• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2001년도 High Temperature Superconductivity Vol.XI
• /
• pp.22-22
• /
• 2001

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.36-40
• /
• 2001

We have studied vortex dynamics in$ Bi_2$$Sr_2$$CaCu_2$O$_{8}$single crystals of unirradiated and irradiated samples by using 100 $\times$ $100\mu\textrm{m}^2$Hall sensor. Doses equivalent magnetic fields are 20 G, 100 G and 1 kG. In the magnetization measurement, a second magnetization peak (SMP) was observed in unirradiated, 20 G dose and 100 G dose samples in contrast to 1 kG dose sample. In the unirradiated sample, the SMP was observed in the range of 18 K ~ 35 K and the amplitude of the SMP decreased with increasing temperature. With increase of the irradiation dose, temperature region and sharpness of the SMP were reduced. In the magnetic relaxation measurement, we observed that the normalized relaxation rate S decreased with increasing the irradiation dose. Our results suggest that the vortex dynamics is not greatly affected by low-density columnar defects.s.

• Progress in Superconductivity
• /
• 제1권2호
• /
• pp.110-114
• /
• 2000

We have investigated the Josephson vortex dynamics in $Bi_2Sr_2CaCu_2O{8+\delta}$ intrinsic Josephson junctions subjected to a magnetic field parallel to $CuO_2$ planes. We investigated mesas with $40\times40{\mu}m^2$ in size and containing 6 and 20. intrinsic junctions. The zero field I-V characteristics exhibited a typical hysteretic, multi-branched nature of the intrinsic Josephson effect. At high magnetic fields (H>1.5 T), I-V characteristics showed flux flow steps. The Swihart velocity obtained from this observation was about $4.2\times10^5$ m/s, which was the lowest mode electromagnetic wave velocity of N coupled stack. The experimental I-V curves fitted well into the simple model of Cherenkov radiation including Ohmic and non-linear dissipation terms. This suggests that the dissipation mechanism of Josephson vortex be due to both Cherenkov radiation and quasiparticle tunneling current.

• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.447-454
• /
• 2003

B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{delta}$의 출발조성비로 99.99%의 순도를 갖는 B $i_2$ $O_3$, PbO, SrC $O_3$, CaC $O_3$, CuO 분말 시약을 사용하여 고상반응법으로 합성하였다. 이렇게 합성된 Bi계 110 K 단일상의 고온초전도 물질을 다시 분말 상태로 만든 후, AgO, A $u_2$ $O_3$, MgO 금속산화물 분말을 각각 50 wt%의 비율로 혼합하였다. AgO, A $u_2$ $O_3$, MgO의 금속분말이 혼합된 시편들을 820~85$0^{\circ}C$로 각각 최종 소결시킨 후, 각 시편들에 대하여 XRD, $T_{c}$, SEM, EDS 등의 실험을 진행하였다. 얻어진 시편들의 $T_{c}$는 순수한 Bi-2223 상보다 낮지만, AgO 금속분말을 50 wt% 혼합한 시편의 임계전이온도가 99.58 K로 A $u_2$ $O_3$나 MgO를 50 wt% 혼합한 시편들보다 더 높게 나타났다. 또한, 표면 입자(grain)의 배열 상태는 AgO 금속분말을 50 wt% 혼합한 시편이 A $u_2$ $O_3$나 MgO를 50 wt% 혼합한 시편들보다 더 치밀화 되는 경향을 나타내었다.내었다.나타내었다.내었다.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.99-103
• /
• 2003

We studied the nonequilibrium superconductivity due to tunnel injection of polaronic quasiparticle (QP) from organic photoconductor. The transport properties of an organic copper (II) phthalocyanine (Cu -Pc)/d-wave superconductor were investigated in dark and under ultraviolet (UV) radiation for performance of a novel $high -T_{c}$ superconducting three terminal device. We observed that the injection of polaronic QP from the organic Cu -Pc film into the $Bi_2$S $r_2$$CaCuO_{8+{\delta}}$ film generated a substantially larger nonequilibrium effect as compared to the normal QP injection current. We could increase the current gain by UV excitation of the organic photoconductor injector. The tunneling spectroscopy of a Cu -Pc/BSCCO junction exhibited a small enhancement of the zero bias conductance peak under the W excitation. The above phenomena are of importance in developing optically controlled three terminal superconducting device.e.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.179-183
• /
• 2000

For a ground plane in high-temperature superconducting ramp-edge junction devices, YBa$_2$Cu$_3$O$_{7-{\delta}}$/SrTiO$_3$/YBa$_2$Cu$_3$O$_{7-{\delta}}$ multilayer structures were fabricated using pulsed laser deposition and ECR ion milling. Various process parameters were adjusted to enhance the device characteristics. By etching the STO layer to form a tapered edge of about 15$^{\circ}$ and in-situ RF plasma treatment of bottom YBCO surface prior to deposition of top YBCO, the top-to-bottom YBCO showed T$_c$ of 75${\sim}$80 K and I$_c$ of about 40 mA through holes. It was found that the deposition of bottom YBCO at a reduced laser repetition rate of 1Hz increased the T$_c$ of top YBCO to 79.9 K. The resistivity of 570 layer was about 10$^6$ ${\Omega}$cm at 60 K, which ensures good electrical isolation between successive YBCO layers.

• International Journal of Advanced Culture Technology
• /
• 제3권2호
• /
• pp.132-137
• /
• 2015

The purpose of this paper was to investigate the effects of solution treatment time and Sr-modification on the microstructure and property of the Al-Si piston alloy. It was found that as-cast microstructures of unmodified and Sr-modified Al-Si alloys consisted of a coarse acicular plate of eutectic Si, $Cu_3NiAl_6$ and $Mg_2Si$ phases in the ${\alpha}$-Al matrix but different in size and morphology. Both size and inter-particle spacing of Si particles were significantly changed by increasing of the solution treatment time. After a short solution treatment, the coarse acicular plate of the eutectic Si appears to be fragmented. Fully modified microstructure of Sr-modified alloy can reduce the solution treatment time to shorter compared to unmodified alloy. The maximum of a peak hardness value is found in the very short solution treatment of both Al-Si piston alloys. Compared to 10 h solution treatment, the solution treatment of 2-4 h is sufficient to achieve appropriate microstructures and hardness. The short solution treatment is very useful to increase the productivity and to reduce the manufacturing cost of the Al-Si piston alloys.

• 한국세라믹학회지
• /
• 제37권12호
• /
• pp.1212-1220
• /
• 2000

Bi-2223 초전도체계에서 석출물을 flux-pinning center로 이용할 수 있는지 가능성을 타진하기 위하여 $Bi_{1.8}$P $b_{0.4}$S $r_{2}$C $a_{2.2}$C $u_3$ $O_{8}$ 조성을 가진 Bi-2223/Ag 선재를 반응온도, 산소분압, 시간 등을 변화시키면서 열처리를 행하였다. 열처리 후 석출물들은 XRD, SEM, TEM, EDS로 분석하였다. Bi-2223 모상내의 (Ca, Sr)$_2$(Pb,Bi) $O_4$, B $i_{0.5}$ P $b_3$S $r_2$C $a_2$Cu $O_{12+}$$\delta$/ (3221)와 같은 2차상들의 크기와 분포는 2223 입자들의 연결성을 파괴하지 않고 열처리 조건에 의해서 조절할 수 있었다. 서냉 열처리가 된 시편은 임계전류밀도( $J_{c}$)값이 증가하였는데, 이는 2223 입자내 나노미터 크기로 형성된 석출물들이 flux-pinning sites로 작용한 것으로 추정된다.다.

• Bulletin of the Korean Chemical Society
• /
• 제23권9호
• /
• pp.1304-1323
• /
• 2002

Superconducting BiSrCaCu(Ni)O ceramicss have been prepared by the gel method using an aqueous solution containing a tartaric acid. The aqueous solution of metal salts was concentrated without precipitation. The precursor so prepared was homogeneou s and calcined at $825^{\circ}C$ for 24 h to produce superconducting phase. The thermal decomposition of gels, the formation of superconducting phase, and their ceramic microstructure were studied using IR, TGA, XRD, resistance measurements, and SEM. This method is highly reproducible and leads to powders with excellent homogeneity and small particle size for easy sinterability. The nickel dopant substituting for Cu gives rise to the gradual decrease of the Tc. Phase pure 2212 ceramics were obtained at 825 $^{\circ}C$ for 24 h. SEM pictures showed that liquid phase was formed when the samples were sintered temperatures higher than 825 $^{\circ}C$.

• 한국세라믹학회지
• /
• 제27권2호
• /
• pp.249-255
• /
• 1990

High Tc Supperconducting thin films were fabricated by rf magnetron sputtering method. We have successfully controlled the compositions of films by adding sintered CuO pellets on YBa2Cu3O7-x single target. High Tc thin films with large grian size and good crystal habit were obtained by rapid thermal annealing process. The films deposited on SrTiO3(100) single crystal substrate indicated the existence of c-axis prefered orientation confirmed by XRD and SEM analysis. The Tc, zero's of sharp resistive transition for rapid annealed films deposited on polycrystalline YSZ substrate and on SrTiO3(100) single crystal substrate were 79K and 88K, respectively.