• Bulletin of the Society of Naval Architects of Korea
• /
• v.20 no.1
• /
• pp.47-58
• /
• 1983

A study is made, in the framework of linear potential theory, to investigate the hydrodynamic characteristics of two-dimensional wave-energy absorbers as like the Salter's duck and an oscillating cam with Lewis-form section, which undergo uncoupled heaving and rolling motions in an incident linear gravity wave in deep water. Wave energy is supposed to be extracted by a linearly damped generator with an spring. Some well-known formulae in ship hydrodynamics such as Haskind-Newman relation and Bessho-Newman relation are utilized in forms of Kochin functions to derived expressions for efficiency, breaking effect and drift force of the absorber. Maximum ideal efficiency of 100% can be arrived at an prescribed tuning frequency. Coupling effect is also examined to assess the detrimental effect of sway on efficiency. From numerical calculations for both types of two-dimensional devices it may be concluded that a wave-energy absorber functions at the same time as a wave breaker and that the drift force acting on the device becomes smaller when it absorbs wave energy than as it oscillates freely. Finally the study is extended to an infinite array system, equivalent to a body in a canal, to show that all incident wave energy can be absorbed regardless of the absorber's size, only if the optimum space and the optimum condition of control are realized.

• Korean Journal of Acupuncture
• /
• v.37 no.4
• /
• pp.276-283
• /
• 2020

Objectives : In each section of Huangdineijing, we reviewed how the actual clinical application of Five-Transport-points was reflected and looked at the pattern of the application at the time. Methods : The contents related to Five-Transport-points in Huangdineijing were collected from each part, and analyzed. Results : There was a great difference in the number and contents of the clinical application of each Five-Transport-point for each 12 meridian, and only 28.3% of all Five-Transport-points had been related to clinical treatment. In addition, in specific applications, spring point, stream point, and sea point were used more often than well point, and Five-Transport-points between the same meridian or different meridians were used in combination as needed. Conclusions : Five-Transport-points described in Huangdineijing are intended to be operated within the overall framework structurally or functionally with a certain principle, but as a result of comprehensive analysis of specific examples of clinical application, there was a difference in the application between Five-Transport-points. This indicates that at the time of the establishment of Huangdineijing, which was the early stage of the development of Traditional East Asian Medicine, a variety of miscellaneous acupuncture methodologies were used in addition to those based on five elements principle.

• Journal of Information Technology Services
• /
• v.20 no.3
• /
• pp.1-12
• /
• 2021

Reactor Coolant Pump (RCP) is core part of nuclear power plant to provide the forced circulation of reactor coolant for the removal of core heat. Properly monitoring vibration of RCP is a key activity of a successful predictive maintenance and can lead to a decrease in failure, optimization of machine performance, and a reduction of repair and maintenance costs. Here, we developed real-time RCP Vibration Analysis System (VAS) that web based platform using NoSQL DB (Mongo DB) to handle vibration data of RCP. In this paper, we explain how to implement digital signal process of vibration data from time domain to frequency domain using Fast Fourier transform and how to design NoSQL DB structure, how to implement web service using Java spring framework, JavaScript, High-Chart. We have implement various plot according to standard of the American Society of Mechanical Engineers (ASME) and it can show on web browser based on HTML 5. This data analysis platform shows a upgraded method to real-time analyze vibration data and easily uses without specialist. Furthermore to get better precision we have plan apply to additional machine learning technology.

• Geomechanics and Engineering
• /
• v.33 no.4
• /
• pp.381-391
• /
• 2023

The aim of this work is to analyze and predict the wave propagation behavior of the carbon nanotube reinforced composites (CNTRC) beams within the framework of various higher order shear deformation beam theory. Using the Euler-Lagrange principle, the wave equations for CNTRC beams are derived, where the determining factor is to make the determinant equal to zero. Based on the eigenvalue method, the relationship between wave number and circular frequency is obtained. Furthermore, the phase and group velocities during wave propagation are obtained as a function of wave number, and the material properties of CNTRC beams are estimated by the mixture rule. In this paper, various higher order shear beam theory including Euler beam theory, Timoshenko beam theory and other beam theories are mainly adopted to analyze the wave propagation problem of the CNTRC beams, and by this way, we conduct a comparative analysis to verify the correctness of this paper. The mathematical model provided in this paper is verified numerically by comparing it with some existing results. We further investigate the effects of different enhancement modes of CNTs, volume fraction of CNTs, spring factor and other aspects on the wave propagation behaviors of the CNTRC beams.

• Geomechanics and Engineering
• /
• v.37 no.2
• /
• pp.167-178
• /
• 2024

The natural frequency shift under cyclic environmental loads is a key issue in the design of monopile-based offshore wind power turbines because of their dynamic sensitivity. Existing evidence reveals that the natural frequency shift of the turbine system in sand is related to the varying foundation stiffness, which is caused by soil deformation around the monopile under cyclic loads. Therefore, it is an urgent need to investigate the effect of soil deformation on the system frequency. In the present paper, three generalized geometric models that can describe soil deformation under two-way cyclic loads are proposed. On this basis, the cycling-induced changes in soil parameters around the monopile are quantified. A theoretical approach considering three-spring foundation stiffness is employed to calculate the natural frequency during cycling. Further, a parametric study is conducted to describe and evaluate the frequency shift characteristics of the system under different conditions of sand relative density, pile slenderness ratio and pile-soil relative stiffness. The results indicate that the frequency shift trends are mainly affected by the pile-soil relative stiffness. Following the relevant conclusions, a design optimization is proposed to avoid resonance of the monopile-based wind turbines during their service life.

• Journal of the Korean earth science society
• /
• v.32 no.7
• /
• pp.750-760
• /
• 2011

In this study, the reproducibility of the simulated current climate by using two regional climate models, such as Seoul National University Regional Climate Model (SNURCM) and Weather Resuearch and Forecasting (WRF), is evaluated in advance to produce the standard regional climate scenario of future climate. Within the evaluation framework of a COordinated Regional climate Downscaling EXperiment (CORDEX), 28-year-long (1978-2005) regional climate simulation was conducted by using the Hadley Centre Global Environmental Model (HadGEM2-AO) global simulation data of the National Institute of Meteorological Research (NIMR) as a lateral boundary forcing. The simulated annual surface temperatures were in good agreement with the observation; the spatial correlation coefficients between each model and observation were over 0.98. The cold bias, however, were shown over the northern boundary in the both simulated results. In evaluation of the simulated precipitation, the skill was reasonable and good. The spatial correlation coefficients for the precipitation over the land area were 0.85 and 0.79 in SNURCM and WRF, respectively. It is noted that two regional climate models (RCMs) have different characteristics for the distribution of precipitation over equatorial and midlatitude areas. SNURCM shows better distribution of the simulated precipitation associated with the East Asia summer monsoon in the mid-latitude areas, but WRF shows better in the equatorial areas in comparison to each other. The simulated precipitation is overestimated in summer season (JJA) rather than in spring season (MAM), whereas the spatial distribution of the precipitation in spring season corresponds to the observation better than in summer season. Also the RCMs were capable of reproducing the annual variability of the maximum amount and its timing in July, in which the skills over the inland area were in better agreement with the observation than over the maritime area. The simulated regional climates, however, have the limitation to represent the number of days for extremely hot temperature and heavy rainfall over South Korea.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.3
• /
• pp.16-28
• /
• 2016

Advancing geo-spatial web technologies and their applications require compatible and interoperable heterogeneous browsers and platforms. Reduction of common or supporting components for web-based system development is also necessary. If properly understood and applied, OGC-based standards can be utilized as effective solutions for these problems. Thus, OGC standards are central to the design and development of web-based geo-spatial systems, and are particularly applicable to web services, which contain data processing modules. However, the application for OGC WPS 2.0 is at an early stage as compared with other OGC standards; thus, this study describes a test implementation of a web-based geo-spatial processing system with OGC WPS 2.0 focused on asynchronous processing functionality. While a binary thresholding algorithm was tested in this system, further experiments with other processing modules can be performed on requests for many types of processing from multiple users. The client system of the implemented product was based on open sources such as jQuery and OpenLayers, and server-side running on Spring framework also used various types of open sources such as ZOO project, and GeoServer. The results of geo-spatial image processing by this system implies further applicability and extensibility of OGC WPS 2.0 on user interfaces for practical applications.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.3
• /
• pp.321-339
• /
• 2014

This paper concerns the development of a knowledge-based tunnel design system within the framework of artifical neural networks(ANNs). The system is aimed at expediting a routine tunnel design works such as computation of segment lining body forces and stability analysis of selected cross section. A number of sub-modules for computation of segment lining body forces and stability analysis were developed and implemented to the system. It is shown that the ANNs trained with the results of 3D numerical analyses can be generalized with a reasonable accuracy, and that the ANN based tunnel design concept is a robust tool for tunnel design optimization. The details of the system architecture and the ANNs development are discussed in this paper.

• Journal of Korea Game Society
• /
• v.18 no.2
• /
• pp.27-36
• /
• 2018

In this paper, we propose a win-win network operating platform for mobile games. The characteristics of the service structure suggested is to form a marketing network that can influence the mobile game market by linking with the mobile game industry, and the excellent game content of the game developer in the industrial complex may not disappear. We also would like to propose a network operating platform that would help it enter the market area steadily. The proposed platform technology is used to distribute rapidly through a win-win network between game companies and publishers. When new games are commercialized, they can support continuous target marketing through various data indicators and analytics by the developed platform. In particular, G-Cross marketing strategy is considered to be a low-cost, high-efficiency marketing method in that it can provide users with information about new games by utilizing the given game infrastructure and utilize the user group possessed by each game company.

• The Journal of Bigdata
• /
• v.1 no.2
• /
• pp.9-19
• /
• 2016

Since ICT convergence became a major issue, German government has carried forward a policy 'Industry 4.0' that triggered ICT convergence with manufacturing. Now this trend gets into our stride. From this facts, we can expect great leap up to quality perfection in low cost. Recently Korean government also enforces policy with 'Manufacturing 3.0' for upgrading Korean manufacturing industry with being accelerated by many related technologies. We, in the paper, developed a custom-made operational big data analysis platform for the implementation of operational intelligence to improve industry capability. Our platform is designed based on spring framework and web. In addition, HDFS and spark architectures helps our system analyze massive data on the field with streamed data processed by process mining algorithm. Extracted knowledge from data will support enhancement of manufacturing performance.