• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.71-74
• /
• 2010

Using the technology demonstration model of 75-tonf-class combustor which is expected to be used to the rocket engine of a korean space launch vehicle, 2 times of firing tests were carried out. Firing tests were done at 50% of the nominal flow rate because of incapability of the test facility and limit of the test bed strength. Through the low pressure firing tests of 75-tonf-class channel cooling thrust chamber, reliability and stability at the ignition and combustion phases were confirmed. Additionally it was foreseen that the 75-tonf-class thrust chamber would satisfy the performance requirements.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.1
• /
• pp.37-43
• /
• 2015

A Beta-type Stirling engine is developed and tested on the operation stability and cycle performance. The flow rate for cooling water ranges from 300 to 1500 ml/min, while the temperature of heat source changes from 300 to $500^{\circ}C$. The internal pressure, working temperatures, and operation speed are measured and the engine performance is estimated from them. In the experiment, the rise in the temperature of heat source reduces internal pressure but increases operation speed, and overall, enhances the power output. The faster coolant flow rate contributes to the high temperature limit for stable operation, the cycle efficiency due to the alleviated thermal expansion of power piston, and the heat input to the engine, respectively. The experimental Stirling engine showed the maximum power output of 12.1 W and the cycle efficiency of 3.0 % when the cooling flow is 900 ml/min and the heat source temperature is $500^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.427-432
• /
• 2018

High-capacity secondary batteries can cause explosion hazards owing to microcurrent variations or current surges that occur in short circuits. Consequently, complete safety cannot be achieved with general protection that is limited to a mere current fuse. Hence, in the case of secondary batteries, it is necessary for the protector to limit the inrush current in a short circuit, and to detect the current during microcurrent variations. To serve this purpose, a fuse can be employed for the secondary battery protection circuit with current detection. This study aims at designing a protection device that can stably operate in the hazardous circumstances associated with high-capacity secondary batteries. To achieve the said objective, a detecting fuse was designed from an alloy of low melting point elements for securing stability in abnormal current states. Experimental results show that the operating I-T and V-T characteristic constraints can be satisfied by employing the proposed current detecting self-contained low melting point fuse, and through the resistance of the heating resistor. These results thus verify that the proposed protection device can prevent the hazards of short circuit current surges and microcurrent variations of secondary batteries.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.4
• /
• pp.19-30
• /
• 2002

The stability of slope using root-pile like to the reinforcements is affected by the interaction behavior mechanism of soil-reinforcements. Through the studying on the interaction in joint of its, therefore, the control roles can be find out in installed slope. In study, the stress level ratio based on the insert angle of installed reinforcements in soil used to numerical analysis, which was results from the duty direct shear test in Lab. The maximum shear strain variation on the reinforcements was observed at insert angle, which was approximately similar to the calculated angle based on the equation proposed by the Jewell. The elasto-plastic joint model on the contact area of soil-reinforcements was presumed, the reinforced soil assumed non-linear elastic model and the reinforcements supposed elastic model, respectively. The finite element analysis of assumed models was performed. The shear strain variation of non-reinforced state obtained by the FEM analysis including elasto-plastic joint elements were shown the rationality of general limit equilibrium analysis for the slope failure mode on driving zone and resistance zone, which based on the stress level step according to failure ratio. Through the variation of shear strain for the variation of inserting angle of reinforcements, the different mechanism on the bending and the shear resistance of reinforcements was shown fair possibility.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.6
• /
• pp.376-385
• /
• 2001

Considerable attention has been focused in recent years upon the field of biosorption for the removal of metal ions from aqeous effluents. Compared to other technologies, the advan-tages of biosortption are the high purity of the treated waste water and the cheap raw material. Really, the first major challenge for the biosorption field is to select the most promising types of biomass. Abundant biomass types either generated as a waste by-product of large-scale industrial fermentations particularly fungi or certain metal-binding seaweeds have gained importance in re-cent years due to their natural occurrence, low cost and, of course good performance in metal biosorption. Industrial solutions commonly contain multimetal systems or several organic and in organic substances that form complexes with metals at relatively high stability forming a very complex environment. When several components are present, interference and competition phe-nomena for sorption sites occur and lead to a more complex mathematical formulation of the process. The most optimal configuration for continuous flow-biosorption seems to the packed-bed column which gets gradually from the feed to the solution exit end. Owing to the com-petitive ion exchange taking place in the column, one or more of the metals present even at trace levels may overshot the acceptable limit in the column effluent before the breakthrough point of the trargeted metal. Occurrence of 'overshoot's and impact on havey metal removal has not been analyzed enough. New trends in biosorption are discussed in this review.

• Journal of International Academy of Physical Therapy Research
• /
• v.9 no.2
• /
• pp.1468-1474
• /
• 2018

The purpose of the study was to investigate the immediate effects of negative pressure soft tissue therapy on muscle tone, muscle stiffness and balance in patients with stroke. In total, 20 patients with stroke and assigned to the negative pressure soft tissue therapy group (NPST, n=10) or, placebo-negative pressure soft tissue therapy group(Placebo-NPST, n=10). Both groups underwent NPST or placebo-NPST once a day during the experimental period. MyotonPRO was used to assess the parameters for muscle tone and stiffness. Biorescue was used to assess the parameters for balance. Each group showed improvements in muscle tone, muscle stiffness, and balance ability (p<.05). Especially, Muscle tone, muscle stiffness, and anterior length in the limit of stability were the significant improvement on NPST group (p<.05). The results of the study suggest that the NPST is effective in improving muscle tone, muscle stiffness, and balance ability in patients with stroke.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.5
• /
• pp.574-578
• /
• 1993

Laser-induced photoacoustic spectroscopy (LIPAS), which utilizes the photothermal effect that results from nonradiative relaxation of excited state molecules, was used in the speciation analysis of the complexes of neodymium(III) and water soluble synthetic polyelectrolyte, poly methacrylic acid (PMAA), in 0.1 M $NaClO_4$ at pH of 6.0. The minimum detection limit of Nd(III) by LIPAS was $5.O{\times}10^{-6}$ M. Experiment was carried out at low concentration ratio of Nd(III) to PMAA to assure that 1 : 1 complexes predominate. The bound and free Nd(III) species were characterized by measuring nonradiative relaxation energy of the excited states $(^2GM{7/2}\;and\;^4G_{5/2})$ to the metastable state $(^4G_{3/2})$. Two species were quantified by deconvolution of the mixed spectrum using their respective reference spectra. The conditional stability constant measured by LIPAS was 5.52 L$mol^{-1}$.

• Journal of International Academy of Physical Therapy Research
• /
• v.10 no.2
• /
• pp.1779-1784
• /
• 2019

Background: A number of researchers have attempted to improve the balance of stroke patients, however there is still a question as to whether taping is effective in increasing balance. Objective: To determine the effect of paretic and non-paretic side taping on the balance ability in patients with stroke. Design: A single-blind randomized controlled trial Methods: This randomized single-blind controlled clinical trial with a repeated measures study included 45 subjects who were randomly assigned to paretic side taping groups (n=15), non-paretic side taping groups (n=15), and trunk exercise groups (n=15). Trunk exercise and paretic side taping groups had taping on the paralyzed erector spinae, while the non-paretic side taping group had taping on the non-paralyzed erector spinae. Trunk exercises were performed for 30 minutes to promote core muscles. The balance ability measured the center of pressure movement (paretic side, non-paretic side,forward, backward, limit of stability) in the sitting position. All measurements were evaluated using BioRescue. Results: All three groups showed significant increase in all variables after 4 weeks. The paretic and non-paretic side taping groups had a significant increase in all variables after 30 min of attachment. However, there was no significant difference among the three groups. Conclusions: Paralysis and non-paralysis taping improved the balance ability of patients with stroke in an immediate effect of 30 min. However, after 4 weeks of intervention, taping with trunk exercise did not differ from single trunk exercise. In future studies, various analyses need to be conducted through more diverse evaluations.

• Smart Structures and Systems
• /
• v.7 no.4
• /
• pp.263-274
• /
• 2011

A reliability-based slope stability assessment method considering fluctuations in the monitored matric suction was proposed for real-time identification of slope risk. The assessment model was based on the limit equilibrium model for infinite slope failure. The first-order reliability method (FORM) was adopted to calculate the probability of slope failure, and results of the model were compared with Monte-Carlo Simulation (MCS) results to validate the accuracy and efficiency of the model. The analysis shows that a model based on Advanced First-Order Reliability Method (AFORM) generates results that are in relatively good agreement with those of the MCS, using a relatively small number of function calls. The contribution of random variables to the slope reliability index was also examined using sensitivity analysis. The results of sensitivity analysis indicate that the effective cohesion c' is a significant variable at low values of mean matric suction, whereas matric suction ($u_a-u_w$) is the most influential factor at high mean suction values. Finally, the reliability indices of an unsaturated model soil slope, which was monitored by a wireless matric suction measurement system, were illustrated as 2D images using the suggested probabilistic model.

• PNF and Movement
• /
• v.3 no.1
• /
• pp.27-34
• /
• 2005

Objective : The purpose of this study was conducted to find correct head and neck patterns, manual contact. verbal commands with proprioceptive neuromuscular facilitation(PNF). Method : This is a literature study with books, seminar note and book for PNF international course. Result : Keep the information of the biomechanics and neural science in head and neck patterns and emphasize that manual contact, verbal commands and visual stimulus. Manual contacting for movement guide and stability of the $C_0/C_1$ verbal command and visual stimulus for correcting of the $C_0/C_1$ movements. Conclusion : In reminder for PNF learning, begin with head and neck and upper trunk patterns. In that time, Knott and Voss(1968) had not enough information about biomechanic movement components and neural science movement components. But Knott and Voss(1968) emphasized that head and neck patterns relate with trunk, upper extremities and lower extremities directly. Alar ligaments are relaxed with the head in neutral and taut in flexion. Axial rotation of the head and neck tightens both alar ligaments. The right upper and left lower portions of the alar ligament limit left lateral flexion of the head and neck. Therefore, head and neck patterns has to be modify. When head moving, eye and vestibular stimulus will be change. During head and neck patterns, must be consider about stimulus of eye system and vestibular system also.