• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.45-48
• /
• 1999

A program for initial blank design in sheet forming which contains the capabilities of forward loading simulation by the finite element method and backward tracking simulation has been developed and proved the effectiveness by applying to a square cup stamping process. In the blank design of square cup stamping the backward tracing program can produce an optimum blank configuration which forms a sound net-shape cup produce without machining after forming. Another general application appears in the blank design of a cup stamping with protruding flanges one of typical automobile components. The blank configurations derived by backward tracing simulation have been confirmed by a series of loading simulations. The approach for decision of an initial blank configuration presented in this study will be a milestone in fields of sheet forming process design.

• 대한전자공학회논문지TC
• /
• 제40권2호
• /
• pp.64-69
• /
• 2003

본 논문에서는 통신 시스템에서 많이 사용되는 자승근(Square-root)형 파형성형 필터인 Raised Cosine Filter. 즉 SRCF를 기존의 최적 필터 설계 방식을 사용하여 등리플(equiripple)로 설계하는 간단한 방법을 제시한다. 몇 개의 예제를 통하여 제안된 필터는 기존의 SRCF에 비해 약간의 ISI 성능 저하가 발생하지만, 대역 특성이 훨씬 우수함을 보이면서도 기존의 SRCF와 호환성을 가지고 있는 장점이 있다. 제안된 방식으로 WCDMA에서 정의한 a=0.22의 RRC(Root Raised Cosine) 필터를 12비트로 설계한 것을 제시하였다.

• Design & Manufacturing
• /
• 제2권1호
• /
• pp.7-10
• /
• 2008

Restriking method is to add to process in order to get the correct size and high precision accuracy of product which is formed in pre-process. This method is widely used at bending work and drawing work. Restriking die is particularly design and used as restriking process is performed. Therefore, production cost is increasing as one process or a two process are added. In this paper, punches and die block of square shell drawing die which could be performed drawing work and restriking process by using only one die are designed in order to solve these factors. The structure of sectional die which can integrate drawing die and restriking die was developed.

• 한국농공학회지
• /
• 제42권3호
• /
• pp.45-55
• /
• 2000

This study was carried out to derive optimal design low flows bythe Weibull-3 and Wakeby distributions for the partial consecutive duration series at seven watersheds along Han. nagdong, Geum Yeongsan and Seomjin river systems. L-coefficient of variation L-skewness and L-kurtosis were calculated by the L-moment ratio respectively. Parameters were estimated by the method of L-Moments with consecutive duration. Design low flows obtained by method of L-Moments using with consecutive duration, Design low flows obtained by method of L-Moments using different methods for plotting positions formulas in the Weibull-3 and Wakeby distributions were compared by the Root Mean Square Errors(RMSE). It has shown that design low flows derived by the method of L-moments using Weivull plotting position formula in Wakeby distribution were much closer to those of the observed data in comparison with those obtained by the methods of L-moments with the different formulas for plotting positions in Weibull-3 distribution from the viewpoint of Root Mean Square Errors.

• 한국정보처리학회논문지
• /
• 제7권1호
• /
• pp.266-272
• /
• 2000

제곱 테이블을 이용한 곱셈 방법은 처리과정을 간단히 하고 속도도 향상시킨다. 그러나, 비트 길이가 증가함에 따라 테이블 크기는 지수 승으로 증가하게 된다. 최근에 Wey와 Shieh는 고속 곱셈이 요구되는 응용분야에 적합한 폴딩 기법을 이용한 우수한 제곱 발생기를 제안하였다. 이 기법은 ROM 주소에 대한 1의 보수 값을 이용하여 제곱 값을 위한 거대한 테이블을 계속 폴딩함으로써 필요한 테이블의 크기를 작게 만들어 ROM의 크기를 줄일 수 있도록 한다. 본 논문에서는 Wey와 Shieh의 기법에서 1의 보수 부분이 필요 없는 개선된 폴딩 기법을 제안한다. 그리고 제안된 방법은 중간 과정에서 필요한 부분 합의 비트 길이를 줄임으로써 하드웨어 구현을 쉽게 하고 성능을 더욱 향상시킨다.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.501-506
• /
• 2005

With the respective collapse characteristics of aluminum and CFRP (Carbon Fiber Reinforced Plastics) tubes in mind, axial collapse tests were performed for aluminum/CFRP compound tubes, which are composed of square or circular shaped aluminum tubes wrapped with CFRP outside. In this study, the collapse modes and the energy absorption characteristics were analyzed for aluminum/CFRP compound tubes which have different fiber orientation angle of CFRP. Fracture modes in the aluminum/CFRP compound tubes were rather stable than those in the CFRP tubes alone, probably due to the ductile nature of the inner aluminum tubes. The absorbed energy per unit volume of the aluminum or the aluminum/CFRP compound tubes was higher than that of CFRP tubes. Meanwhile, the absorbed energy per unit mass, for the light-weight design aspect was higher in the aluminum/CFRP compound tubes than in the aluminum tubes or the CFRP tubes. The energy absorption turned out to be higher in circular tubes than in square tubes. Beside the collapse modes and the energy absorption characteristics were influenced by the orientation angle, and the compound tubes took the most effective energy absorption when the fiber orientation angle of CFRP was 90 degrees.

• 한국정밀공학회지
• /
• 제28권12호
• /
• pp.1353-1358
• /
• 2011

LAT(Laser Assisted Turning) is a method that applies a machining process after softening a workpiece in which a preheating process is locally applied to its machining section using laser heat source. LAT shows several advantages, such as high productivity, reduction of manufacturing cost, high quality. Analysis of temperature distribution after preheating for LAT is very difficult due to its very small heat input area and large energy and its movement. Also, the LAT for a square bar is more difficult because the shape of a laser heat source can be changed according to the rotation of the workpiece. In this study, thermal analysis for LAT of square bar was performed using laser heat source projection method. And, the analysis results were compared with the results of the prior study of numerical calculation method. It is thus shown that the proposed method is efficient for the thermal analysis of a shaped bar.

• 한국축산식품학회지
• /
• 제39권1호
• /
• pp.114-120
• /
• 2019

Response surface methodology (RSM) is a useful set of statistical techniques for modeling and optimizing responses in research studies of food science. As a design for a response surface experiment, a central composite design (CCD) with multiple runs at the center point is frequently used. However, sometimes there exist situations where some among the responses at the center point are outliers and these outliers are overlooked. Since the responses from center runs are those from the same experimental conditions, there should be no outliers at the center point. Outliers at the center point ruin statistical analysis. Thus, the responses at the center point need to be looked at, and if outliers are observed, they have to be examined. If the reasons for the outliers are not errors in measuring or typing, such outliers need to be deleted. If the outliers are due to such errors, they have to be corrected. Through a re-analysis of a dataset published in the Korean Journal for Food Science of Animal Resources, we have shown that outlier elimination resulted in the increase of the maximum possible R-square that the modeling of the data can obtain, which enables us to improve the quality of response surface analysis.

• Wind and Structures
• /
• 제29권2호
• /
• pp.139-147
• /
• 2019

One of the most important factors in tall buildings design in urban spaces is wind. The present study aims to investigate the aerodynamic behavior in the square and triangular footprint forms through aerodynamic modifications including rounded corners, chamfered corners and recessed corners in order to reduce the length of tall buildings wake region. The method used was similar to wind tunnel numerical simulation conducted on 16 building models through Autodesk Flow Design 2014 software. The findings revealed that in order to design tall 50 story buildings with a height of about 150 meters, the model in triangular footprint with aerodynamic modification of chamfered corner facing wind direction came out to have the best aerodynamic behavior comparing the other models. In comparison to the related reference model (i.e., the triangular footprint with sharp corners and no aerodynamic modification), it could reduce the length of the wake region about 50% in general. Also, the model with square footprint and aerodynamic modification of chamfered corner with the corner facing the wind could present favorable aerodynamic behavior comparing the other models of the same cluster. In comparison to the related reference model (i.e., the square footprint with sharp corners and no aerodynamic modification), it could decrease the wake region up to 30% lengthwise.

• Steel and Composite Structures
• /
• 제48권5호
• /
• pp.485-498
• /
• 2023

The need for carbon neutrality in the world strives the construction industry to reduce the use of construction materials. Aiming to this, recycled aggregate concrete (RAC) could be used as it reduces the carbon dioxide emissions. Currently, RAC is mainly used in non-structural members of civil constructions, seldom used in structural members. To broaden its structural use, a new type of composite column, i.e., the square and rectangular RAC filled FRP tubes (CFFTs), has been concerned in this study. The investigation on their axial compressive behavior through physical test and numerical analysis demonstrated that the load-carrying capacity of such column is reduced with the increase of replacement ratio of recycled aggregate and aspect ratio of section but can be improved by the increase of FRP confining stiffness and corner radius, said capacity can be equivalent to their steel reinforced concrete counterparts. At failure, the hoop strain at corner of tube is unexpectedly smaller than that at flat side of the tube although the FRP tube ruptured at its corner first, revealing a premature failure. Besides, a design-oriented stress-strain model of concrete and an analysis-oriented finite element model are proposed to predict the load-strain response of square and rectangular CFFT columns, which facilitates the engineering use of RAC in load-carrying structural members.