• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.83-91
• /
• 2014

In this study, we synthesized two different silica monoliths by using sol-gel, solvent exchange, surface modification, ambient pressure drying processes, and surfactant-based templating technique followed by calcination process. All of the prepared two silica monoliths showed crack-free appearance with fairly good transparency, and furthermore were confirmed to have extremely high porosity, specific surface area, and mean pore size below 30 nm. The silica aerogel sample exhibited finer and more homogeneous nano-sized pore structure due to spring back effect caused by surface modification, which resulted in better thermal insulation performance. Based on measured thermal conductivities and theoretical relationship, multi-layered glass window system in which silica monolith prepared in this study was inserted as a middle layer was revealed to have superior thermal insulation performance compared to conventional air-inserted glass window system.

• Korean Journal of Veterinary Service
• /
• v.31 no.2
• /
• pp.219-227
• /
• 2008

Swine ascariasis is one of the major parasitic diseases to cause economic losses. This study was carried out to investigate the prevalence of Ascaris suum from slaughtered pigs and return the result to the farm (Feed - back). A total of 8,121 pigs (315 farms) were examined from January to November in 2007. The prevalence of farms detected with milk-spots was 42.9% (135 / 315 farms), and that of pigs with milk-spots was 7% (565 / 8,121 heads). Among 565 pigs with milk-spots, the pigs with grade 1 and grade 2 were 380 and 185, respectively. The percentage of pigs and farms detected with adult worm were 0.6% (45/8,121) and 7.3% (23/315) respectively. There was no statistical difference in affection rateamong seasons. The rate was 5.0% in spring, 8.8% in summer, 8.2% in autumn and 6.3% in winter. There was no enough difference in pig infection rate based on piggery type. The prevalence of milk-spots in stolic type and in sawdust one were 15% and 18.5%, respectively.

• YAKHAK HOEJI
• /
• v.51 no.6
• /
• pp.415-423
• /
• 2007

This study was to evaluate the genotoxic effects of airborne particulate matters using single cell gell elec trophoresis (comet assay) in A549 human lung carcinoma cells. The total suspended particulate (TSP) was collected on back-up filter in Chuncheon, Kangwon Do, South Korea from April, 2003 to February, 2005. The concentrations of TSP, B(a)p and most of heavy metals seemed to be higher in spring and winter, and lower in summer. And they showed higher concentration in the commercial areas and the residential area having more traffics than in the rural area. It was found that A549 cells interacting with the organic extract of TSP showed more DNA single-strand breaks compare to untreated cells. The genotoxicity of the organic extract of TSP was increased with the pre-treatment of S-9 mixture during the culture or with the treatment of endonuclease after cell lysis. The DNA damage by the organic extract of TSP was higher in winter and the commercial area than in summer and the rural area. This study suggests that TSP, heavy metals and B(a)P analyzed showed significant variation depend on the seasons and the areas which are correlated with the DNA damage evaluated by Comet assay, indicating that genotoxic biomarker is useful for toxicological evaluation of air quality.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.307-313
• /
• 2002

Urban style row-rise houses for rent have been supplied to the center of city from the 1950's first half The amount of stock is about 450,000 houses and occupies about 40％ in the private rented house. As for the structure, the 60％ of them is wooden-structure and the rest is non-wooden. Stocks of 57.5％ of the wooden-structure and 86％ of the non-wooden were built after 1981 years. It was 1981 years that the new earthquake-resistant standard was carried out, the improvement of stocks built before 1981 is necessary because those don't satisfy the present standard. To investigate the renovation possibility of urban style row-rise houses for rent, actual situation of two-story apartment at 2,4, and 5 Chome Taito-Ku in Tokyo was surveyed from July to November 2001. The number of building analyzed is 227 ridges among 234 ridges of the surveyed two-story building. 90％ of building analyzed is wooden structure. 1) The site of 88％ building surveyed is close to a road less than 4m width. It becomes the existing non-conformed building in the building construction act. It is impossible to make a renovation such as rebuilding, extension and remodeling because it requires the set back when renovating this type of non-conformed building, 2) The building built before 1981 is almost wooden-structure, and occupies 37％ of the building surveyed, and doesn't satisfy the present earthquake-resistant standard. An improvement of them is needed because the decrepitude of building proceeds. 3) 50％ of openings and 40％ of windows of the building surveyed doesn't use noncombustible materials. Though it becomes the existing non-conformed building, it can satisfy the present standard by replacing openings with noncombustible materials.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.152-160
• /
• 2001

This study is conducted to evaluate the effects of containerized landscape tree production methods on post-transplant stress. Two types of container such as plastic pot(pot), fabric growing bag(bag) were adopted to restrict tree roots. Each types of containers was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plants species (Magnolia denudata, Albizzia julibrissin) were implanted in the 7 sub-types of container. After one or two growing season in the container, each types of container trees was transplanted. Half of the trees were transplanted in the mild spring season, and another half of trees were transplanted in the improper summer season. The data were collected on the crown wilting ratio and trunk die-back ratio. The result of the analysis based on these data were as follows; 1) The container production methods were lower than the traditional production methods by 3 times in the average wilting ratio of summer season's transplanting point. 2) Post-transplant stress was more successfully mitigated, in case the "pot" type as was the "bag" types of container. 3) The effective and economic way of mitigating post-transplant stress by container production methods was selecting container plants of vigorous and deep root systems. 4) The "pot" type of container was to restrict tree roots more successfully, But, winter chilling and low temperature attacked the "pot" type tree's twigs and suckers. These results indicated that "pot" grown container plants should managed carefully during the winter after transplanting. Based upon the results of this study, a subsequent research on the development of container material, growth type of the container trees, and other maintaining method will be required.es, and other maintaining method will be required.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.177-183
• /
• 2015

Incremental sheet metal forming is a manufacturing process to produce thin parts using sheet metals by a series of small incremental deformation. The process rarely needs dedicated dies and molds, thus, preparation time for the process is relatively short as to be compared to conventional metal forming. Spring back in sheet metal working is very common, which causes critical errors in dimensions. Incremental sheet metal forming is not fully investigated yet. Hence, incremental sheet metal forming frequently produces inaccurate parts. This paper proposes a method to minimize dimensional errors to improve shape accuracy of products manufactured by incremental forming. This study conducts experiments using an exclusive incremental forming machine and the material for these experiments are sheets of aluminum AL1015. This research defines a process parameter and selects a few factors for the experiments. The parameters employed in this paper are tool feed rate, tool diameter, step depth, material thickness, forming method, dies applied, and tool path method. In addition, their levels for each factor are determined. The plan of the experiments is designed using orthogonal array $L_8$ ($2^7$) which requires minimum number of experiments. Based on the measurements, dimensional errors are collected both on the tool contacted surfaces and on the non-contacted surfaces. The distances between the formed surfaces and the CAD models are scanned and recorded using a commercial software product. These collected data are statistically analyzed and ANOVAs (analysis of variances) are drawn up. From the ANOVAs, this paper concludes that the process parameters of tool diameter, forming depth, and forming method are the significant factors to reduce the errors on the tool contacted surface. On the other hand, the experimental factors of forming method and dies applied are the significant factors on the non-contacted surface. However, the negative forming method always produces better accuracy than the positive forming method.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.662-667
• /
• 2021

Vibrotactile feedback is a major function of the latest touch displays, which greatly improves the user's operability and immersion when interacting with the interface on the screen. In this study, we propose a vibrotactile actuator suitable for mounting on the back side of a mid- to large-sized display because it can generate a strong vibration output by applying an electrostatic force-based mechanism and can be manufactured in a thin flat panel type. The proposed actuator was developed in a structure capable of amplifying the vibration force by alternating up and down with electrostatic force by the upper and lower electrodes that are spaced apart from the electrically grounded mass suspended from a radial leaf spring. As a result of the performance evaluation, the developed bar-type module with two built-in actuators showed excellent vibration output of up to 3.3 g at 170 Hz, confirming the possibility of providing haptic feedback in medium and large touch displays.

• Transactions of Materials Processing
• /
• v.33 no.2
• /
• pp.103-111
• /
• 2024

With the increasing global interest in carbon neutrality, the automotive industry is also transitioning to the production of eco-friendly cars, specifically electric vehicles. In order to achieve comparable driving distances to internal combustion engine vehicles, the application of high-capacity battery packs has led to an increase in vehicle weight. To achieve light-weighting and durability requirements of automotive components simultaneously, there is a demand for research on the application of Ultra-High Strength Steel (UHSS). However, when manufacturing chassis components using UHSS, there are challenges related to fracture defects due to lower elongation compared to regular steel sheets, as well as spring-back issues caused by high tensile strength. In this study, a simulated specimen that is not affected by the property changes of four materials was designed to improve formability of the rear cross member, which is the most challenging automotive chassis component. The influence and correlation of material-specific variables were analyzed through finite element analysis (FEA) for each material with tensile strength of 440, 590, 780, and 980 MPa grades, resulting in the development of a predictive equation. To validate the equation, the simulated specimens of 980 MPa grade were produced from the test molds. Then the reliability of the FEA and predictive equation was verified with measured specimen data using a 3D scanner. The results of this study can be proposed to improve the formability of UHSS chassis components in future researches.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.349-359
• /
• 2006

Objective: Nickel-titanium alloy wire possesses excellent spring-back properties, shape memory and super-elasticity. In order to adapt this wire to clinical use, it is necessary to bend as well as to control its super-elastic force. The purpose of this study is to evaluate the effects of heat treatment on the load-deflection properties and transitional temperature range (TTR) of nickel-titanium wires. Methods: Nickel-titanium wires of different diameters ($0.016"\;{\times}\;0.022"$, $0.018"\;{\times}\;0.025"$ and $0.0215"\;{\times}\;0.028"$) were used. The samples were divided into 4 groups as follows: group 4, posterior segment of archwire (24 mm) without heat treatment; group 2, posterior segment of archwire (24 mm) with heat treatment only; group 3, anterior segment with bending and heat treatment; group 4, anterior segment with bending and 1 sec over heat treatment. Three point bending test was used to evaluate the change in load-deflection curve and obtained DSC (different scanning calorimetry) to check changes in $A_f$ temperature. Results: In the three point bending test, nickel-titanium wires with heat treatment only had higher load-deflection curve and loading and unloading plateau than nickel-titanium wires without heat treatment. Nickel-titanium wires with heat treatment had lower Af temperature than nickel-titanium wires without heat treatment. Nickel-titanium wires with heat treatment and bending had higher load-deflection curve than nickel- titanium wires with heat treatment and nickel-titanium wires without heat treatment. Nickel-titanium with heat treatment of over 1 sec and bending had the highest load-deflection curve. Nickel-titanium wires with heat treatment and bending had lower Af temperature, Nickel-titanium wires with heat treatment of over Af sec and bending had the lowest Af temperature. Conclusion: From the results of this study, it can be stated that heat treatment for bending of Nickel-titanium wires does not deprive the superelastic property but can cause increased force magnitude due to a higher load-deflection curve.

• Journal of Animal Environmental Science
• /
• v.17 no.3
• /
• pp.171-180
• /
• 2011

The researchers have tried to reduce ruminal methane gas ($CH_4$) and to convert it into beneficial nutrient for several decades. This study was conducted to screen the methane-reducing vegetables among lettuce, hot pepper, spring onion, onion, turmeric, sesame leaf, garlic, radish sprout, leek and ginger nutritiously on the in vitro ruminal fermentation. The heat-treated vegetables at the 10% of substrate (timothy) were used to reduce methane production on the in vitro anaerobic experiment of 0, 6, 12, 24 and 48 h incubation time. Total gas production, pH, ammonia, $H_2$, $CO_2$, $CH_4$, and volatile fatty acid (VFA) were measured as indicators of in vitro fermentation product containing methane gas. All treatments except garlic showed a tendency to increase in total gas production. The result of ammonia showed that garlic and hot pepper affected rumen bacteria concerned protein metabolism and that lettuce and spring onion increased ammonia production. Garlic decreased $CH_4$ production in inverse proportion to $H_2$. Lettuce, spring onion, onion, garlic, radish sprout, leek and ginger increased propionate of VFA. Garlic balanced the ruminal fermentation in the pH, $H_2$, $CH_4$, acetate and propionate. This results showed that methane production at in vitro study was inhibited by heat-treated garlic supplementation. In conclusion, this study suggests that ruminal fermentation covering methane production might be controled by proper vegetables.