• Parasites, Hosts and Diseases
• /
• 제39권3호
• /
• pp.223-226
• /
• 2001

In South Korea, the north border area has been under vivax malaria epidemic since 1993. However, Jeollabuk-do, which is about 300 kms from the border, has not experienced the same epidemic. 1 investigated a total of 58 notified cases of malaria in Jeollabuk-do in the year 2000. All of the cases had an exposure history in the epidemic area. Among them were 49 ex-soldiers, 3 soldiers who served near the border area and 6 civilians who traveled there. The causal agent of all cases was Plasmodium vivax. Except the civilians, the soldiers and ex-soldiers were aged in their twenty's. In the present study, the incubation period was from 6 to 520 days with a median of 157 days, and the latent onset type (92%) was more prevalent than the early onset type. illness onset of most cases (86%) peaked during the summer season (June to September) despite of variable incubation periods. The time lag for diagnosis ranged from 2 to 42 days with a median of 11 days. Jeollabuk-do has not been an area of epidemic untill now, but incidences have been increasing annually since 1996. In Jeollabuk-do, early diagnosis and treatment can be a feasible disease control measure to prevent spreading from the epidemic area.

• 한국환경과학회지
• /
• 제21권1호
• /
• pp.41-47
• /
• 2012

This study was carried out to investigate the distribution and their change of Pinus densiflora forests by climate change in Mt. Hallasan. The results showed that the areas of P. densiflora forests of Mt. Hallasan varied by region, with a total area of 1,324.3 ha, concentrated mostly in the region 1,000 m - 1,400 m above sea level. The temperate coniferous forest zone are distributed in the upper part of temperate forest zone composed of deciduous broad-leaved trees. Most of the P. densiflora forests in the lower parts were found not to be spreading because they are located close to the deciduous broad-leaved trees. However, the P. densiflora forests in the Sajebi and Pyeonggwe regions composed of the grasslands and shrub forests were found to be spreading. In addition, the altitude of the P. densiflora forests distribution increased by about 50 m and 90 m in the Sajebi and Pyeonggwe regions, respectively. The spread rate is expected to become faster than in the past due to the rate of climate change. The structure of the vegetation in Mt. Hallasan and the changes in the vegetation due to various factors need to be investigated from a long-term point of view.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 추계공동학술대회
• /
• pp.325-336
• /
• 2006

This research analyzes clean room major fire prevention standard of clean Room (FM, IRI, and NFPA Code), the structure of Performance-Based Fire Safety Design (PBD) applied the korean fire industry situation. Performance-Based Fire Safety can operate effectively the performance of fire protection equipment & building design, so the fitness of fire safety system can be embodied by operating this. moreover, cost to be consume fire safety of real building can reduce and Performance-Based Fire Safety is considered to important technique in fire protection field. A fire in a clean room may cause a serious loss by spreading smoke particles. We will be investigated by using a computational fluid dynamics, for loss prevention by smoke spreading from one fire area to another for clean room and compared the Performance-Based Fire Safety Design with the prescriptive code design. The methodology of fire safety performance-based fire safety design and guarantee of many kinds design skill of fire system and developing design procedure will be very serious one in order to improve efficiency of domestic system. Therefore, This research will be contributing to secure safety of clean room and to set up the performance-based fire safety design in Korea by regulation for the performance-based fire safety design effectively.

• 대한안전경영과학회지
• /
• 제8권5호
• /
• pp.211-229
• /
• 2006

This research analyzes clean room major fire prevention standard of clean Room(FM, IRI, and NFPA Code), the structure of Performance-Based Fire Safety Design(PBD) applied the korean fire industry situation. Performance-Based Fire Safety can operate effectively the performance of fire protection equipment & building design, so the fitness of fire safety system can be embodied by operating this. moreover, cost to be consume fire safety of real building can reduce and Performance-Based Fire Safety is considered to important technique in fire protection field. A fire in a clean room may cause a serious loss by spreading smoke particles. We will be investigated by using a computational fluid dynamics, for loss prevention by smoke spreading from one fire area to another for clean room and compared the Performance-Based Fire Safety Design with the prescriptive code design. The methodology of fire safety performance-based fire safety design and guarantee of many kinds design skill of fire system and developing design procedure will be very serious one in order to improve efficiency of domestic system. Therefore, This research will be contributing to secure safety of clean room and to set up the performance-based fire safety design in Korea by regulation for the performance-based fire safety design effectively.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.305-310
• /
• 1997

There are many parameters in prediction of forest fire spread. The variables such as fuel moisture, fuel loading, wind velocity, wind direction, relative humidity, slope, and solar aspect have important effects on fire. Particularly, wind and slope factors are considered to be the most important parameters in propagation of forest fire. Generally, slope effect cause different wind distribution in mountain area. However, this effect is disregarded in complex geometry. In this paper, wind is estimated by applying computational fluid dynamics to the forest geometry. Wind velocity data is obtained by using CFD code with Newtonian model and slope is calculated with geometrical data. These data are applied fer 2-dimentional forest fire spreading algorithm with Korean ROS(Rate Of Spread). Finally, the comparison between the simulation and the real forest fire is made. The algorithm spread of forest fire will help fire fighter to get the basic data far fire suppression and the prediction to behavior of forest fire.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1651-1656
• /
• 2005

This paper describes a natural frequency analysis conducted to find out a suitable working area for a spring-manipulator system generating a large vibrating force with mechanical resonance. Large force generation is one of the functions that we hope for a robot. For example, a weeding robot is required to generate a large force, because some weeds have roots spreading deeply and tightly. The spring-manipulator system has a spring element as an end-effector, so it can be in a state of resonance with the elasticity of the spring element and the inertial characteristics of the manipulator. A force generation method utilizing the mechanical resonance has potential to produce a large force that cannot be realized by a static method. A method for calculating a natural frequency of a spring-manipulator system with the generalized inertia tensor is proposed. Then the suitable working area for the spring-manipulator system is identified based on a natural frequency analysis. If a spring-manipulator system operates in the suitable working area, it can sustain mechanical resonance and generate a large vibrating force. Moreover, it is shown that adding a mass at the tip of the manipulator expands the suitable working area.

• 한국지반환경공학회 논문집
• /
• 제6권1호
• /
• pp.33-44
• /
• 2005

본 연구에서 실트폰드는 크기가 55만평의 인공연못 안에 두께가 3~20m의 초연약점토가 침전되어 있었다. 수중모래포설공법을 이용하여 +4.0m 까지 매립을 완료한 1996년에 PBD재를 타설하연서 지반개량을 시작하였다. 지반개량전 대형토조시험과 시험시공을 포함하는 대규모 사전실험을 통하여 초연약지반의 침하특성을 분석하였다. 재하초기에 대변형이 발생하는 초연약지반은 Terzaghi의 1차원 압밀과 달리 탄소성 거동을 보였다. 이러한 사전실험에 얻은 결과를 토대로 초연약지반의 지반개량을 성공적으로 수행하였다. 본 연구에서는 초연약지반에서의 지반개량의 성공사례를 제시한다.

• 지질공학
• /
• 제16권3호
• /
• pp.275-282
• /
• 2006

본 연구는 모형실험장치를 이용하여 인공강우에 의한 산사태 발생특성과 사태물질의 확산거동특성을 파악하기 위하여 수행되었다. 본 연구에서는 강우강도와 사면경사의 변화에 따른 다양한 실험조건하에서 일정 시간 간격으로 간극수압, 사면붕괴양상 및 변위, 그리고 토사의 확산면적 등을 각각 측정하였다. 실험 중 복수의 비디오 카메라와 디지털 스틸카메라로 촬영한 후, 이미지 분석을 실시하여 시간대별 산사태 발생양상 및 사태물질 확산특성 자료를 취득하였다. 실험결과에 따르면, 간극수압은 강우강도 및 사면경사에 비례하여 변화하며 이에 따라 강우강도 및 사면경사가 커짐에 따라 산사태가 발생할 가능성도 증가하였다. 사태물질의 확산면적은 강우강도, 강우지속시간, 그리고 사면경사의 증가에 비례하는 양상을 가짐을 확인하였다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제7권6호
• /
• pp.653-660
• /
• 2001

최근 인터넷을 기반으로 한 정보 환경의 범위는 단순한 정보 제공의 차원을 넘어서서 비즈니스를 구성하는 핵심 부분에까지 확산되고 있다. 특히, 마크업 언어에 근거한 기술은 WWW기술의 확산과 함께 인터넷 기반의 비즈니스에서 매우 중요한 부분으로 부각되고 있다. 하지만, 대표적인 마크업 언어인 SGML로 구성되어 있는 자료는 SGML 브라우저를 이용하여 보아야 하기 때문에, 웹 브라우저를 기반으로 하는 인터넷 사용자에게 정보를 제공하기 어렵다. 더구나, SGML 브라우저간의 호환성이 결여되어서, 상호 자료의 공유에도 많은 문제점을 안고 있었다. 이러한 점에 착안하여, 이번 연구에서는 기존의 SGML자료를 SGML의 특성을 유지하면서 웹에 적용할 수 있도록 XML자료로 변환하는 것에 대하여 사례연구를 통해 상세한 기법을 제시하였다. 이번 연구의 내용은 동일한 구조를 가지는 3Tera의 SGML자료에서 600MB의 SGML자료를 선별하고 이를 기반으로 수행한 Pilot Project의 결과이다. 이번 연구에서 개발된 기법은 SGML 자료를 XML자료로 변환하는 것과, Migration을 위한 전체 시스템 구조 그리고, Migration된 SGML문서에 대한 Web 환경에서의 Access방법으로서, 기존의 SGML 방식보다 자료 표시속도를 줄일 수 있고, Mobile Computing이 가능하며, 기존 자료의 변환에 따른 업무의 연속성 및 자료의 공유를 보장하는 기법이다. 그러므로 이러한 분야에 관심을 가지는 실무자들에게 매우 도움이 되리라 생각된다.

• 농촌지도와개발
• /
• 제17권4호
• /
• pp.919-931
• /
• 2010

Forage barley was developed for decreasing the import of forages, and increasing the farmer' income about ten years ago. Nevertheless of higher of farmer' income, the forage barley' area is slowly increased because of lacking of barely seeds. In order to suggest the plan of the urgent spreading on forage barley, the seed-gathering of forage barley was cultivated on 14-provinces and 291ha on 2009. The cultivation area of kyeungnam, kyeungbuk and chunnam province was more than other provence. The youngyang cultivar was cultivated more than orher cultivar. Seed-gathering amount of Youngyang, Uhoo and Yooyun cultiva was 364,213 and 303MT respectively. There were several problems for seed-gathering of forage barley which were the delay of seeding time and the more seeding amount, and the higher seed drying temperature than that of standard manual.