• Wind and Structures
• /
• 제25권2호
• /
• pp.131-156
• /
• 2017

This paper deals with the dynamic stability of embedded functionally graded (FG)-carbon nanotubes (CNTs)-reinforced micro cylindrical shells. The structure is subjected to harmonic non-uniform temperature distribution and 2D magnetic field. The CNT reinforcement is either uniformly distributed or FG along the thickness direction where the effective properties of nano-composite structure are estimated through Mixture low. The viscoelastic properties of structure are captured based on the Kelvin-Voigt theory. The surrounding viscoelastic medium is considered nonhomogeneous with the spring, orthotropic shear and damper constants. The material properties of cylindrical shell and the viscoelastic medium constants are assumed temperature-dependent. The first order shear deformation theory (FSDT) or Mindlin theory in conjunction with Hamilton's principle is utilized for deriving the motion equations where the size effects are considered based on Eringen's nonlocal theory. Based on differential quadrature (DQ) and Bolotin methods, the dynamic instability region (DIR) of structure is obtained for different boundary conditions. The effects of different parameters such as volume percent and distribution type of CNTs, mode number, viscoelastic medium type, temperature, boundary conditions, magnetic field, nonlocal parameter and structural damping constant are shown on the DIR of system. Numerical results indicate that the FGX distribution of CNTs is better than other considered cases. In addition, considering structural damping of system reduces the resonance frequency.

• 대기
• /
• 제20권3호
• /
• pp.273-286
• /
• 2010

The northeast part of China(hereafter Manchuria) is one of Asian dust source regions along with Gobi, Inner Mongolia and Loess Plateau. In this study, a geographical survey over the area was carried out to determine its soil characteristics in June 2009. It revealed that some parts of the area, especially near Keerchin desert, consist of alkali clay soil mixed up with sand. Manchuria, where is a vast cornfield, can be a potential source region of Asian dust from fall to following spring after harvesting. The frequency of Asian dust over the region from 1996 to 2009 was examined using 3-hourly GTS SYNOP data and it showed that the occurrence of Asian dust over the region is high in the springtime. It was also revealed that snow cover is the key parameter affecting on the frequency through the analysis of NCEP reanalysis data. To scrutinize the path and structure of Asian dust from Manchuria, the event on 3~4 April 2008 and 25 January 2010 were intensively investigated with regard to features of synoptic weather patterns, satellite imagery, airstream, naked eye-observations, concentrations of PM10, 2.5 and 1.0. For this case, the Asian dust from the area reached to Korea less than a day. However, the duration time of the dust in Korea was short (< 7 hours). The average of hourly PM10 reached up to $340{\mu}g/m^{3}$ at Baengnyeondo during the period. The high PM2.5 and PM1.0 concentrations were also observed at several sites in Korea, indicating that air pollutants could be transported along with the dust.

• 한국해양학회지
• /
• 제26권2호
• /
• pp.155-168
• /
• 1991

만경, 동진강 하구 표영 생태계에서 일차생산자의 군집 구조와 분포 양상 그리고 이들과 무생물 환경과의 관계를 파악하기 위하여 1989년 10월부터 1990년 7월까지 5회 에 걸쳐 시료를 채집, 분석 하였다. 그 결과 식물플랑크톤은 159종이 동정되었으며 규 조류가 70.4%로 가장 우세하였다. 생태특성으로는 연안종이 52%로 가장 우세하였고 담 수종 18%, 외상양 12% 순으로 나타나 담수와 외양의 해수에 의해 영향을 받는 하구역 의 특성이 뚜렷하다. 식물플랑크톤의 종 조성은 염분 변화에 좌우되는 것으로 사료된 다. 연구해역에서 일차생산자의 현존량은 시, 공간에 따라 크게 변하는데 투명도와 밀 접한 관계가 것으로 보이며 서해의 다른 해역에 비해 높은 수준이다. 종 다양성 지수 역시, 시, 공간적으로 변화가 컸으며 10월에 최대, 5월에 최소치를 보였다. 연구해역 은 가을과 겨울에는 외양수에 의한 영향으로, 봄과 여름에는 강으로부터 유입되는 담 수에 의한 영향으로 크게 두 개의 해역으로 구분되어 진다.

• 대한조선학회논문집
• /
• 제34권4호
• /
• pp.91-98
• /
• 1997

대부분의 동적계에는 기진력과 계 특성치들에 다양한 불확실성이 존재한다. 본 논문에서는, 기진력과 계 특성치에 불확실성이 존재하는 선형 동적계에 대한 응답 및 신뢰성을 해석하는 하나의 과정을 제안하였다. 계 특성치와 응답은 섭동법에 의하여 모델링되고, 확률 이론과 진동 이론에 의하여 응답 해석이 정식화된다. 또한 응답의 평균을 구하기 위하여 확률유한요소법이 사용되었다. 파괴확률을 구하는 방법으로는 적분방정식법에 의한 최초통과확률 해석이 사용되었다. 적분방정식법은 통과율과 최초통과 확률밀도의 항들에 의해 최초통과확률로 귀결된다. 본 연구에서는 기진력, 계 특성치 그리고 응답은 모두 Gaussian 확률 특성을 가정하였다. 적용예로써, 정상 백색잡음 기진력을 받고 확률 특성을 갖는 질량 및 스프링 상수들로 이루어진 1자유도계에 대하여 과도응답 상태에서의 파괴확률을 계산하였으며, 그 결과를 수치 시뮬레이션 결과와 비교하였다.

• 한국자기학회지
• /
• 제6권2호
• /
• pp.80-85
• /
• 1996

$Nd_{2}Fe_{14}B/Fe_{3}B$ 복합자성상을 근간으로 한 급냉제조된 합금을 외부 자장중에서 열처리를 함으로써 자기특성이 월등하게 좋아짐을 확인하였다. $Nd_{4}Fe_{73.5}Co_{3}(Hf_{1-x}-Ga_{x})B_{18.5}$ 조성 합금을 1~5 kOe 자장중에서 열처리함으로써 연자성의 기지상$(Fe_{3}B)$ 및 강자성상$(Nd_{2}Fe_{14}B)$의 결정입도가 20% 감소하였고, 그 결과 잔류자속밀도 $(B_{r})$ 및 최대자기에너지적, ${(B.H)}_{max}$가 30% 이상 증가하였다. 이러한 증가는 입도의 감소 뿐만 아니라 미세입도의 고른 분포에도 기인한 것으로 판단되었다. 보자력의 극대점은 잔류자속밀도와는 달리 특정결정입도에서 발생하며, 이러한 기구를 교환상호작용변수 와 연관하여 설명한다. $Nd_{4}Fe_{73.5}Co_{3}Hf_{0.5}Ga_{0.5}B_{18.5}$ 합금을 자장중 열처리한 결과 ${(B.H)}_{max}=15.8$ MGOe의 고에너지적을 얻을 수 있음을 확인하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제12권3호
• /
• pp.52-59
• /
• 2015

An electro hydraulic poppet valve (EHPV) and a variable orifice poppet are assembled in a single block, which is referred to as a RHINO but is also generally called a pilot-operated flow control valve. In this study, we analyzed the structure and the operating principle for a RHINO applied in a 21-ton electric excavator system. The RHINO was experimentally tested to measure the dynamic responses and the pressure energy loss. In this test, we investigated the variation in the conductance coefficient according to the increase in the supply pressure under a constant current and a variation in the flow rate according to the increase in the current. Then, the geometrical shapes and the spring stiffness of the RHINO were considered to develop an analysis model. The characteristics (current-force and hysteresis) for the solenoid based on the experimental data were reflected in the analysis model that was developed, and the reliability of the analysis model was also verified by comparing the experimental and analytical results. The developed model is thus considered to be reliable for use in a wide range of applications, including optimum design, sensitivity analysis, parameter tuning, etc.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.177-183
• /
• 2015

Incremental sheet metal forming is a manufacturing process to produce thin parts using sheet metals by a series of small incremental deformation. The process rarely needs dedicated dies and molds, thus, preparation time for the process is relatively short as to be compared to conventional metal forming. Spring back in sheet metal working is very common, which causes critical errors in dimensions. Incremental sheet metal forming is not fully investigated yet. Hence, incremental sheet metal forming frequently produces inaccurate parts. This paper proposes a method to minimize dimensional errors to improve shape accuracy of products manufactured by incremental forming. This study conducts experiments using an exclusive incremental forming machine and the material for these experiments are sheets of aluminum AL1015. This research defines a process parameter and selects a few factors for the experiments. The parameters employed in this paper are tool feed rate, tool diameter, step depth, material thickness, forming method, dies applied, and tool path method. In addition, their levels for each factor are determined. The plan of the experiments is designed using orthogonal array $L_8$ ($2^7$) which requires minimum number of experiments. Based on the measurements, dimensional errors are collected both on the tool contacted surfaces and on the non-contacted surfaces. The distances between the formed surfaces and the CAD models are scanned and recorded using a commercial software product. These collected data are statistically analyzed and ANOVAs (analysis of variances) are drawn up. From the ANOVAs, this paper concludes that the process parameters of tool diameter, forming depth, and forming method are the significant factors to reduce the errors on the tool contacted surface. On the other hand, the experimental factors of forming method and dies applied are the significant factors on the non-contacted surface. However, the negative forming method always produces better accuracy than the positive forming method.

• Computers and Concrete
• /
• 제24권1호
• /
• pp.73-83
• /
• 2019

Concrete reinforced with fiber reinforced polymer (FRP) bars (FRP-RC) has attracted a significant amount of research attention in the last three decades. A limited number of studies, however, have investigated the effect of bond slip on the performance of FRP-RC columns under eccentric loading. Based on previous experimental study, a finite-element model of eccentrically loaded FRP-RC columns was established in this study. The bondslip behavior was modeled by inserting spring elements between FRP bars and concrete. The improved Bertero-Popov-Eligehausen (BPE) bond slip model with the results of existing FRP-RC pullout tests was introduced. The effect of bond slip on the entire compression-bending process of FRP-RC columns was investigated parametrically. The results show that the initial stiffness of bond slip is the most sensitive parameter affecting the compression-bending performance of columns. The peak bond stress and the corresponding peak slip produce a small effect on the maximum loading capacity of columns. The bondslip softening has little effect on the compression-bending performance of columns. The sectional analysis revealed that, as the load eccentricity and the FRP bar diameter increase, the reducing effect of bond slip on the flexural capacity becomes more obvious. With regard to bond slip, the axial-force-bending-moment (P-M) interaction diagrams of columns with different FRP bar diameters show consistent trends. It can be concluded from this study that for columns reinforced with large diameter FRP bars, the flexural capacity of columns at low axial load levels will be seriously overestimated if the bond slip is not considered.

• Journal of Forest and Environmental Science
• /
• 제38권2호
• /
• pp.102-109
• /
• 2022

This study was conducted to test the significant difference of fertility variation among families and to select superior families for acorn production in the breeding seedling seed orchards (BSSOs) of Quercus acuta and Quercus glauca. The seed orchards were located in Jeju island and established by seedlings raised from selected parents for genetic testing in 2006. In the spring of 2021, the numbers of female and male flower were counted from 5 to 10 individuals per family in the BSSOs. To test statistical significance of which parameter is not satisfied through the normality test, we used a nonparametric analysis. Correlation analysis was performed to quantify the association between female and male flower production. As the results, the significant difference of flower production among families was found in both seed orchards. The averages of female flower production were 65.3 and 181.9 in Q. acuta and Q. glauca. The positive Spearman's rank correlation was existed between male and female flower production. Broad-sense heritability on female and male flower production were 0.191 and 0.147 in Q. acuta, and 0.285 and 0.068 in Q. glauca, respectively. Sexual asymmetry (e.g., maleness index) between female and male, and contribution variation among families (e.g., parental balance) were analyzed to find reasonable alternatives in the management of seed orchards. Effective population size of seed crops was predicted as a concept of status number. Loss of gene diversity (accumulation of group coancestry) would not be alarming in the BSSOs. Our results would be helpful to select breeding materials for establishing new seed orchards and to supply genetically improved seeds of evergreen oaks, which is one of the backbones of the strategy of carbon sink in the 2050 Carbon Neutrality of Korea Forest Service.

• 한국농공학회논문집
• /
• 제63권3호
• /
• pp.87-95
• /
• 2021

The Doam Lake Watershed is one of Gangwon-do's non-point source management areas. This area has a lot of snowfall in winter, and it is expected that there will be a lot of soil erosion in early spring due to snow melting. In this study, snow melting was monitored in the Doam Lake watershed from February to 3, 2020. It was conducted to analyze the water quality changes by calculating the concentration of non-point source pollution caused by snowmelt, and to compare the concentration of water quality during snowmelt event with rainfall and non-rainfall event. As a result of water quality analysis, Event Mean Concentration (EMC) at the first monitoring was SS 33.9 mg/L, TP 0.13 mg/L, TN 4.33 mg/L, BOD 1.35 mg/L, TOC 1.84 mg/L. At the second monitoring, EMC were SS 81.3 mg/L, TP 0.15 mg/L, TN 3.12 mg/L, BOD 1.32 mg/L, TOC 3.46 mg/L. In parameter except SS, it showed good water quality. It is necessary to establish management measures through continuous monitoring.