• Corrosion Science and Technology
• /
• v.11 no.6
• /
• pp.263-269
• /
• 2012

Copper alloys are commonly applied to ship's propellers, pumps and valves which are serviced in seawater due to their good castability and corrosion resistance. In the environment of high flow velocity, however, erosion damage predominates over corrosion damage. In particular, the cavitation in seawater environment accelerates surface damage to copper alloys, resulting in degradation of products and economic losses and also threatening safety. The surface was coated with WC-27NiCr by high velocity oxygen fuel(HVOF) spraying technique to attain durability and cavitation resistance of copper alloys under high velocity/pressure flow. The cavitation test was performed for the WC-27NiCr coating deposited by HVOF in seawater at the amplitude of $30{\mu}m$ with seawater temperature. The cavitation at $15^{\circ}C$ caused exfoliation of the coating layer in 17.5 hours while that of $25^{\circ}C$ caused the exfoliation in 12.5 hours. When the temperature of seawater was elevated to $25^{\circ}C$ from $15^{\circ}C$, more damage was induced by over 160%. Although WC-27NiCr has good durability, corrosion resistance and eletrochemical stability, the cavitation damage rate of the coating layer could remarkably increase at the elevated temperatures under cavitation environments.

• Korean Journal of Materials Research
• /
• v.24 no.2
• /
• pp.98-104
• /
• 2014

Vacuum kinetic spray(VKS) is a relatively advanced process for fabricating thin/thick and dense ceramic coatings via submicron-sized particle impact at room temperature. However, unfortunately, the particle velocity, which is an important value for investigating the deposition mechanism, has not been clarified yet. Thus, in this research, VKS average particle velocities were derived by numerical analysis method(CFD: computational fluid dynamics) connected with an experimental approach(SCM: slit cell method). When the process gas or powder particles are accelerated by a compressive force generated by gas pressure in kinetic spraying, a tensile force generated by the vacuum in the VKS system accelerates the process gas. As a result, the gas is able to reach supersonic speed even though only 0.6MPa gas pressure is used in VKS. In addition, small size powders can be accelerated up to supersonic velocity by means of the drag-force of the low pressure process gas flow. Furthermore, in this process, the increase of gas flow makes the drag-force stronger and gas distribution more homogenized in the pipe, by which the total particle average velocity becomes higher and the difference between max. and min. particle velocity decreases. Consequently, the control of particle size and gas flow rate are important factors in making the velocity of particles high enough for successful deposition in the VKS system.

• The Korean Journal of Community Living Science
• /
• v.22 no.4
• /
• pp.615-621
• /
• 2011

This study was conducted to evaluate of the protection efficiency in each part of developed pesticide-proof clothes by repeated washings. We investigated the effect of repeated laundering on mechanical properties of pesticide-proof clothes (not washed vs 5 times washed). We also examined pesticide infiltration rate into the pesticide-proof clothes by repeated laundering. The patches(TCL paper, surface area 50cm2)were attached to the inside of pesticide-proof clothes(head, chest, right upper-arm, right forearm, left thigh, left calf, back) which subjects had dressed in during pesticide spraying. The patches were detached from working clothes after work. For the extraction of pesticide in pesticide-proof clothes, sonication was applied for 30 min with methanol. The gas chromatography/mass spectrometry (GC/MS) was applied to identify the pesticide component. The results of this study are as follows: The force strength, water-vapour resistance and surface wetting resistance of pesticide-proof clothes decreased 5 times more in washed clothes. The concentration of pesticide was the highest in the head area of pesticide-proof clothes. In seven parts of TLC paper attached to the pesticide proof clothes, the concentration of pesticide was higher in the left thigh. The penetration part and concentration of pesticide increased as washing was repeated. Therefore the conclusion which can be drawn from this study is this: protection efficiency of pesticide-proof clothes decrease by repeated washings.

• Korean Journal of Organic Agriculture
• /
• v.26 no.3
• /
• pp.439-452
• /
• 2018

This study was carried out to establish of environment-friendly control system and to survey the occurrence status of Ricania shanthungensis in Jeonnam province from 2016 to 2017. R. shanthungensis occurred at 1,344 ha in 61 towns of 15 cities in Gwangju and Jeonnam province. At four sites in the stationary area, the densities of eggmass and pupae were lower in 2017 than in 2016, the hatching rate decreased, and the first hatching time, emergence of adults, and the start of spawning tended to be slower. Telenomus sp., an egg parasitoid of R. shanthungensis, was found in most areas. Sunchon had the highest rate of 46.1%, followed by Muan 40.6, Goksung 29.2, Gurye 25.8, and Gwangju 17, respectively. The optimum spraying time for the control of R. shanthungensis was early March. The spraying material and the dilution multiples are 10 times of the machine oil at environmental friendly cultivation and 500 times of the chlorpriphosphate wp. at normal cultivation. When sprayed these materials, 95% of egg prohibited to hatch. There was more than 80% of the insecticidal effects on the organic materials of the machine oil emulsion, the Sophora root extrect + microbial extract agent, and the castor emulsion. For adults, Sophora root extrect + microbial extract, neem extract, and machine oil were better. Four kinds of chemical pesticides such as dinotefuran wp were effective for nymph and adult control. We have developed an adult catching device using the most preferred daylight color and behavioral habits of R. shanthungensis. The capture device consisted of two daylight compact lamps (30W and 20W), a yellow plate, and a catcher using water, and caught about 700 individuals a day. Based on the above results, we have established a system for controlling and life cycle of R. shanthungensis in Jeonnam province.

• Journal of agriculture & life science
• /
• v.46 no.3
• /
• pp.119-127
• /
• 2012

For the promotion of the evaporative cooling efficiency of hot air in greenhouse in summer, a fog sprayer consisted of a high volume spraying two-fluid nozzle with turbo fan and a blowing fan was set up at 2.2 m height from bottom of small glass greenhouse and tested to estimate the possibility of the greenhouse cooling. The mean droplet size and the volume sprayed by one of fog sprayer were $29{\mu}m$ and $160m{\ell}/min$. All the droplets sprayed and blown by the fog sprayer were evaporated within 2 m radius. The result from the cooling test that two sprayers set up in glass greenhouse of plane area $228m^2$ was represented lower cooling effect that the temperature and relative humidity of inside air of greenhouse were $28.8^{\circ}C$ and 87.5% when those of outside air of greenhouse were $30.2^{\circ}C$ and 81.2%. Through investigation of literatures and results of the cooling test, it was estimated that the water spraying rate of evaporative cooling of single span greenhouse with 50% light curtain and with air change rate of 1 volume/min was $10m{\ell}/min/m^2$ so that the inside air temperature may cool down $2{\sim}3^{\circ}C$ on the basis of $35^{\circ}C$ atmospheric temperature in summer of south korean area.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.142-150
• /
• 2023

As global warming continues, the time of invasion of Spodoptera frugiperda has been advanced and the inflow rate has been increasing, leading to great increases in damage to crops. In this study, in order to minimize crop damage caused by S. frugiperda, the control period was set for corn fields through control thresholds, and the control effects according to the chemical spraying methods were investigated in forage corn filed. Even under the condition of 4% injury level during the corn silking stage, the damage rate of ear was 70%, showing an aspect of extensive damage. The economic injury level of S. frugiperda second instar larvae was shown to be 0.7 larvae per stalk, and the control threshold level was shown to be 0.6 larvae. The income was calculated by applying the corn wholesale unit price, and according to the result, even under the condition of injury level of 4%, there was a loss of KRW 895,221/10a, and the higher the injury level, the greater the decrease in income. To control S. frugiperda, the insecticidal effects of 10 single formulations registered for S. frugiperda were tested, and according to the results, four types(emamectin benzoate, chlorantraniliprole, indoxacarb, and spinetoram) showed high insecticidal activity not lower than 93.3%, and three types (chloran- traniliprole, spinetoram, and indoxacarb) were considered to be effective in controlling S. frugiperda as they showed high residual effects through insecticidal effect persistence tests. Therefore, conventional control and aerial control were conducted twice at 7-day intervals with indoxacarb SC and chlorantraniliprol WP, which show high activity against S. frugiperda, respectively, prior to the silking of forage corn. As a result, conventional control showed higher control values, 46.3%p in the case of indoxacarb SC and 21.7%p in the case of chlorantraniliprol WP, than aerial control through the primary control. In the secondary control too, higher control values of 26.7%p in the case of indoxacarb SC and 40.4%p in the case of chlorantraniliprol WP were found in conventional control than in aerial control. Therefore, it is considered necessary to prepare measures to improve the control effects in the recent situation where alternative methods for manpower control are widely used.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.767-772
• /
• 2006

In this study, we sought to produce a double layer microcapsule containing Lactobacillus sp. as the core material. The conditions for this microencapsulation process were optimized for the formation of a microcapsule with high storage stability. The effects of the ratio of[core material] to [wall material], the type and concentration of emulsifier used, the stirring rate(dispersibility) and the temperature of the dispersion fluid on the microencapsulation yield were studied. The optimal concentration and type of emulsifier required in order to allow for the stable formation of a W/O type emulsion (a primary process in double layer microencapsulation) were 1.00% (w/w) and polyglycerol polyricinileate (PGPR, HLB 0.6). However, the optimal concentration and type of emulsifier required to construct a W/O/W type emulsion (a secondary process in double layer microencapsulation), were 0.65% (w/w) and polyoxyethylene sorbitan monolaurate (PSML, HLB 16.7). Finally, we obtained a maximum yield of microencapsulation with a dispersion fluid stirring rate of 270rpm and a dispersion fluid temperature of 10$^{\circ}C$ after spraying a W/O/W type emulsion into the dispersion fluid.

• The Korean Journal of Pesticide Science
• /
• v.11 no.4
• /
• pp.281-288
• /
• 2007

This research was carried out to propose the Korean method for estimating the agricultural occupational pesticide exposure level in orchard. The UK-POEM (UK-Predictive Operator Exposure Model) was proposed as a bench-marking model and analysed its performance properties. To extrapolate the Korean agricultural conditions, application equipment, application method, work rate per day, application volume and spraying time of pesticide was surveyed for Korean 204 orchard farmhouse. This survey indicate that the major application equipments are speed sprayer(64.9%) and motor sprayer(33.9%). When they spayed the pesticide with a speed sprayer, they worked for more than 4 hours on area of 4 ha per day. In case of using motor sprayer, they worked for more than 4 hours on area of 1 ha. Based on the above survey result, Korean method for estimating the pesticide exposure level of agricultural worker was proposed finally.

• Korean journal of applied entomology
• /
• v.21 no.2 s.51
• /
• pp.87-94
• /
• 1982

The mymarids egg parasite of rice planthopper, Anagrus nr. flaveolus, were investigated to know their parasitic activities after overwitering in the paddy banks and barley fields, their host preferences and seasonal variations in the pesticide sprayed and unsprayed paddy fields of Gyeongnam province O.R.D. at Jinju from 1977 to 1979. The parasitic activities of Anagrus nr. flaveolus after overwintering in the paddy banks were high early in April and tended to decrease remarkably since mid-April by moving to the barley fields. The parasitic rate of Anagrus nr. flavelous was $47.2\~88\%$ between middle and late in April, the peak of egg deposition period. Anagrus nr. flaveolus parasitized Laodelphax striatellus, Nilaparvata lugens, and Sogatella furcifera, but didn't attack the eggs of Nephotettix cincticeps in the paddy fields. High preference was observed with Laodelphax steriatellus. The parasitic activities of Anagrus nr. flaveolus in the pesticide sprayed paddy fields were high in early July and from late August to early September. The parasitic rate in the pesticide unsprayed fields were higher than those of sprayed fields during the pesticide spraying period, from July to August and parasitic activities were active from October to before coming winter.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.78-83
• /
• 1982

Seedling blight of sesame (Sesamum indicum L.) is one of the most serious diseases in Korea. This study was performed to control seedling blight in the field where sesame has been cultured for 4 years of Industrial Crop Division at the Crop Experiment Station. The pathogenic fungi of seedling blight which is known Fusarium oxysporum f. vasinfectium and Rhizoctonia solani was inoculated to the wheat media and it was spreaded on the experimental field in the concentration of 109 of wheat media mixed with 10g of fine soil. Seed sterilization was the most effective method for seedling blight control for two year experiment. Seed sterilant Benlate-T was highly effective for con trolling seedling blight with infection rate of 4% and yield of 40.7kg per 10a comparing to the control with infection rate of 96% and grain yield of 6.4kg per l0a, the other chemicals, Busan 30, Vitathiram, Captan showed good effect to control seedling blight, but less effect to the Benlate-T. The spraying treatments on leaf surface 25 days after sowing were not effective to seedling blight.