• Design & Manufacturing
• /
• 제12권2호
• /
• pp.34-39
• /
• 2018

The biggest topics in the automobile industry are light weightening and fuel efficiency improvement. There's a lot of research going on. It is focused on light weight materials. Light weight material is seen as the best way to reduce fuel consumption and to solve the problem of environmental pollution and resource depletion. For the light weight materials, new materials such as aluminum, magnesium, and carbon-hardening materials can be found. Research on the joining techniques of dual materials, improvement of material properties by improving the method of manufacture of existing materials, and studies on ultra-high strength steel sheets are expected to take up the most weight in lightweight materials. As the strength of the ultra-high strength steel sheets increases during forming, it is difficult to obtain dimensional precision due to the increase in elastic restoring force compared to mild or high strength steel sheets. Spring back is known to be affected by a number of factors due to poor plastic molding, and can be divided into the effects of the material spraying and the process. The study on the plasticitic variables were studied as plasticitic factors that can be controlled by a part company. Tensile testing of ultra-high strength materials was conducted to derive properties for plasticitic analysis and to analyze spring back with two factors controlling the height of the bead and blank holding force by adding tensile force and controlling the flow rate.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.467-470
• /
• 2005

There are about 10 motors for tile actuator of the automation system in an auto-mobile recently. The performance of the motor-case is much related to the noise and the vibration of an auto-mobile Multi-Forming process is so much the better than existing deep-drawing or Multi-step forming by press by less cost, installation and staff. But there isn't the specific and general process design, so we aren't good at competition. So in the first step, I want to study about the core design for the multi-forming process. We can access by the elasto-plastic theory and the finite element method, and we use a commercial package of the Deform-2D and, Deform-3D which is based on three-dimensional elasto-plastic finite element, evaluated propriety oi the package. The evaluation of the package propriety was simulated by simple bending example. It was found the elasto-plastic theory was mostly in agreement with the simulation. We proposed that three type of section for the core and analyzed by finite element method (Deform-2D). We can get the best result with the ellipse type core. Then we apply the result of the preceding analysis to the finite element method (Deform-3D). In 3D-finite element analysis, we can get the result of 8/100mm-roundness. This result can help the improvement of the multi-forming process.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.1-6
• /
• 2018

하이드로포밍 기술은 지난 20년간 자동차부품의 적용을 중심으로 비약적인 발전을 해 왔다. 이 기술은 자동차 산업응용분야에 많은 장점을 가지고 있는데 이는 더 나은 구조적 강건성, 부품수 감소에 기인한 비용절감, 재료절약, 무게감소, 낮은 스프링백현상, 개선된 강도, 내구성 향상, 설계 유연성 등이다. 하이드로포밍 부품의 성형성 검토를 위하여 다양한 컴퓨터 시뮬레이션 기술 등이 발달해 왔으며 이를 통해 성형 가능성을 검토하는 것과 동시에 성형을 위하여 벤딩 공정, 프리포밍공정, 다이클로징 공정 등의 효율적인 공정을 수립하여 하이드로포밍 부품들을 설계하고 있다. 이에 본 연구에서는 하이드로포밍 부품 설계 시 고려사항 중 성형량, 부품의 단면길이(하이드로포밍 프레스 용량에 맞는), 최소 곡률(하이드로포밍 압력에 따른 곡률 영향 평가) 등을 제시하고 실제 자동차용 리어 서브-프레임 부품의 단면분석을 실시함으로써 하이드로포밍 성형을 위한 설계 방안을 제시하고자 한다. 아울러 하이드로포밍 공정인자 중 프리벤딩, 축피딩, 유압 압력, 프레스 하중, 마찰 등의 효과를 분석하여 이들 공정이 직접적인 하이드로포밍 성형에 필요인자 인지 등을 고찰하였다.