• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.9-14
• /
• 1993

Weathering of wood in a region of acid rain was performed by the test which thin veneers of Sitka spruce were exposed to outdoor weathering for a total of 18 weeks, with a daily soaking for 30 minutes in acidified water in the pH range 2~5.6. The weathering measured by weight loss and loss in maximum failure load in tension was accelerated by the increase in the acidity of acidified water and in the period of outdoor exposure. It was also shown that the weathering was accelerated even with low acidic conditions in the case of long exposure period, although the weathering was rapidly accelerated with high acidic conditions. When compared the degree of weight loss with that of loss in failure load by weathering, the latter was much greater. From the results of this research, it could be concluded that at pH 4.0 or below of precipitation, the acceleration of weathering of exterior wood would become serious problems, which would be caused deterioration in performance of exterior wood.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.145-150
• /
• 2007

This study was conducted to elucidate the mid-growth of Norway spruce at the age of 27 and select the superior provenances in Korea. Growth performance of twenty-four provenances from Germany and Rumania were investigated in four plantations. Significant differences were found in growth (height, DBH, volume) with plantations. Maximum growth were detected on plantation Chuncheon which located in most northern area, and minimum growth were detected on plantation Wanju located in most southern area. The rank of height in provenances has fluctuated, but superior/inferior groups have been almost fixed. 840-23, 840-10, 840-19 in Germany, G1-64-57, G1-64-54 in Rumania proved excellent provenances. Height in early stage positively correlated with that in late stage. The growth was positively correlated with latitude and altitude of plantations, but negatively correlated with temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.52-59
• /
• 2001

The fixation characteristics of CCA and CCFZ in Japanese red pine, Japanese larch, and ezo spruce sapwood were compared at various temperatures and fixation conditions (drying and nondrying fixation). Fixation was monitored by the rates of reduction of hexavalent chromium to trivalent one, and optimal fixation time was estimated based on the results. The rate of fixation was highly temperature dependent, and the fixation rate of treated wood conditioned under nondrying conditions was much more faster than that under drying conditions, especially when the moisture content of treated wood was below fiber saturation point. Preservative types affected fixation; CCA-Type B had the highest fixation rate, followed by CCA-Type C and then CCFZ. The differences in fixation rates of preservative components were also observed among wood species; Japanese red pine fixed the fastest, followed by Japanese larch and then ezo spruce. Time required to complete fixation according to the fixation temperature could be predicted successfully using the regression equations between the temperatures and fixation time, regardless of conditioning methods, preservative types, and wood species.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.562-568
• /
• 2020

This study investigates the relationship between ultrasonic velocity and density in the direct method, the effect of distance between transducers in the indirect method, and the difference between the direct and indirect methods with transducers placed at a distance of 200 mm in nondestructive ultrasonic testing of spruce lumber. The direct method using 54 kHz ultrasonic transducers was applied to two planes, namely, radial section (LR) and tangential section (LT) of samples. The indirect method measurements were taken using the same transducers. Two velocities were measured at the top and bottom of the LT plane and at the two sides of the LR plane; the two values for each plane were averaged. The relationship between density and ultrasound velocity in the direct method demonstrated a positive correlation between the two variables. The difference between the two planes, LT and LR, was not statistically significant. Moreover, the distance between the transducers in the indirect method affected ultrasound velocity, with the ultrasonic velocity increasing as the distance between the transducers became larger. A transducer distance of 200 mm yielded a close approximation of the direct method results with a ratio of 0.87. Finally, no statistical evidence of a difference between the two planes in the indirect method was found. If the direct method, which requires access to two surfaces, is impractical, the indirect method can be applied.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.42-47
• /
• 2000

This study was designed to investigate the effect of treatment variables on CCA treatment of Japanese red pine (Pinus densiflora), Japanese larch (Larix leptolepis), and ezo spruce (Picea jezoensis) round posts. Variables included were duration of initial vacuum (30, 45, or 60 minutes) and maximum pressure applied (8.5, 10.5, or 14.0 kg/$cm^2$), and maximum pressure was maintained until refusal point was reached. Regardless of wood species, extending the duration of initial vacuum more than 30 minutes did not affect treatability. Increasing pressure did not affect preservative penetration; however, preservative retention was affected by pressure levels, particularly at higher level (14.0 kg/$cm^2$). Preservative penetration depth of Japanese red pine met a minimum requirement specified by Notification of Korean Forestry Administration (No. 1999-8) for hazard class H5 of CCA-treated wood. Penetration of preservative in both Japanese larch and ezo spruce was not deep because of shallow sapwood thickness of these species, so pretreatment such as incising should be considered if these species are treated with preservatives. Although retention in Japanese red pine was not significantly increased even with 14.0 kg/$cm^2$, that of refractory Japanese larch and ezo spruce was significantly increased with the application of 14.0 kg/$cm^2$. Effect of treatment variables on refusal time was unclear; however, it is cleared that the refusal time was shortened with the increase in sapwood thickness.

• The Korean Journal of Ecology
• /
• v.23 no.2
• /
• pp.169-173
• /
• 2000

Seasonal distribution of ectomycorrhizal associations in various types of forest in a boreal forest in Manitoba. Canada was investigated. Alsohe relationship between ectomycorrhizal growth and pine pollen nutrients was examined. In four different forest stands, ectomycorrhizas tended to be lower in the spring than in the summer and fall samples. In addition. a mature jack pine (Pinus banksiana) stand showed higher mycorrhizal activities than a young jack pine stand. Growth of Suillus brevipes hyphae wa ts stimulated by additions of pollen representing mean pollen deposition in Mistik Creek study area after 30 and 70 days of growth with dextrose availability. This result suggests that the peak ectomycorrhizal activity is followed by pollen deposition in the study region and therefore, addition of pine and spruce pollen in early or middle of June in the boreal forest can be an important seasonal nutrient source for ectomycorrhizal growth.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.1-6
• /
• 2005

The anatomical structure of fusiform ray was examined by scanning electron microscopy (and microscopic images were analysed by image analyser) to explain the differences in radial fluid uptake between the extremes in the radial treatment data, i.e. between the selected trees of QCI (Queen Charlotte Islands in Rhondda, South Wales) and SO (South Oregon in Dalby, North-East England) planted in the UK. The ray structure of these two seed origins was examined microscopically and different patterns of ray composition were observed. The most important anatomical features influencing radial permeability were the nature of fusiform ray, and the condition of the resin canals, epithelial cells and intercellular spaces in particular.

• Journal of Plant Biology
• /
• v.4 no.1
• /
• pp.13-15
• /
• 1961

1. This study was made on the flora of Hepaticae in the crater of Mt. Hanla ($33^{\circ}$20' N. Lat. $126^{\circ}$4' E. Long), Isl. Quelpart. 2. the total fo the occurring species of the crater are twelve, out of which the following 6 species are new to the Korean flora. (1) Bazzania tricrenata (Wahlenb.) Trev. (2) Plagiochila satoi Hatt. (3) Scapania ampliata St. (4) Radula boryana (Web.) Nees. (5) Cololejeunea kodamae Kamimura. (6) C. macounii (Spruce) Evans. 3. The hepaticae flora of the crater consists of the following elements: Holarctic element. 4 species (33%), East Asiatic element. 2. species (16%), Korean-Japan element. 5. species (41%), North-Pacific element. 1 species (8%).

• The Korean Journal of Ecology
• /
• v.9 no.4
• /
• pp.201-208
• /
• 1986

The water status of the leaves of several evergreen plants was investigated in order to discuss the geopgraphical distribution of them. Relastionship between relative water content and water potential of the leaves showed linear decrease for evergreen conifers but exponential decrease for Korean box tree (Buxus microphylla var. koreana). On the basis of the leaf water potential, the water status of the conifers during wintering was distinctly divided into three periods; hardening, cold resistance and dehardening, but lacking in those periods for the Korean box tree, where the status continously decreased. In the cold resistance the leaf water potentials were -23 bar for both spruce (Picea jezoensis) and yew (Taxus cuspidata). From these results and threshold temperature at beginning of hardening, distribution of the conifers was explained that in order of the red pine, the Korean white pine, the yew and the spruce the distribution could be extended at higher altitudes and in more northward areas, whereas the distribution of the Korean box tree was restricted to the lowland of temperate zone.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.3
• /
• pp.11-16
• /
• 2003

On nitrobenzene oxidation of aspen, spruce, and knauf wood meals gave rise to vanilline, syrigaldehyde, p-hydroxybenzoaldehyde, vanillic acid, and other minor oxidation products. The phenolic aldehydes (p-hydroxybenzaldehyde, vanilline, and syringaldehyde) are derived from oxidative degradation of the corresponding 4-hydroxyphenylpropane units and their ethers. The lignin content of knauf wood meals was different as the concentration of NaOH solution and cooking temperature. The lignin contents of aspen, spruce, and knauf wood meals were decreased as laccase treatment. The laccase caused C-oxidation, demethylation, cleavage in phenolic groups and C-C cleavage in syrigyl structures.