• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.38.1-38.13
• /
• 2019

The application of botulinum in oral and maxillofacial surgery begins in 1982, where Jan Carruthers started using it for reducing the muscle mass and smoothing the skin, and since then it has been used for cosmetic purposes. In Korea, it is already being used by various specialties including dentistry (oral and maxillofacial surgery, oral medicine), plastic surgery, dermatology, ophthalmology, general surgery, and orthopedic surgery, etc. Each specialty approaches to Botox with its own medical indications. In this article, we will discuss the maxillofacial application of botulinum toxin, which includes theoretical and practical aspects of such as bruxism and square jaw.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.137-144
• /
• 2021

Purpose: This study aimed to investigate the accuracy of head scatter factor (S_c) by applying a developed multi-leaf collimator (MLC) scatter source model for an unflattened photon beam. Methods: Sets of S_c values were measured for various jaw-defined square and rectangular fields and MLC-defined square fields for developing dual-source model (DSM) and MLC scatter model. A 6 MV unflattened photon beam has been used. Measurements were performed using a 0.125 cm³ cylindrical ionization chamber and a mini phantom. Then, the parameters of both models have been optimized, and S_c has been calculated. The DSM and MLC scatter models have been verified by comparing the calculated values to the three S_c set measurement values of the jaw-defined field and the two S_c set measurement values of MLC-defined fields used in the existing modeling, respectively. Results: For jaw-defined fields, the calculated S_c using the DSM was consistent with the measured S_c value. This demonstrates that the DSM was properly optimized and modeled for the measured values. For the MLC-defined fields, the accuracy between the calculated and measured S_c values with the addition of the MLC scatter source appeared to be high, but the only use of the DSM resulted in a significantly bigger differences. Conclusions: Both the DSM and MLC models could also be applied to an unflattened beam. When considering scattered radiation from the MLC by adding an MLC scatter source model, it showed a higher degree of agreement with the actual measured S_c value than when using only DSM in the same way as in previous studies.

• Journal of Korean Dental Science
• /
• v.1 no.1
• /
• pp.15-21
• /
• 2008

Purpose : This epidemiological research was conducted to investigate the relationship between the groups of TMD and the behavioral, psychological, and physical symptoms through RDC/TMD. Subjects and Methods : The subjects of this research were the 286 patients who had visited Seoul National University Bundang Hospital; their common chief complaint was temporomandibular discomfort. The mean age of the patients was 32.9 from 11 to 85, and the number of men and women was 67 and 219, respectively. The patients were examined through clinical and radiological methods and diagnosed by 1 investigator. They were divided into 3 groups: myogenous group (group 1), arthrogenous group (group 2), and combined group (group 3). The behavioral, psychological, and physical symptoms were evaluated through questionnaires on RDC/TMD. Specific items were selected to calculate the graded chronic pain (characteristic pain intensity, disability points), jaw disability, depression, and non-specific physical symptoms (pain items included/excluded) in the questionnaire. One-way ANOVA, Kruskal-Wallis test, and chi-square test were applied as statistical methods. Results : As a result of classifying temporomandibular disorder in this study, the patients were distributed as follows: 9.1% of group 1, 79.7% of group 2, and 11.2% of group 3. In the analysis of graded chronic pain (characteristic pain intensity, disability points), jaw disability, and non-specific physical symptoms (pain items included/excluded), group 3 had the highest score, and the difference was significant (p<0.001). Moreover, the depression score of group 3 was significantly higher than groups 1 and 2 (p<0.05). Note that that the second order of jaw disability score was group 2, on the other hand, those of the other groups were group 1. Conclusion : Myofascial pain could be assumed to be related closely to the behavioral, psychological, and physical symptoms except jaw disability compared to joint pain through RDC/TMD.

• The Journal of Korean Society for Radiation Therapy
• /
• v.11 no.1
• /
• pp.6-10
• /
• 1999

The field size can be beam output, therefore MonitorUnit can be varied due to field size dependence The purpose of this study is to evaluate and compare the dose variation according to exchange of collimator The measurements were perfomed with Wellhofer dosimetry system(water phantom. ion chamber. electrometer. system controller. build up cap. etc)and two types of linear accerlerator (Mevatron KD, MevatronMX) Scatter can be affected to field size dependence and scatter correction is separated into collimator and phantom components, scatter components can affect by exchanging of collimator Measurements of collimator scatter factor(Sc) was done in air with build up cap. 1)Square field (5cm2 to 40cm2) was measured 2)and then keeping the upper jaw constant at loom and varing lower jaw from 5cm to 40cm, 3)keeping the lower jaw constant at 10cm and varing upper jaw from 5cm to 40cm Measurements of total scatter factor(Scp) was done in water at Dmax as the procedure of collimator scatter factor measurements in water Dmax The total scatter factors were obtained to the following equation(Sp=Scp/Sc) The measured data is normalized to the data of reference field size($10{\times}10$), rectangular field is inverted to equivalent field to compare three field size data As the collimator setting is varied, the output was changed In conclusion, the error was obtained small but it must be eliminated if we intend to reach the common stated goal of $5\%$ overall uncertainty in dose determination

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.4
• /
• pp.526-543
• /
• 2000

Finite element analyses were performed to study effects on stress distribution generated in jaw bone for various shapes of dental implants: plateau type, plateau with small radius of curvature, triangular thread screw type in accordance with ISO regulations and square thread screw filleted with small radius partially. It was found that square thread screw filleted with small radius was more effective on stress distribution than other dental implants used in analyses. Additional analyses were performed on the implant with square thread screw filleted with small radius for very-ing design parameters, such as the width of thread end, the height of the thread of the implant and load direction, to determine the optimum dimensions of the implant. The highest stress concentration occurred at the region in jaw Pone adjacent to the first thread of the implant. The maximum effective stress induced by a 15 degree oblique load of 100 N was twice as high as the maximum effective stress caused by an equal amount of vertical load. Stress distribution was more effective in the case when the width of thread end and the height of thread were p/2 and 0.46p, respectively, where p is the pitch of thread. At last, using tensile force calculated from the possible insert torque without breading bone thread, finite element analysis was performed on the implant to calculate pre-stress when the primary fixation of the implant was operated in jaw bone. The maximum effective stress was 136.8 MPa which was proven to be safe.

• Journal of Korean Dental Science
• /
• v.7 no.1
• /
• pp.16-24
• /
• 2014

Purpose: This study was planned to clarify a negative view of chewing gum due to the concern that continuous gum chewing might cause a change in the gonial angle and make the lower facial appearance look square. Materials and Methods: We had 25 adults (13 males and 12 females, with an average of 27.3 years) chew 6 g of gum (spearmint) evenly with both right and left posterior teeth for one hour per day for three months. We then measured their gonial angle, the inclination of occlusal plane, facial height, bone marrow density, and masticatory force before chewing, 1, 2, and 3 month after chewing to verify its significance statistically. Result: The results showed that the gonial angle increased from $122.7^{\circ}$ to $123.3^{\circ}$ (P>0.05), and thus the jaws became slightly slimmer. There was no change in the occlusal plane inclination and facial height. Meanwhile bone marrow density in the mandibular angle and ascending ramus increased from $0.285g/cm^2$ to $0.290g/cm^2$ (P<0.05), and masticatory force also increased by 0.5 kg on the right side and 0.8 kg on the left side (P<0.05). Conclusion: Continuous chewing of gum gives an appropriate exercise effect to the stomatognathic system. As chewing gum has effect on increase bone marrow density without changing the mandibular angle and facial appearance the claim that jaw bone changes to a square jaw through chewing gum is regarded to be groundless.

• Imaging Science in Dentistry
• /
• v.49 no.4
• /
• pp.281-286
• /
• 2019

Purpose: The purpose of this study was to evaluate the morphology of the mandibular cortex in cases of medication-related osteonecrosis of the jaw (MRONJ) in patients with osteoporosis or bone metastases using a computer programme. Materials and Methods: Fifty-four patients with MRONJ (35 with osteoporosis and 19 with bone metastases) were examined using panoramic radiography. The morphology of the mandibular cortex was evaluated using a computer programme that scanned the mandibular inferior cortex and automatically assessed the mandibular cortical index (MCI) according to the thickness and roughness of the mandibular cortex, as follows: normal (class 1), mildly to moderately eroded (class 2), or severely eroded (class 3). The MCI classifications of MRONJ patients with osteoporosis or bone metastases were evaluated with the Pearson chi-square test. In these analyses, a 5% significance level was used. Results: The MCI of MRONJ patients with osteoporosis(class 1: 6, class 2: 15, class 3: 14) tended to be higher than that of patients with bone metastases(class 1: 14, class 2: 5, class 3: 0)(P=0.000). Conclusion: The use of a computer programme to assess mandibular cortex morphology may be an effective technique for the objective and quantitative evaluation of the MCI in MRONJ patients with osteoporosis or bone metastases.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.4
• /
• pp.266-274
• /
• 2020

Objectives: Melatonin induces human stem cells, converts pre-osteoblasts to mature osteoblasts, and reduces the duration of this transition. However, melatonin itself prevents activation of osteoclasts. Here, we evaluate the role of melatonin in prevention of bisphosphonate-related osteonecrosis of the jaw. Materials and Methods: In this experimental-interventional study, 30 rats were evaluated in 3 groups. The first and second groups received saline and zoledronic acid, respectively, for 4 weeks and the third group received 4 weeks of zoledronic acid and 3 weeks of melatonin simultaneously. First-right-maxillary-molar extraction was performed for all animals, which were sacrificed after 4 weeks of recovery. The extraction sockets were examined histologically for the presence of osteonecrosis, number of osteoclasts and fibroblasts, severity of inflammation, and vascularization. Data were analyzed by chi-square, one-way ANOVA, Tukey, Kruskal-Wallis and Fisher's exact statistical tests (α=0.05). Results: Osteonecrosis was observed in 20%, 90%, and 70% of the first, second and third groups, respectively (P=0.008). The lowest number of osteoclasts and fibroblasts was seen in the third group. Conclusion: Melatonin may effectively prevent some undesirable side effects of bisphosphonates. However, further studies are required to confirm the results of this study.

• Imaging Science in Dentistry
• /
• v.51 no.1
• /
• pp.73-80
• /
• 2021

Purpose: The purpose of this study was to evaluate the cone-beam computed tomographic (CBCT) imaging and histopathological characteristics of osteoradionecrosis(ORN) and medication-related osteonecrosis of the jaw(MRONJ). Materials and Methods: Ten surgical specimens from segmental mandibulectomy (3 ORN and 7 MRONJ) were analyzed using CBCT. The CBCT parameters were as follows: high-resolution mode (tube voltage, 90.0 kV; tube current, 4.00 mA; rotation time, 16.8 s; field of view, 56 mm×56 mm; thickness, 0.099 mm). Histopathological characteristics were evaluated using histological slides of the surgical specimens. The Pearson chi-square test was used to compare ORN and MRONJ in terms of CBCT findings(internal texture, sequestrum, periosteal reaction and cortical perforation) and histopathological characteristics(necrotic bone, inflammatory cells, reactive bone formation, bacteria, Actinomyces, and osteoclasts). A P value less than 0.05 was considered to indicate statistical significance. Results: MRONJ showed periosteal reaction on CBCT more frequently than ORN (7 of 7 [100%] vs. 0 of 3 [0%], P<0.05). Regarding histopathological characteristics, MRONJ showed osteoclasts more frequently than ORN (6 of 7 [85.7%] vs. 0 of 3 [0%], P<0.05). Conclusion: This study evaluated the CBCT imaging and histopathological characteristics of ORN and MRONJ, and the findings suggest that CBCT could be useful for the evaluation of ORN and MRONJ.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.45.1-45.9
• /
• 2019

Botulinum toxin (BTX) has various therapeutic indications: bruxism, square jaw, facial wrinkle, oral ulcer and maxillofacial pain, etc. In this paper, we will discuss the effectiveness of using BTX in dental implant surgery and orthognathic and orthodontic treatment. We summarized the clinical application of botulinum toxin in the maxillofacial field at the finale.