Analyses were carried out at the beginning, 3, 6, 9, and 12 days after harvest. In the course of storage at room temperature, total carotenoid levels rapidly decreased, and the decrease was found to be greatest during the first 3 days. Meanwhile, carotenoid level slightly changed within the first 9 days at $4^{\circ}C$ after harvest. This result suggests that carotenoids in green lettuce are more stable when refrigerated than at room temperature. Meanwhile, total anthocyanin content in red lettuce did not significantly decrease during storage at room temperature and $4^{\circ}C$, which indicates that anthocyanins have higher stability during storage compared with carotenoids in green lettuce. Anthocyanin extract exhibited higher antioxidant activity than carotenoid extract based on 2,2'-azino-bis(3-ethylbenzothazoline-6-sulfonic acid) (ABTS) radical scavenging assay. Antioxidant activity of anthocyanin extract may also be estimated directly by the presence of another potent hydrophilic antioxidant compound, which is ascorbic acid in this extract. In addition, anthocyanin extract showed about a 5-fold higher amount of anthocyanins than carotenoids in the carotenoid extract. The high correlation between carotenoid content with ABTS radical scavenging activity indicates that ABTS assay is more suitable than 1,1-diphenyl-2-picrylhydrazyl radical scavenging assay for detecting antioxidant capacity of carotenoid extract from lettuce.

• The Korean Society of Law and Medicine
• /
• v.17 no.2
• /
• pp.177-219
• /
• 2016

A commercial advertisement is not only a way of competition but also a medium of communication. Thus, it is under the constitutional protection of the freedom of business (article 15 of the Constitution) as well as the freedom of press [article 21 (1) of the Constitution]. In terms of the freedom of business or competition, it should be noted that an unfair advertising (false or misleading advertisement) can be regulated as an unfair competition, while any restraint on advertising other than unfair one might be doubted as an unjustifiable restraint of trade. In terms of the freedom of press or communication, it is important that article 21 (2) of the Constitution forbids any kind of (prior) censorship, and the Constitutional Court applies this restriction even to commercial advertising. In this article, the applicability of these schemes to advertising of the so-called learned professions, especially physician, are to be examined, and some proposals for the reformation of the current regulatory regime are to be made. Main arguments of this article can be summarized as follows: First, the current regime which requires advance review of physician advertising as prescribed in article 56 (2) no. 9 of Medical Act should be reformed. It does not mean that the current interpretation of article 21 of the Constitution is agreeable. Though a commercial advertising is a way of communication and can be protected by article 21 (1) of the Constitution, it should not be under the prohibition of censorship prescribed by article 21 (2) of the Constitution. The Constitutional Court adopts the opposite view, however. It is doubtful that physician advertising needs some prior restraint, also. Of course, there exists severe informational asymmetry between physicians and patients and medical treatment might harm the life and health of patients irrevocably, so that medical treatment can be discerned from other services. It is civil and criminal liability for medical malpractice and duty to inform and not regulation on physician advertising, to address these differences or problems. Advance review should be abandoned and repelled, or substituted by more unproblematic way of regulation such as an accreditation of reviewed advertising or a self-regulation preformed by physician association independently from the Ministry of Health and Welfare or any other governmental agencies. Second, the substantive criteria for unfair physician advertising also should correspond that of unfair advertising in general. Some might argue that a learned profession, especially medical practice, is totally different from other businesses. It is performed under the professional ethics and should not persue commercial interest; medical practice in Korea is governed by the National Health Insurance system, the stability of which might be endangered when commercial competition in medical practice be allowed. Medical Act as well as the condition of medical practice market do not exclude competition between physicians. The fact is quite the opposite. Physicians are competing even though under the professional ethics and obligations and all the restrictions provided by the National Health Insurance system. In this situation, regulation on physician advertising might constitute unjustifiable restraint of competition, especially a kind of entry barrier for 'new physicians.'

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.763-769
• /
• 2009

Background: In the majority of cases, sternal instability and wound infection concomitantly present after a cardiac operation following conventional median sternotomy, and these complications have a major influence on the postoperative course. The aim of this study is to compare the results of the different sternal wiring techniques of sternal infection. Material and Method: Between April 2004 and December 2008, 157 adult patients underwent cardiac in group A, whereas 71 patients who had undergone modified Robicsek sternal wiring were included in group B. The incidences of sternal wound complications in the two groups were assessed. Result: The mean age of the group B patients was older than that of the group A patients ($61{\pm}10$ years vs $57{\pm}13$ years). The incidence of preoperative left ventricular dysfunction (ejection fraction <30%), chronic obstructive pulmonary disease, renal failure requiring dialysis and diabetes mellitus were significantly higher in Group B, whereas the other perioperative risk factors for infection were not significantly different between the two groups. Two patients in group A experienced superficial wound infection, whereas 4 patients in group B displayed superficial wound infection, but the difference was not statistically significant (p=0.255). Yet poststernotomy deep sternal wound infection appeared in 6 patients of group A, whereas none of the patients in group B displayed this malady. Conclusion: The modified Robicsek sternal wiring technique showed greater sternal stability even for the patient with a high risk for infection, and the technique caused a lower incidence of deep sternal wound infection.