• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.783-798
• /
• 2004

This experiment were conducted to determine the formation of fatty acid soaps, digestibility and ruminal characteristics when vegetable oils were added. Three Corriedale${\times}$ 3 Latin square design. Sheep were fed one of three diets consisting of alfalfa hay and concentrates in a ratio of 70:30. Dietary treatments were 1) no oil, 2) 7% soybean oil and 3) 7% corn oil. At the end of each experimental period, rumen contents from each sheep were collected before feeding and at 1, 3, 6 and 9h after feeding. pH decreased up to the 3 hour after feeding and increased until the end of the collection(p<0.0001). Whereas the concentration of $NH_3$-N showed inverse changes to pH(p<0.0001). Type of oil did not affect the molar concentration of total VFA, acetate, propionate and butyrate. Acetic/propionic acid (A/P) ratio decreased with increasing time(P<0.0001), but the ratio at the end of the experiment became similar to the initial value. No effects were found in the digestibility of dry matter, total-N, crude fiber, ash, NFE, NDF and ADF. The formation of fatty acid soaps(FAS) increased after feeding than 1 hour before feeding(P<0.05) and increased in 7% oils than no oil addition(P<0.05). Long chain fatty acids formed mainly FAS. ince the formation of FAS might decrease negative effects on ruminal haracteristics and total tract digestibility.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.541-549
• /
• 2008

The fatigue analysis is performed to avoid structural failure in aerospace structures under repeated loads. In this paper, the fatigue life is estimated for the design of tilt rotor UAV. First of all, the fatigue load spectrum for tilt rotor UAV is generated. Fatigue analysis is done for the flaperon joint which may have FCL(fracture critical location). Tilt rotor UAV operates at two modes: helicopter mode such as taking off and landing; fixed wing mode like cruising. To make overall fatigue load spectrum, FELIX is used for helicopter mode and TWIST is used for fixed wing mode. The other hand, the Kriging meta model is used to get S-N regression curve for whole range of material life when S-N test data are analyzed. And then, the second order of S-N curve is accomplished by the least square method. In addition, the coefficient of determination method is used to ensure how accuracy it has. Finally, the fatigue life of flaperon joint is compared with that obtained by MSC. Fatigue.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.732-738
• /
• 2020

This study examined the effects of hospice & palliative care education programs for nursing students, in terms of spiritual well-being and knowledge concerning advance directives. This is a quasi-experimental study of non-equivalent control groups, and includes a pre-test and post-test design. Data was collected between September to December 2018, enrolling third grade nursing college students attending a university in C city: 22 subjects in the experimental group and 27 subjects in the control group. The experimental group was provided the education as a regular subject, 2 hours a week for 7 weeks, for a total of 14 hours. Ed. Notes: I suggest you maintain any one unit for mentioning time. Hence, I changed 120 mins to 2 hours. Data were analyzed by X2 test, Fisher's exact, t-test, independent t-test, and paired t-test, using the SPSS 21.0 program. After attending the program, spiritual well-being showed a significant increase (t=2.80, p=0.009). However, there was no significant difference between groups in knowledge regarding advance directives (t=1.33, p=0.190). Our results indicate that the hospice & palliative care education program helps nursing students improve their score of spiritual well-being. We believe that these results contribute basic data for the future development of hospice-palliative care curriculum.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6169-6179
• /
• 2015

This study examined the effectiveness of a autonomous regulation improvement smoking cessation program in girls high school students. The study was carried out with a nonequivalent control group pretest-posttest design. The subjects of the present study were 47 girls high school students in G and K city. The subjects were divided into an experimental group (n=23) who participated in the autonomous regulation improvement smoking cessation program, and a control group (n=24) who did not participate. Data were collected from 1 April 2013 through 26 April 2013. Collected data were analyzed using SPSS PC+ 18.0 with the Chi-square test, Fisher' exact test, Mann-Whitney U test, t-test. The experimental group had significantly different in cigarettes smoked per day(p=.044), cotinine in saliva(p=.048), perceived motivation(p=.001) and autonomous regulation(p=.027) in comparison to the control group. The autonomous regulation improvement smoking cessation program, when delivered to girls high school students who smoked, was effective in discouraging the smoking habit, and can be utilized as an effective nursing intervention for girls high school students who smoke.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.301-308
• /
• 2014

Despite Korea forest take 63.7% of the nation's territory, productivity of domestic structural lumber is low. Studies of domestic small lumbers need to be improved domestic structural timber productivity. In this study, small diameter lumber and finger joint small diameter lumber took bending test to calculate MOE and MOR. MOE of small diameter lumber was $9.3kN/mm^2$ and MOE of finger joint small diameter lumber was $15.4kN/mm^2$. Allowable standard bending stress of small diameter lumber and finger joint small diameter lumber was calculated according to ASTM D 2915. Standard allowable bending stress of small diameter lumber was $12N/mm^2$ and standard allowable bending stress of finger joint small diameter lumber was $11N/mm^2$. Standard allowable bending stress of finger joint small diameter lumber should be considered to design structural beam members.

• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.29-42
• /
• 2012

Recently, traffic congestion has become serious due to increase of private car usages. Carsharing or other innovative public transportation systems were developed to alleviate traffic congestion and carbon emissions. These measures can make the traffic environment more comfortable, and efficient. Cloud Transportation System (CTS) is a recent carsharing model. User can rent an electronic vehicles with various traffic information through the CTS. In this study, a concept, vision and scenarios of CTS are introduced. And, authors analyzed the location of CTS rental stations and estimated CTS demands. Firstly, we analyze the number of the population, employees, students and traffic volume in study areas. Secondly, the frequency and utilization time are examined. Demand for CTS in each traffic zone was estimated. Lastly, the CTS rental station location is determined based on the analyzed data of the study areas. Evaluation standard of the determined location includes accessibility and density of population. And, the number of vehicles and that of parking zone at the rental station are estimated. The result suggests that Haewoondae Square parking lot would be assigned 11 vehicles and 14.23 parking spaces and that Dongbac parking lot be assigned 7.9 vehicles and 10.29 parking spaces. Further study requires additional real-time data for CTS to increase accuracy of the demand estimation. And network design would be developed for redistribution of vehicles.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.4
• /
• pp.379-388
• /
• 2001

Background : Cervix cancer is the most common form of cancer among Korea women. in spite of proof that cervical cancer screening could reduce death rates substantially, the screening rates reported by previous Korean studies remain stubbornly very low. Behavioral studies to increase the cervix cancer screening rate are essential in order to develop the cancer screening program. Objective : To evaluate the factors which are related to the intention and behavior for cervix cancer screening using the Theory of Planned Behavior (TPB) and the Theory of Reasoned Action (TRA). Methods : The survey was conducted from July 21 st to 26th in 1998. Of 3,218 women, 303(12.2%) between 30 and 55 years old, voluntarily participated in the survey in the 3 Myeons in Choongju city. Charge-free cervix cancer screening was provided for the subjects 3 months later. Results : The R-square of both TPB and TRA to the intention (30% and 42%, respectively) was greater than the actual behavior (21% and 13%, respectively. TPB and TRA were found to provide an appropriate framework for the study of cervix cancer screening behavior. However, TRA was more powerful in explaining the intention, not only because the perceived behavioral control component exhibited lower reliability and validity than other components(altitude and subjective norm), but also because there may have been a few limitations in this study design. Consequently, the use of TRA is preferred in attempting to explain intention and actual behavior in this study. Conclusions : This study suggests that a successful intervention program should focus on changing attitudes and reducing psychologic barriers, rather than on just providing information. Physician recommendations, and the support of family members and friends are also very important factors in cervix cancer program participation. Physicians, friends, family members, and opinion leaders in rural areas, all of whom could affect the individual subjective norm, may all have the potential to play great roles as facilitators.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.45-51
• /
• 2014

This study was conducted to investigate the feeding effects of total mixed fermentations (TMF) with spent mushroom (Flammuliua velutipes) and wet brewer's grain on estimating the productivity and nutrient utilization of Korean black goats. Four experimental groups were set up with each of the 5 animals for a 30-day feeding trial on growth performance. 12 black goats with regard to nutrient digestibility were allocated to 4 groups of 3 animals each by a latin-square design control group (offered concentrate and rice straw) and 3 treatment groups (TMF with 15% spent mushroom and 25% wet brewer's grain (T1), 10, 30% (T2) and 5, 35% (T3)). The average daily gain (ADG) of the control and T1 treatment groups was higher than that of the T3 treatment group (p<0.05). Dry matter (DM) and organic matter (OM) intake (kg/head) for T1 and T2 treatment groups were significantly higher than those of the control group (p<0.05). The digestibility of DM and OM for the control group (62.39~63.39%) and the T1 treatment group (65.02~65.25%) were significantly higher than those of the T3 treatment group (56.39, 59.01%) (p<0.05). Further, nitrogen retention was significantly higher in the T1 treatment group (p<0.05). Thus, these results conveyed that productivity and nutrient utilization were similar between TMF with spent mushroom and wet brewer's grain and commercial feeds. However, this study also suggested that feed must contain 25~30% spent mushroom due to the fact that the productivity of Korean black goats was decreased by increasing the content of spent mushroom.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.156-162
• /
• 2016

This study was conducted to investigate the effects of a death education program on self-esteem, spiritual well-being, and pain in adults. This investigations employed a nonequivalent control group non-synchronized design, and was performed in C hospital located in Chungju, Chungcheongbukdo province, Korea from January 4-13, 2016. The study included 48 participants who agreed to enrolled. Participants were randomly divided into an experimental and a control group of 22 and 26 applicants each. Participants (n=22) in the experimental group participated in the death education program for 2 hours, three times a week for 2 weeks. The effects of treatment were measured using a structured questionnaire to evaluate self-esteem, spiritual well-being, and pain before and after 2 weeks of intervention. Data were analyzed using a t-test, chi-squared test, Fisher's Exact-test and a paired t-test. The experimental group showed significantly increased self-esteem (P<0.002) and spiritual well-being (P<0.015), and significantly reduced pain (P<0.014) compared to the control group after 2 weeks of intervention. Overall, the death education program was shown to be an effective nursing intervention for adults; therefore, of its use in various fields should be considered.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.391-397
• /
• 2017

Recently, digital image correlation (DIC) techniques have been used to measure dynamic deformation during tensile testing. The standard tensile test method measures the average displacement of the relevant specimen to calculate the true stress-strain curve. Therefore, the validity of the true stress curve is restricted to the stress incurred within the uniform stretching interval, i.e., the maximum stress corresponds to the starting point of the necking deformation. Alternatively, if DIC is used, the effective range of the strain and strain rate can be extended to the breaking point of the tensile specimen, because of the feasibility of measuring the local strain over the entire area of interest. Because of these advantages, many optical 3D measurement systems have been introduced and used in research and industry. However, the conventional 3D measurement systems are exceedingly expensive and time consuming. In addition, these systems have the disadvantage of a very large equipment size which makes their transport difficult. In this study, a 2D image correction method employing a 2D DIC measurement method in conjunction with a numerical analysis method is developed using a smartphone. The results of the proposed modified 2D DIC method yielded higher accuracy than that obtained via the 3D measurement equipment. In conclusion, it was demonstrated that the proposed 2D DIC and calibration methods yield accurate measurement results with low time costs.