• 한국지역사회생활과학회지
• /
• 제17권4호
• /
• pp.49-56
• /
• 2006

The purpose of this study was to evaluate the thermal and subjective comfort of various pesticide-proof clothes made from different material. Seven male adults took part in the study, conducted in a climate-chamber controlled with an ambient temperature of $30^{\circ}C$ and a relative humidity of 60%RH. The thermal and subjective responses of subjects wearing pesticide-proof clothing made of Goretex(coating treatment), polyester (water-repellent treatment), non-woven(coating) and nylon(coating) were measured. The main results were summarized as follows: (1) Change of rectal temperature and clothing microclimate were inhibited more effectively in pesticide-proof clothing made of Goretex, polyester and non-woven than nylon materials. (2) Mean skin temperature at the end of the experiment was significantly higher in subjects who wore nylon than non-woven and Goretex, and was lowest in those with pesticide-proof clothing made of polyester. (3) Change of heart rate was significantly lower in subjects with Goretex and polyester clothiing than those with non-woven, and in those with nylon, it was highest. (4) Subjective comfort was greater in subjects with Goretex, polyester and nonwoven clothing than nylon, except for thermal sensation. Thermal sensation was greater in order of polyester, Goretex, non-woven and nylon. Thus, it was concluded that pesticide-proof clothing made of Goretex, polyester and non-woven material could reduce thermal stress during the spraying of pesticides in summer.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.50-50
• /
• 2017

Swampland is a potential alternative land to be used in various agricultural production activities in Indonesia, because Indonesia have 33.41 million hectares of swamp land that consists of 13.28 million hectares nontidal swamp and million hectares 20.13 tidal swamp. In the province of South Sumatra, because of unpredictable water level in the field before planting, farmers have been doing agronomic adaptation method through the delay time of transplanting and forced to apply more than one the nursery practice with the combination of a floating nursery method and a dry-bed nursery method. This study was aimed to (1) evaluate the seedling growth and tillering pattern of several popular Indonesian rice varieties, and (2) look for alternative technologies to get a better rice seedlings under two nursery methods in the nontidal swamp land. In the first experiment, the seedling growth characteristics of five rice varieties (Ciherang, Inpara 5, Inpara 9, Inpari 29, and Inpari 30) was evaluated by two methods of nursery, i.e. floating nursery and dry-bed nursery. In the second experiment, rice variety of Inpari 30 was treated with Zn seed priming and foliar fertilizer of 2,300 ppm N at the nursery stage. Those treatments were combined with the time of seedling under floating and dry-bed nursery. The results of the first experiment showed that of the five varieties tested, dry-bed nursery method showed better seedling growth than floating nursery. This was indicated by high leaf number, tiller number, tillers pattern, shoot-root ratio and relative growth rate. Ciherang and Inpari 30 showed high tiller number, and they had produced tertiary tiller in the sixth week of observation. Moreover, shorter period of floating and dry-bed nursery in combination with the treatment of Zn seed priming and spraying seedling with foliar fertilizer N could improve the growth of seedlings.

• The Plant Pathology Journal
• /
• 제24권3호
• /
• pp.309-316
• /
• 2008

Mycelium of Ophiostoma quercus albino strain cultured in liquid culture media was harvested, lyophilized, and stored for examining biocontrol efficacy against wood discoloration by staining fungi in the laboratory and field conditions. Dry weight of mycelium grown in brown sugar yeast extract broth(BYB) showed 3.8 times higher than that grown in potato dextrose broth(PDB). The optimum culture period in BYB was 4 weeks. In vitality test of the albino strain, the lyophilized mycelium stored in liquid nitrogen($-196^{\circ}C$) or in a refrigerator($4^{\circ}C$) kept the vitality until 13 months after storage; however, the mycelium stored at room temperature lost the vitality completely after 13 months. The mycelium stored in liquid nitrogen or in a refrigerator protected wood chips from the discoloration by pretreating mycelial suspension on pine wood chips. The mycelium stored at room temperature for 7 months also showed complete protection. These results suggest that the lyophilized mycelium have a biocontrol efficacy only if it keeps the least vitality. In the field conditions, both albino strain and $Woodguard^{(R)}$(commercial chemical protectant) showed significant differences(p=0.05) in discoloration rate as compared to the non-treated control when these were treated on the wood logs of Pinus rigida. The albino strain showed better protection than $Woodguard^{(R)}$. Isolation frequency of blue stain fungi from the chips of wood logs treated with the albino strain was 0% at three months after treatment, while that treated with $Woodguard^{(R)}$ was 76.7%. In another experiment, pre-treatment of mycelial suspension on the cut surface of wood logs also showed significant protection from wood discoloration. Spraying of both albino strain on the cut surface and insecticides on the bark also showed relatively good control effects as compared to insecticide alone on the bark or nontreated control.

• 한국공작기계학회논문집
• /
• 제15권6호
• /
• pp.32-37
• /
• 2006

Micron size Co-alloy(T800) powder was coated on Inconel 718 by HVOF thermal spraying for the studies of the improvement of durability of high speed spindle by using Taguchi program for the parameters of spray distance, flow rates of hydrogen and oxygen and powder feed rate. The optimal coating process was determined by the studies of coating properties such as micro-structure, porosity, surface roughness and micro hardness. Friction and wear behaviors of coatings were investigated by sliding wear test at room temperature and $1000^{\circ}F(538^{\circ}C)$. At both room temperature and $538^{\circ}C$ the sliding wear debris and friction coefficients of the coating were drastically reduced compared with the surface of non-coated parent material. This shows that Co-alloy powder coating is highly recommendable for the durability improvement surface coating of high speed air-bearing spindle. At high temperature wear traces and friction coefficients of both coating and non-coating were drastically reduced compared with those of room temperature since the brittle oxides were formed easily on the surface, and the brittle oxide phases were attrited by the reciprocating sliding wear according to the complicated mixed wear mechanisms These oxide particles, partially melts and the melts play role as lubricant and reduce the wear and friction coefficient. This also shows that Co-alloy powder coating is highly recommendable far the durability improvement surface coating on the surface vulnerable to frictional heat such as high speed spindles.

• 한국약용작물학회지
• /
• 제22권6호
• /
• pp.483-488
• /
• 2014

Lime-bordeaux mixture (LBM) has been used instead of pesticides in ginseng field and orchard since the 1960's in Korea. In this experiment, LBM was made with different concentrations and sprayed in the field of ginseng for eco-friendly cultivation. Growth characteristics and disease such as alternaria blight, anthracnose, and gray mold were investigated in 4-5 year old ginseng after spraying LBM. LBM caused a little damage on leaf when it was sprayed at the time of leafing stage, late April and early May. Root weights of five-year-old ginseng were 43.1~51.5 g and 41.2~46.6 g in the plot of mid-April and mid-May treatments, respectively. These growth levels were further reduced as compared with that of the chemicals treatment plot. The rate of diseases in the plot of 6-6 and 8-8 ratio were 0.0~4.8% and 0.0~4.4%, respectively, which was similar with that in the plot of chemical control for alternaria blight and anthracnose. However, LBM had little effect on controling gray mold. It showed lower control effect in the plot of 4-4 ratio than that of chemical control. This result will be expected to be a useful guide that can be used in the field to the farmers of the ginseng.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1229-1235
• /
• 2014

LPG차량의 공기 흡입 시스템에서 먼지 입자의 대부분은 공기 청정기를 통해 제거되지만, 아주 작은 입자는 제거되지 않고 흡기계통에 축적되게 된다. 이 축적된 카본은 공회전 속도 제어와 센서신호 그리고 배출가스에 영향을 주게 된다. 또한 엔진 채터링 현상이나 자동변속기의 변속시점 불량등을 야기시킨다. 이 연구는 세척액을 사용하여 흡기계통을 세척하는 것에 관한 것이다. 워밍업된 챠량에서 흡입호스를 제거하고 세척액을 사용하여 가속시에 세척액을 흡입장치에 분사시켜 흡기계통을 세척하는 것이다. 세척액을 사용하여 스로틀 바디, ISC, 서지탱크, 흡입매니폴드, 흡기밸브, 연소실까지 세척함으로서 다음과 같은 실험결과를 얻을 수 있다. 스로틀 밸브가 정확하게 작동되어 TPS의 센서 신호 전압이 개선되었으며, 차량이 정지하는 경우 ISC 시스템은 공회전 속도 제어를 원활하게 작동하였다. 또한 일산화탄소는 약 0.15 %, 탄화수소는 약 20~100PPM으로 각각 감소되어 배기가스가 현저하게 개선되었다.

• Design & Manufacturing
• /
• 제12권2호
• /
• pp.34-39
• /
• 2018

The biggest topics in the automobile industry are light weightening and fuel efficiency improvement. There's a lot of research going on. It is focused on light weight materials. Light weight material is seen as the best way to reduce fuel consumption and to solve the problem of environmental pollution and resource depletion. For the light weight materials, new materials such as aluminum, magnesium, and carbon-hardening materials can be found. Research on the joining techniques of dual materials, improvement of material properties by improving the method of manufacture of existing materials, and studies on ultra-high strength steel sheets are expected to take up the most weight in lightweight materials. As the strength of the ultra-high strength steel sheets increases during forming, it is difficult to obtain dimensional precision due to the increase in elastic restoring force compared to mild or high strength steel sheets. Spring back is known to be affected by a number of factors due to poor plastic molding, and can be divided into the effects of the material spraying and the process. The study on the plasticitic variables were studied as plasticitic factors that can be controlled by a part company. Tensile testing of ultra-high strength materials was conducted to derive properties for plasticitic analysis and to analyze spring back with two factors controlling the height of the bead and blank holding force by adding tensile force and controlling the flow rate.

• 한국환경농학회지
• /
• 제2권1호
• /
• pp.1-5
• /
• 1983

수원(水原) 및 리리(裡里) 2개포장(個圃場)에서 diazinon립제(粒劑)의 토양중(土壤中) 잔류소장(殘留消長)을 구명(究明)하고 약제(藥劑) 철포회수(撤布回數) 및 시기별(時期別)로 수확(收穫)한 현미(玄米) 및 볏짚중 diazinon의 잔류양(殘留量)을 조사(調査)한 결과(結果)는 다음과 같다. 1) 수원(水原) 및 리리(裡里) 포장조건하(圃場條件下)에서 토양중(土壤中) diazinon의 반감기(半減期)는 $9{\sim}12$일(日)로 철포회수(撤布回數)와 포장간(圃場間)에 큰 차리(差異)가 없었다. 2) 실험실시험(實驗室試驗)에서 diazinon의 토양중(土壤中) 반감기(半減期)는 수원토양(水原土壤)에서 12.6일(日), 리리토양(裡里土壤)에서 11.6일(日)이었다. 3) 락제처리별(樂劑處理別) 현미중(玄米中) diazinon의 잔류양(殘留量)은 부검출(不檢出)${\sim}0.14ppm$으로 이에 따른 안전사용기준(安全使用基準)은 수확전(收穫前) 15일한(日限), 살포회수(撒布回數) 4회 이내(回 以內)였다. 4) 볏짚 중 diazinon의 잔류양(殘留量)은 $0.08{\sim}4.76ppm$의 범위(範圍)였다.

• 한국식물병리학회지
• /
• 제11권1호
• /
• pp.9-16
• /
• 1995

Undiluted neoasozin solution (6.5% a.i.), an arsenic fungicide, was sprayed on 169 cankers of apple trees from early March to September in 1987 twice at intervals of one week without scraping off the affected barks. Among the treated cankers, 79.9% ceased to grow within 1∼7 weeks, 13.0% showed partial development, and 7.1% grew continuously to girdle the branches. The partially developed cankers, however, could also be cured by an additional spray after slightly piercing at the edge of cankers to facilitate the penetration of the chemical. When the canker growth was blocked, cankers were encircled by cracks developed at the marginal area of the cankers. If the cracks developed once, very few cankers grew beyond them. The above results suggest that the crack development may be the consequence of the host defense activity to wall off the pathogen. In addition to the curative efficacy, the neoasozin solution inhibited sporulation of the pathogenic fungus almost completely. However, the pathogen survived for more than three months in some cankers that externally appeared to be cured, suggesting that an indirect mode of action of the chemical against apple Valsa canker seems to be still more persuasive than the direct fungicidal effect. In the final examination conducted in the mid April of the next year, 72.7% of the cankers were completely cured by the two successive neoasozin treatments. Moreover the cure rate became 83.1% if that of partially developed cankers which were also completely cured by an additional treatment was also taken into account. Since 1989 when this method was widely applied in apple orchards in Korea, apple Valsa canker has been effectively controlled to reach a tolerable level.

• 한국재료학회지
• /
• 제30권1호
• /
• pp.38-43
• /
• 2020

Sand casting 3D printing uses a binder jetting method to produce a mold having complicated shape by spraying a binder on sand coated with activator. Appropriate heat treatment process in sand mold fabrication can increase the degree of polymerization to improve flexural strength. However, long heat treatment of over 24 hours decreases flexural strength and reliability due to chemical bond decomposition through thermal degradation. The main role of the activator is to control the reaction rate between the polymer chains. As a result, when the activator composition is increased from 0.15 wt% to 0.25 wt%, the flexural strength is increased by 218 N/㎠. However, excess activator (0.40 wt%) has been shown to decrease reliability without increasing flexural strength. The main role of the binder is to control the flexural strength of the specimen. As the binder composition is increased from 2.00 wt% to 4.00 wt%, the flexural strength increases to about 255 N/㎠, indicating the maximum flexural strength increase. Finally, the reliability of the flexural strength of the fabricated specimens is evaluated by a Weibull plot. Weibull modulus calculations are used to evaluate the flexural strength reliability of the specimens, and maximum reliability value of 11.7 is obtained at 0.20 wt% activator composition. Therefore, it is confirmed that this composition has maximum flexural strength reliability.