• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.5 s.182
• /
• pp.51-58
• /
• 2006

The necessities for heightening fuel efficiency as well as lightweight design, lead to an increase of the use of aluminum alloys in the automobile industry. Extruded aluminum profile channels are used widely for the design of frame parts as lightweight assemblies, especially if a high stiffness is needed. While many applications can be realized with forming of hollow square-sectioned extruded profiles such as a stretch bending and a hydro-forming, some applications demand the use of a press bending which can be hardly found in the previous study. In this study, by introducing the use of a press bending into car sub-frames, the demands for higher accuracy as well as higher flexible method than the conventional methods will be satisfied. With respect to the design of sub-frames, the process planning was performed from the shape of a sub-frame product. The designed processes were analyzed by the commercial FEM code, DEFORM-3D. Forming dies for the each process were designed and prototypes of sub-frames were manufactured by the verified farming process. In addition, some of the important features of design parameters in the press bending were reviewed.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.223-229
• /
• 2005

In this paper a coarse-to-fine optical flow detection method is proposed. Provided that optical flow gives reliable approximation to two-dimensional image motion, it can be used to recover the three-dimensional motion, but usually to set the reliable optical flows are difficult. The proposed algorithm uses Horn's algorithm for detecting initial optical flow, then Thin Plate Spline is introduced to warp a image frame of the initial optical flow to the next image frame. The optical flow for the warped image frame is again used iteratively until the mean square error between two image sequence frames is lowered. The proposed method is experimented for the real moving picture image sequence. The proposed algorithm gives dense optical flow vectors.

• International journal of steel structures
• /
• v.18 no.5
• /
• pp.1666-1683
• /
• 2018

To explore seismic behavior of blind bolted concrete-filled steel tube (CFST) frames infilled with precast sandwich composite wall panels (SCWPs), a series tests of blind bolted square CFST frames with precast SCWPs under lateral low-cyclic loading were conducted. The influence of the type of wall concrete, wall-to-frame connection and steel brace setting, etc. on the hysteretic curves and failure modes of the type of composite structure was investigated. The seismic behavior of the blind bolted CFST frames with precast SCWPs was evaluated in terms of lateral load-displacement relation curves, strength and stiffness degradation, crack patterns of SCWPs, energy dissipation capacity and ductility. Then, a finite element (FE) analysis modeling using ABAQUS software was developed in considering the nonlinear material properties and complex components interaction. Comparison indicated that the FE analytical results coincided well with the test results. Both the experimental and numerical results indicated that setting the external precast SCWPs could heighten the load carrying capacities and rigidities of the blind bolted CFST frames by using reasonable connectors between frame and SCWPs. These experimental studies and FE analysis would enable improvement in the practical design of the SCWPs in fabricated CFST structure buildings.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.8-15
• /
• 2020

In this paper, we propose a frame synchronization algorithm for robust to the combined effects of large Doppler fluctuations and extended, time-varying multipath in the underwater acoustic communication. From the algorithm, we can recover a high timing error which is occurred from an acoustic propagation delay and uncertainty of oscillator between transmitter and receiver. In order to verify the performance of the synchronization algorithm, the lake trial results are used. The lake experiments are performed in a Gyeongcheonho located in Mungyeong-si, Gyeongsangbuk-do. We can see that the start position of frame is adjusted after the frame synchronization while the receiver moving.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.147-154
• /
• 1999

This study was performed to survey the exchange of frames on 83 persons. We investigated frame size, frame type, binocular prism effect etc. 80.4% among motives of frame-exchanges was a damage or corrosion. The type of frames was round-like 62.4% and 37.6% square-like. The size of frames was $49{\Box}18$ and vertical length 33mm on old-frames, $47{\Box}17$ and 31mm on new-frames. The scope of axis variation was average +3.20~3.80. According to estimation by the rule of RAL-RG 915, the inappropriate horizontal prism effect of new spectacles was 42.2%, more than 38.5% on old spectacles. The inappropriate vertical prism effect was 24.1% on old, 33.7% on new spectacles.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.7
• /
• pp.33-41
• /
• 1994

A single channel adaptive noise canceling (ANC) technique with a recursive time delay estimator (RTDE) is presented for removing effects of additive noise on the speech signal. While the conventional method makes a reference signal for the adaptive filter using the pitch estimated on a frame basis from the input speech, the proposed method makes the reference signal using the delay estimated recursively on a sample-by-sample basis. As the RTDEs, the recursion formulae of autocorrelation function (ACF) and average magnitude difference function (AMDF) are derived. The normalized least mean square (NLMS) and recursive least square (RLS) algorithms are applied for adaptation of filter coefficients. Experimental results with noisy speech demonstrate that the proposed method improves the perceived speech quality as well as the signal-to-noise ratio and cepstral distance when compared with the conventional method.

• Journal of Mechanical Science and Technology
• /
• v.17 no.10
• /
• pp.1552-1562
• /
• 2003

In this paper, we propose a new PIV methodology for obtaining a velocity field from a sequence of multiple image data based on a least-square principle (also known as MQD; minimum quadratic difference) for the grey level difference between two neighboring frames of image data. We investigated both the accuracy of the result and the time consumption in the computation. It turns out that the proposed method is not only accurate but fast compared with the conventional correlation PIV techniques. Our method is applied to the spin-up flows and the results show that the method can be a good substitution for the conventional algorithms employed in the existing commercial codes.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.3
• /
• pp.149-156
• /
• 2020

The vibration control device such as the damper can be used to reinforce the seismic performance of structures. The damper is activated by the deformation of structures during earthquake; however, the deformation of structures is extremely small, causing difficulty in using the damper. Therefore, there is a need for a method capable of amplifying small deformities and transmitting them to the damper. The purpose of this paper is to develop and evaluate a displacement amplification seismic system using cable-pulley. The appropriate cable was selected through a cable tensile performance test and the results of the frame experiment were compared with theoretical displacement amplification ratio values. As a result, it may be said that the proposed system using cable-pulley is useful for displacement amplification.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.463-472
• /
• 1998

The purpose of this paper is to analyze the buckling characteristics of rigidly-jointed single-layer latticed domes with square network by using the experimental and the theoretical techniques in order to develop a reasonable method of theoretical analysis for these domes. Two methods of theoretical analysis are applied; one is based on the Yamada's method of shell analogy and the other is based on the frame analysis method using the finite element method. The effects of the nonuniformity of rigidity-distribution in the circumferential direction and the rigidity of the covering material on both the prebuckling and the buckling characteristics are examined. The results indicate that these effects should be considered reasonably in the theoretical analyses.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.5
• /
• pp.467-473
• /
• 2007

In this paper, we present a position-based robot hand tracking scheme where a pan-tilt camera is controlled such that a robot hand is always shown in the center of an image frame. We calculate the rotation angles of a pan-tilt camera by transforming the coordinate systems. In order to identify the model parameters, we applied two optimization techniques: a nonlinear least square optimizer and a particle swarm optimizer. From the simulation results, it is shown that the considered parameter identification problem is characterized by a highly multimodal landscape; thus, a global optimization technique such as a particle swarm optimization could be a promising tool to identify the model parameters of a robot hand tracking system, whereas the nonlinear least square optimizer often failed to find an optimal solution even when the initial candidate solutions were selected close to the true optimum.