• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.901-906
• /
• 2005

In this paper, we propose a novel MHCOC (Mapped High Capacity Orthogonal Code) SS(Spread Spectrum) technique that reduces high PAPR (Peak power to Average Power Ratio) of HCOC SS system which was proposed to support high data rate transmission, and we compare to the conventional modulation technique such as MQAM SS that can transmit the same number of symbols at the same time. Moreover, we study on adaptation of this system to satisfy QoS (Quality of Service) that services the proper data rate according to the propagation channel quality information. We perform computer simulation to verify the performance of the proposed system and analyze its availability.

• Ocean and Polar Research
• /
• v.30 no.2
• /
• pp.129-140
• /
• 2008

As a preliminary effort to establish a data assimilative ocean forecasting system, we reviewed the theory of the Ensemble Kamlan Filter (EnKF) and developed practical techniques to apply the EnKF algorithm in a real ocean circulation modeling system. To verify the performance of the developed EnKF algorithm, a wind-driven double gyre was established in a rectangular ocean using the Regional Ocean Modeling System (ROMS) and the EnKF algorithm was implemented. In the ideal ocean, sea surface temperature and sea surface height were assimilated. The results showed that the multivariate background error covariance is useful in the EnKF system. We also tested the sensitivity of the EnKF algorithm to the localization and inflation of the background error covariance and the number of ensemble members. In the sensitivity tests, the ensemble spread as well as the root-mean square (RMS) error of the ensemble mean was assessed. The EnKF produces the optimal solution as the ensemble spread approaches the RMS error of the ensemble mean because the ensembles are well distributed so that they may include the true state. The localization and inflation of the background error covariance increased the ensemble spread while building up well-distributed ensembles. Without the localization of the background error covariance, the ensemble spread tended to decrease continuously over time. In addition, the ensemble spread is proportional to the number of ensemble members. However, it is difficult to increase the ensemble members because of the computational cost.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.47-55
• /
• 2010

The power line communication channel has characteristic variation problems which are caused by load. The spread spectrum technique has been used to overcome these problems. One of that is the direct sequence spread spectrum(DS/SS) system which is not necessary to additional hardwares. The BER of DS/SS system is decreased by longer length of PN code, but data transfer rate is decreases, so data transfer rate is hard to satisfies their own specifications especially in narrowband PLC systems. Spread Spectrum system with Dual-processing Gain tries to reflect cyclic characteristics of power line noise. But that system assumes that shapes of power line channel are symmetrical with respect to the 1/4 point of main frequency(60Hz in Korea), therefore cannot achieves various shapes of real power line noise. Thus in this paper, noise adaptive DS/SS system which PN code is changed by noise levels for various channel noises is proposed and simulated. The different kinds of noises are modeled and measured for simulation, the proposed system is verified that has lower data transfer rate and lower error rate than conventional system by simulation results.

• Composites Research
• /
• v.33 no.3
• /
• pp.161-168
• /
• 2020

In this paper, we have studied the mechanical properties of thermoplastic carbon fiber fabric composites with spread technology and compression molding temperature were investigated. Carbon fiber reinforcement composites were fabricated using commercial carbon fiber fabrics and spread carbon fiber fabrics. Mechanical properties of the commercial carbon fiber composites (CCFC) and spread carbon fiber composites (SCFC) according to compression molding temperatures were investigated. Thermal properties of the polypropylene film were examined by rheometer, differential scanning calorimetry, thermal gravimetric analysis. Tensile, flexural and Inter-laminar shear test. Commercial carbon fiber reinforcement composites and spread carbon fiber composites were fabricated at 200~240℃ above the melting temperature of the polypropylene film. Impregnation properties according to compression molding temperature of the polypropylene film were investigated by scanning electron microscopy. As a result, as the compression molding temperature was increased, the viscosity of the polypropylene film was decreased. The mechanical properties of the compression molding temperature of 230℃ spread carbon fiber composite was superior.

• Korean Journal of Food Science and Technology
• /
• v.23 no.4
• /
• pp.478-484
• /
• 1991

As a work on the preparation of spread type product using chungkook-jang, proximate composition and enzyme activity of chungkook-jang were analyzed and extrusion capillary viscometer was made. The effects of moisture content, oil type and content and temperature on the rheological properties of chungkook-jang spread were investigated. As the moisture content of chungkook-jang spread increased from 55% to 65%, apparent viscosity $({\eta}a)$ decreased and spreadibility and L value in Hunter color system increased. On the contrary, as the added oil content of chungkook-jang spread increased from 10% to 30%, rla increased and spreadibility and L value decreased. Specially, in case of palm olefin addition, the rla of chungkook-jang spread was more high than that of soybean oil addition. As the temperature of chungkook-jang spread increased, rla decreased and spreadibility increased. In the same conditions, the ${\eta}a$ of chungkook-jang spread increased in order of B. natto, B. natto and B. subtilis mixture and B. subtilis fermentation.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.75-79
• /
• 2008

As Information Technology developed, Information requirement has been went higher. In the field of GIS(Geographic Information System) more information is processed more quickly and accurately. Especially, quick analysis of forest fire information (topography, ignition point, weather condition, etc.) over a wide area is essential in order to minimize victim, environmental damage, and economical damage, decide course of evacuating, estimate a fire spread course, and attack resource arrangement. We determined a fire spread distance at each unit time through an experiment with various slope degrees and distinction of flat, upslope and downslope. For the tests on the upslope, as the slope increased, the rate of spread increased. On the downslope in contrast with the upslope, as the slope increased, the rate of spread decreased. We analyzed a spread rate of forest fire on each slope as the method classified upslope(+) and downslope(-) using the results obtained from the experiment. Consequently, the proposed method is able to be used to effectively support the attack of forest fire by providing accurate predictions of fire spread.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.300-303
• /
• 2003

In this paper, a baseband module of the spread spectrum system with FPGA is designed. A spread spectrum system spreads the signal bandwidth necessary for information transmission. We focused on the design of FEC decoder, especially the convolutional code fo constraint length K=3, rate R=l/2, is designed. For the VHDL design the Xilinx Foundation 3.1 is used. As results, a spread spectrum modem with convolutional coding is designed and we have plan to apply this modem to short distances wireless communication.

• Journal of IKEEE
• /
• v.16 no.1
• /
• pp.51-55
• /
• 2012

In this paper, we propose to employ a ternary sequence as a cyclic code shift keying (CCSK) modulation sequence. And we simulate the performance in a frequency hopping spread spectrum/time division multiple access (FHSS/TDMA) system with CCSK. Wireless channel is modeled as Rayleigh fading channel. From the simulation results, it is demonstrated that the system adopting the ternary sequence as a CCSK sequence has higher performance than that with a random sequence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.593-601
• /
• 2000

In a multi-bandwidth CDMA system, the performance of multiple order selection combining rake receivers are analyzed according to the spreading bandwidth of the system and the delay spread of the Rayleigh fading channel. The results for various channel environments indicate a tradeoff between total received signal energy and multipath fading immunity. Increasing the occupied bandwidth of the system(wide-bandwidth spreading) gives better performance for small delay spread environments, while gathering more energy(narrow-bandwidth spreading)gives better performance for large delay spread environments. It is shown that the performance difference between low and high order selection combining grows larger as the spreading bandwidth increases. It is also noted that performance degrades by increasing the bandwidth above a certain point and the optimum spreading bandwidth for each channel environment decreases as the delay spread of the channel increases.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.813-820
• /
• 2010

The spread mooring system for FPSO is developed to explore deep sea area, in which swell is dominant. It is known that the tension response of mooring lines in this sea area shows bimodal spectrum. Assuming normal distribution of tension profile and Rayleigh distribution of tension amplitude, the power spectral density function (PSD) of the mooring tension under the bimodal stationary random process is applied for the calculation of spectrum fatigue. Three popular methods, which are simple summation method, combined spectrum method and Jioa-Moan method, are used to combine fatigue damages from bimodal spectrum characteristics. Each damage value is compared with damage using Rainflow Cycle Counting (RCC) method which is believed to be close to exact solution. Vanmarcke' parameter and RMS(Root Mean Square) ratio are employed to assess relative damage variations between from RCC method and from three combination methods. Finally the most reliable fatigue damage combining method for spread mooring system is suggested.