• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.664-667
• /
• 1997

In this study, it is attempted to obtain the optimized size of holes in 15 square plate models where a hole exists on every quadrant of a plate, and to get eigenvalues and mode shapes by performing free vibration analysis for each model. For free vibration analysis and optimization of' hole sizes, the uniaxial tension is applied for the loading condition. From the results of this study, it is known that more stable structures can be designed by changing the natural frequency depending on the location and the optuiiunl size of holes. and further studies are considered to be necessary for the basic design information.

• Coupled systems mechanics
• /
• 제5권4호
• /
• pp.371-393
• /
• 2016

We propose a heat jet approach for a two-dimensional square lattice with nearest neighbouring harmonic interaction. First, we design a two-way matching boundary condition that linearly relates the displacement and velocity at atoms near the boundary, and a suitable input in terms of given incoming wave modes. Then a phonon representation for finite temperature lattice motion is adopted. The proposed approach is simple and compact. Numerical tests validate the effectiveness of the boundary condition in reflection suppression for outgoing waves. It maintains target temperature for the lattice, with expected kinetic energy distribution and heat flux. Moreover, its linear nature facilitates reliable finite temperature atomic simulations with a correct description for non-thermal motions.

• Geomechanics and Engineering
• /
• 제9권3호
• /
• pp.287-311
• /
• 2015

The ultimate bearing capacity and failure mechanism of square footings resting on a sand layer over clay soil have been investigated numerically by performing a series of three-dimensional non-linear finite element analyses. The parameters investigated are the thickness of upper sand layer, strength of sand, undrained shear strength of lower clay and surcharge effect. The results obtained from finite element analyses were compared with those from previous design methods based on limit equilibrium approach. The results proved that the parameters investigated had considerable effect on the ultimate bearing capacity and failure mechanism occurring. It was also shown that the thickness of upper sand layer, the undrained shear strength of lower clay and the strength of sand are the most important parameters affecting the type of failure will occur. The value of the ultimate bearing capacity could be significantly different depending on the limit equilibrium method used.

• 대한전자공학회논문지TC
• /
• 제49권5호
• /
• pp.15-20
• /
• 2012

본논문을 통해, 리드솔로몬 복호기에서 매우 복잡한 나누기회로를 사용않고, 오류위치를 찾아내는 치엔기기의 최적설계기법을 제시했다. 최적화는 매우 간단한 제곱/4제곱회로를 사용하고, 병렬처리를 통해 가능했다. 이법은 현대 디지털 통신및/가전기기 대부분에 응용되질수 있다.

• ETRI Journal
• /
• 제32권6호
• /
• pp.911-920
• /
• 2010

This paper presents a method of designing hybrid analog/asymmetrical square-root (SR) FIR filters. In addition to the conventional frequency domain constraints, the proposed method considers time-domain constraints as well, including the inter-symbol interference (ISI) and the opening of the eye pattern at the receiver output. This paper also reviews a systematic way to find the discrete-time equivalence of analog parts in a band-limited digital communication system. Thus, a phase equalizer can be easily realized to compensate for the nonlinear phase responses of the analog components. With the hybrid analog/SR FIR filter co-design, examples show that using the proposed method can result in a more robust ISI performance in the presence of the receiver clock jitter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.162-167
• /
• 2003

In this paper, a novel feasible real-time system was researched for a differential driven wheeled autonomous mobile robot so that the mobile robot can move in a smooth, safe and elegant way. Least Square Minimum Path Planning was well used for the system to generate a smooth executable path for the mobile robot, and the point-to-point tracking algorithm was presented as well as its application in arbitrary path tracking. In order to make sure the robot can run elegantly and safely, trapezoidal speed was integrated into the point-to-point path tracking algorithm. The application to guest following for the autonomous mobile robot shows its wide application of the algorithm. The novel design was successfully proved to be feasible by our experiments on our mobile robot Interactive Robot Usher (IRU) in National University of Singapore.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.123-126
• /
• 2005

In this paper, we propose a multiple slotted dual-band square patch antenna with CP(Circular Polarization) characteristic. And we present the simulation and measurement results of the design example. We designed a slotted patch antenna by using computer simulation program, Zeland IE3D, and then some tuning followed with measurements. Measured -10dB bandwidths of $S_{11}$ characteristic are 127MHz($2.346GHz{\sim}2.473GHz$) for the low-band, and 122MHz($3.379GHz{\sim}3.501GHz$) for the high-band, respectively. And measured maximum gains and half-power beamwidths are 6.94dBi, $72.95^{\circ}$ for the low-band at 2.30GHz, 5.78dBi, $76.51^{\circ}$ for the high-band at 3.45GHz, respectively.

• The Journal of the Acoustical Society of Korea
• /
• 제15권2E호
• /
• pp.24-32
• /
• 1996

A rigorous theory for modeling, analysis, optimum nonseparable filter bank in multidimensional M-band quantized subband codec are developed in this paper. Each pdf-optimized quantizer is modeled by a nonlinear gain-plus-additive uncorrelated noise and embedded into the subband structure. We then decompose the analysis/synthesis filter banks into their polyphase components and shift the down-and up-samplers to the right and left of the analysis/synthesis polyphase matrices respectively. Focusing on the slow clock rate signal between the samplers, we derive the exact expression for the output mean square quantization error by using spatial-invariant analysis. We show that this error can be represented by two uncorrelated components : a distortion component due to the quantizer gain, and a random noise component due to fictitious uncorrelated noise at the uantizer. This mean square error is then minimized subject to perfect reconstruction (PR) constraints and the total bit allocation for the entire filter bank. The algorithm gives filter coefficients and subband bit allocations. Numerical design example for the optimum nonseparable orthonormal filter bank is given with a quincunx subsampling lattice.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.74-82
• /
• 2004

In this paper, a disturbance feedforward compensator design technique is proposed for an active magnetic bearing system subject to base motion for attenuating disturbance responses. In the consideration of the requirements on the model accuracy in the model based compensator designs, an experimental feedforward compensator design based on adaptive estimation by means of the Multiple Filtered-x least mean square(MFXLMS) algorithm is proposed. The performance and the effectiveness of the proposed technique will be presented in the succeeding paper in which the proposed technique is applied to a 2-DOF active magnetic bearing system subject to base motion.

• 대한산업공학회지
• /
• 제39권5호
• /
• pp.367-373
• /
• 2013

In this article, we deal with a design problem for determining the levels of noise factors in the Taguchi method. First, the proposed levels by Taguchi method is reviewed in case of smaller-the-better performance characteristics. We obtain the optimal levels of noise factors minimizing the mean square error of SN(signal to Noise) ratio and compare the optimal levels with the levels proposed by Taguchi method under the first and second order models. Secondly, the concept of V-optimality is applied to determining the levels of noise factors.