• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.5
• /
• pp.906-919
• /
• 2015

The Deep Draft Semi-Submersible (DDS) concepts are known for their favourable vertical motion performance. However, the DDS may experience critical Vortex-Induced Motion (VIM) stemming from the fluctuating forces on the columns. In order to investigate the current-induced excitation forces of VIM, an experimental study of flow characteristics around four square-section cylinders in a square configuration is presented. A number of column spacing ratios and array attack angles were considered to investigate the parametric influences. The results comprise flow patterns, drag and lift forces, as well as Strouhal numbers. It is shown that both the drag and lift forces acting on the cylinders are slightly different between the various L/D values, and the fluctuating forces peak at L/D = 4.14. The lift force of downstream cylinders reaches its maximum at around ${\alpha}=15^{\circ}$. Furthermore, the flow around circular-section-cylinder arrays is also discussed in comparison with that of square cylinders.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.655-657
• /
• 2015

The Australia Telescope National Facility (ATNF) consists of the Parkes and Mopra radio telescopes, and the Australia Telescope Compact Array, with the first elements of the wide-field Australian Square Kilometer Array Pathfinder (ASKAP), currently being commissioned. The capabilities of these facilities are described.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.715-718
• /
• 2002

TX/RX dual microstrip 1$\times$8 sub-array antennas are designed, fabricated, and measured for a wideband array antennas in communications. They have a Right Handed Circular Polarization (RHCP) for TX from 7.9 to 8.4 GHz and Left Handed Circular Polarization (LHCP) for RX from 7.25 to 7.75 GHz. Two stacked patches are used for a wideband characteristics and cornertruncated square patches are adopted for a circular polarization. To enhance bandwidth characteristics of a circular polarization, 1$\times$2 sequential rotation arrays are applied. From the measured results, 1$\times$8 microstrip sub-array antennas have a good agreement with those of the simulation. Therefore the sub-array antennas are applicable to satellite communication antennas, active phased array antennas, and radiators in other antennas.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.886-891
• /
• 2000

In this paper, an iterative array shape estimation technique is presented, which is based on the use of the least squares polynomial fitting to the data from heading sensors. The estimated polynomial shape model is then used for calculating the hydrophone positions on the assumption that the arc distances between sensors are constant. In order to verify the applicability of the proposed algorithm, numerical simulations are performed using two types of non-linear array shapes. In addition the noise effects of heading sensors on the array shape estimation results and the performance of beamformer are also investigated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1896-1911
• /
• 1997

Effects of fiber-matrix interphases on the micro-and macro-mechanical behaviors of unidirectionally fiber-reinforced composites subjected to transverse shear loading at remote distance have been studied. The interphases between fibers and matrix have been modeled by the spring-layer which accounts for continuity of tractions, but allows radial and circumferential displacement jumps across the interphase that are linearly related to the normal and tangential tractions. Numerical calculations for basic cells of the composites have been carried out using the boundary element method. For an undamaged composite the micro-level stresses at the matrix side of the interphase and effective shear stiffness have been computed as functions of fiber volume ratio $V_f$ and interphase stiffness k. Results are presented for various interphase stiffnesses from the perfect bonding to the case of total debonding. For a square array composite the results show that for a high interphase stiffness k>10, an increase of $V_f$ increases the effective transverse shear modulus G over bar of the composite. For a relatively low interphase stiffness k<1, it is shwon that an increase of $V_f$ slightly decreases the effective transverse shear modulus. For the perfect bonding case, G over bar for a hexagonal array composite is slightly larger than that for a square array composite. Also for a damaged composite partially debonded at the interphase, local stress fields and effective shear modulus are calculated and a decrease in G over bar has been observed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.164-171
• /
• 2014

Transmit(Tx)/Receive(Rx) dual band operation microstrip array for X-band satellite communications are designed, fabricated, and measured in this paper. The microstrip array antenna has Right Handed Circular Polarization(RHCP) for Tx band and Left Hand Circular Polarization(LHCP) for Rx band. Two stacked patches are used for wideband characteristics and corner-truncated square patches are adopted for a circular polarization. To enhance bandwidth characteristics of a circular polarization, $2{\times}2$ sequential rotation array are applied. From the measured result, $8{\times}12$ microstrip array antennas have a good agreement with those of the simulation. Therefore the array antennas are applicable to military satellite communication antennas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.6
• /
• pp.438-444
• /
• 2019

In this paper, we proposed a 16-element array antenna design to improve signal detection performances. The array antenna characteristics, such as mutual coupling, pattern deviation, and half power beamwidth of the active element, were examined to obtain an optimal spacing between individual elements. The single element of the array antenna consists of an indirect feed using L-shaped feed and shorted radiating patch to achieve a broadband operation. Root mean square(RMS) errors based on the incident angle of the signal were calculated to verify the signal detection performance of the proposed antenna. The results demonstrate that the proposed array antenna with optimal spacing is suitable for detecting interference signals with low RMS error.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.100-103
• /
• 2007

A microlens array has been required to improve light conversion efficiency in image sensors. A microlens array can be usually fabricated by photoresist reflow, hot-embossing, micro injection molding, and UV-imprinting. Among these processes, a UV-imprinting, which is operated at room temperature with relatively low applied pressure, can be a desirable process to integrate microlens array on image sensors, because this process provides the components with low thermal expansion, enhanced stability, and low birefringence, furthermore, it is more suitable for mass production of high quality microlens array. In this study, to analyze the optical properties of the wafer scale microlens array integrated image sensor, another wafer scale simulated image sensor chip array was designed and fabricated. An aspherical square microlens was designed and integrated on a simulated image sensor chip array using a UV-imprinting process. Finally, the optical performances were measured and analyzed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.496-498
• /
• 2003

접미사 배열은 긴 문자열에 대해 효율적인 문자열 검색을 가능하게 하는 자료구조이다. 접미사 배열은 문자열의 접미사들의 사전식 정렬순서를 배열로 저장한다. 비슷한 효과를 가진 접미사 트리에 비해서 접미사 배열은 저장 공간을 적게 차지하기 때문에 생명정보과학의 염기 서열 등 큰 크기의 문자열의 처리에 더욱 유리하다. 본 논문에서는 2003년에 발표된 Ko-Aluru, K$\square$rkk$\square$inen-Sanders 및 기존의 Manber-Myers 등 세 개의 접미사 배열 생성 알고리즘들의 염기 서열 입력 자료에 대한 실행 시간 및 기억 장치 사용량을 실험을 통해 비교한다. 특히 Ko-Aluru와 K$\square$rkk$\square$inen-Sanders 알고리즘은 실행 시간 및 저장 공간의 이론적인 복잡도가 O(n)으로 동일하기 때문에 실험을 통해서 계산 복잡도에 숨어있는 상수를 비교한다. 실험 결과 K$\square$rkk$\square$inen-Sanders 알고리즘이 가장 효율적임을 보인다.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.489-496
• /
• 2001

Two perforated plates are used to investigate local heat/mass transfer characteristics in an impingement/effusion cooling system. A naphthalene sublimation method is conducted to determine the local heat/mass transfer coefficients on the upward facing surface of the effusion plate. The two plates are placed in parallel position with gap distances of 1, 2, 4 and 6 times of effusion hole diameter. The effects of hole arrangements of the plates are studied for staggered, square, and hexagonal arrays. The experiments are conducted at Reynolds number of 10,000 based on the effusion hole diameter. The results show that the smaller hole size in the staggered array has the higher transfer coefficients on the stagnation region due to the formation of higher momentum flows through the impingement holes. In the square array, heat/mass transfer on the target plate is more uniform as the number of impingement holes increases. High and uniform heat/mass transfer coefficients are obtained in the hexagonal array.