• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.4
• /
• pp.95-102
• /
• 2013

Recently (2010), South Korea's aging rate is 11%. and expected to be 32.3% in 2040, and Japan's aging rate in 2010 is 23%, and in 2040 is expected to be 34.5%. As aging progresses, it is increasing with the elderly person with dementia. However, elderly welfare facilities are insufficient. To take care stability of elderly people with mental and physical disabilities, we need to prepare a lot of welfare facilities for the elderly. Whenever physical conditions and service needs change of the disability elderly, Elderly are forced to move to the other facility. They move from familiar places, beloved local base to unfamiliar places. They are under a lot of stress in order to adapt to new environment. This research is to check out the possibility of the systems and the effectiveness of various services and the flexibility of management in Japan. Takurosyo is responsible for a variety function of elderly medical welfare facilities. Within a short time, our country, has entered into a super-aged society, elderly health and welfare facilities are needed. However, because it requires enormous financial, it is difficult to build a new building in reality, However, if remodeling existing buildings, We can build many low-cost small-scale multi-functional welfare facilities such as the takurosyo. Such that facility would be available to us.

• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.493-511
• /
• 2018

This paper deals with visual confirmation device for tensile force verification in order to cope with tensile force loss of ground anchor. Ground anchors are constructed to ensure the stability of social infrastructure facilities, but continuous loss of tensile force is seriously concerned about safety of the facilities. This requires the maintenance of the anchors, but the current measuring of residual tensile force is done by sampling, taking into account economic aspects, which limits precision. In this paper, conducted a conceptual design, tensile experiment, and field test for the purpose of developing an anchor tensile force visual device to check the tensile force of the anchors.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.10
• /
• pp.940-947
• /
• 2007

For the performance upgrade of a supersonic jet fighter, the processor and FLCC(Flight Control Computer) Architecture were upgraded from a baseline FLCC. Prior to the hardware implementation phase, the exact CPU throughput estimation is necessary. For this purpose, an experimental method for new FLCC throughput estimation was introduced in this study.　While baseline FLCC operating, the CPU address bus was collected with logic analyzer, and then decoded to get the exact access times to each memory-memory and the number of program Instruction branches. Based on these data, a throughput test in CPU demo-board of the new FLCC configuration was performed. From test results, the CPU-Memory architecture was design-changed before FLCC hardware implementation phase. To check the flight stability degradation due to power-interrupt problem due to CPU-Memory architecture change, the piloted HILS (Hardware-In-the Loop Simulator) test was conducted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1359-1369
• /
• 2012

In the case of using pile foundation to support bridge abutments on soft ground, the soft ground often causes serious troubles such as lateral movement of bridge abutments by lateral surcharges. In this paper, we investigated and measured the amount of strain of a bridge abutment in the south-western part of Korea. To check the stability and possibility of lateral movement of the bridge abutment, we used the four analysis methods and compared those results; lateral movement index, index for decision of lateral movement and infinite element analysis method. We performed soil and ground tests to fine the causes of the strain and lateral movement. After reviwing several types of repair methods, we suggested the anker reinforcement method along with surcharge process method as a proper repair and rehabilitation of the bridge abutment. Our investigation by through the infinite element analysis method confirmed the effectiveness of the anker reinforcement method allong with the surcharge process method.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.2
• /
• pp.50-61
• /
• 2002

This paper - following 'Functional requirement of marine waste cleaning ships and organization of the fleets'[1] - describes on the preliminary conceptual design procedure for the multi-purpose marine waste cleaning system for shallow waters. The working area of this system is Yellow Sea and part of South Sea of South Korea. As the first step, we determined the functional requirements including the daily target of waste collecting. Then, the preliminary conceptual design and general arrangements were carried out. In order to evaluate the safety and efficiency of this designed system, the stability check and the computer graphic simulation were carried out. Finally, the sea trial performance test of integrated systems in Yeosoo ports was performed and the designed system was shown its validity and effectiveness.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.574-579
• /
• 2016

Unlike general unmanned aerial vehicles, the quad-rotor is attracting the attention of many people because of simple structure and very useful value. However, as the interest in drones increases, the safety and location of vehicles are becoming more important provide against aviation safety accidents or lost accidents. Therefore, in this paper, we propose a tracking system that stabilizes the model with a simple controller by linearized modeling and grasp tilt angle data from various sensor through the filter. The developed tracking system transmits the position of the quad-rotor in flight to the computer and shows it through the route, so it can check the flight path and various information such as flight speed and altitude at the same time. Then the sensor used in the actual quad-rotor can not measure exact sensor data for disturbance and vibration. So we use sensor fusion of Kalman filter and Complementary filter to overcome this problem and the stability of the quad-rotor hovering is realized by PID control. Through simulation, various information such as the speed, position, and altitude of the quad-rotor were confirmed in real time.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.430-433
• /
• 2010

The gasket materials of for the lithium ion battery requires chemical resistance to electrolyte, electrical insulating, compression set, anti-contamination and low temperature property. To check the special characteristics of fillers which are applied to rubber for gasket, compound of EPDM, NBR and FKM (fluoro elastomer) were made by adjusting weights of carbon black and silica additive. Using these compounds, we had done tests of long-term stability against electrolyte, compression set and low-temperature property with considering operating condition of the lithium ion battery. From this test, we investigated the physical and chemical characteristics of rubber with using of carbon black and silica additive in each.

• The korean journal of orthodontics
• /
• v.42 no.2
• /
• pp.73-79
• /
• 2012

Objective: The purpose of this study was to investigate the effects of a newly developed rapid maxillary expansion screw-the memory screw-over 6 months. Methods: Five subjects, aged between 11.7 and 13.75 years, were enrolled in this study. All subjects underwent placement of a maxillary expansion appliance containing superelastic nickel-titanium open-coil springs in its screw bed. The parents of the patients and/or the patients themselves were instructed to activate the expansion screw by 2 quarter-turns 3 times a day (morning, midday, and evening; 6 quarter-turns a day). The mean expansion period was $7.52{\pm}1.04$ days. Dentoskeletal effects of the procedure, including dentoalveolar inclination, were evaluated. Measurements of all the parameters were repeated after 6 months of retention in order to check for relapse. Results: Sella-Nasion-A point (SNA) and Sella-Nasion/Gonion-Menton angles increased, and Sella-Nasion-B point (SNB) angle decreased in all the subjects during the expansion phase. However, they approximated to the initial values at the end of 6 months. On the other hand, the increments in maxillary apical base (Mxr-Mxl) and intermolar widths was quite stable. As expected, some amount of dentoalveolar tipping was observed. Conclusions: The newly developed memory expansion screw offers advantages of both rapid and slow expansion procedures. It widens the midpalatal suture and expands the maxilla with relatively lighter forces and within a short time. In addition, the resultant increments in the maxillary apical base and intermolar width remained quite stable even aft er 6 months of retention.

• Journal of Forest and Environmental Science
• /
• v.36 no.1
• /
• pp.37-46
• /
• 2020

Vegetation carbon sequestration and regeneration are the two major parameters of forest research. In this study, we analyzed the vegetation carbon stock and regeneration of community-managed pine plantation of Kathmandu, central Nepal. Vegetation data were collected from 40 circular plots of 10 m radius (for the tree) and 1m radius (for seedling) applying a stratified random sampling and nested quadrat method. The carbon stock was estimated by Chave allometric model and estimated carbon stock was converted into CO₂ equivalents. Density-diameter (d-d) curve was also prepared to check the regeneration status and stability of the plantation. A d-d curve indicates the good regeneration status of the forest with a stable population in each size class. Diversity of trees was very low, only two tree species Pinus roxburghii and Eucalyptus citriodora occurred in the sample plots. Pine was the dominant tree in terms of density, basal area, biomass, carbon stock and CO₂ stock than the eucalyptus. The basal area, carbon stock and CO₂ stock of forest was 33±1.0 ㎡ ha^-1, 108±5.0 Mg ha^-1 and 394±18 Mg ha^-1, respectively. Seedling and tree density of the plantation was 4,965 ha^-1 and 339 ha^-1 respectively. The forest carbon stock showed a positive relationship with biomass, tree diameter, height and basal area but no relationship with tree density. Canopy cover and tree diameter have a negative effect on seedling density and regeneration. In conclusion, the community forest has a stable population in each size class, sequestering a significant amount of carbon and CO₂ emitted from densely populated Kathmandu metro city as the forest biomass hence have a potentiality to mitigate the global climate change.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.1
• /
• pp.51-55
• /
• 2015

PURPOSE. Bone density at implant placement site is a key factor to obtain the primary stability of the fixture, which, in turn, is a prognostic factor for osseointegration and long-term success of an implant supported rehabilitation. Recently, an implant motor with a bone density measurement probe has been introduced. The aim of the present study was to test the objectiveness of the bone densities registered by the implant motor regardless of the operator performing them. MATERIALS AND METHODS. A total of 3704 bone density measurements, performed by means of the implant motor, were registered by 39 operators at different implant sites during routine activity. Bone density measurements were grouped according to their distribution across the jaws. Specifically, four different areas were distinguished: a pre-antral (between teeth from first right maxillary premolar to first left maxillary premolar) and a sub-antral (more distally) zone in the maxilla, and an interforaminal (between and including teeth from first left mandibular premolar to first right mandibular premolar) and a retroforaminal (more distally) zone in the lower one. A statistical comparison was performed to check the inter-operators variability of the collected data. RESULTS. The device produced consistent and operator-independent bone density values at each tooth position, showing a reliable bone-density measurement. CONCLUSION. The implant motor demonstrated to be a helpful tool to properly plan implant placement and loading irrespective of the operator using it.