• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.66-71
• /
• 2009

In this study, I evaluated toxicity that analyze performance of flame-retardant about flame-retardant painting wood and combustion gas that is based on the toxicity index. Processing condition of flame retardant solution and treatment method of samples didn't affect greatly to performance of flame retardant. Occurrence of combustion gas showed a almost similar result from the sample which spraying flame retardant solution and toxicity corresponds to high level, Hazard Class III, and the flame retardant solution saturation sample which makes put out Hazard Class II which is a low toxicity relatively.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2995-3000
• /
• 2008

Understanding of the impinging behavior of an electrically charged spray is essential in determining appropriate operating conditions for electro-spraying of paints, surface coating materials and insecticides. In the present work, the wall impact behavior of an electrically charged drop has been investigated and compared with that of a neutral drop experimentally. The critical Sommerfeld number representing the spread-splash boundary for the charged drop impacting on the dielectric substrate turned out to be larger compared to that for the neutral drop with the same surface condition. The change of the transition boundary is due to the increase in the surface wettability of the drop on the substrate. However, with the electrically conducting substrates, the charging effect on the transition boundary appeared negligible. This is because the electric discharging time is much shorter than the time required for the flattened drop to reach its maximum extent.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.2
• /
• pp.89-102
• /
• 1993

In this experimental investigation, various plasma-sprayed zirconia contained coatings and a kind of alumina-zirconia coating were studied to gain a better understanding of their tribological behaviour under dry contact condition in a reciprocating motion at temperature of 200℃. Particular attention was made for finding appropriate coatings in cylinder liner/piston ring application with an emphasis on the antiwear property. In order to identify the wear mechanism, SEM(Scanning Electron Microscope), optical micrograph, and roughness tester were used. Alumina-zirconia and 8% yttria-zirconia were found to be most appropriate for the application to the cylinder liner/piston ring and, especially, alumina-zirconia exhibited highest wear-resistance and also showed good friction characteristics. Wear mechanisms of ceramic coatings identified.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.1-7
• /
• 2020

In orchard or crop-growing environments, pesticides are sprayed using various nozzles to prevent pests and improve productivity. Nozzles currently in use are restricted for use in multi-purpose environments, thus, it is necessary to develop new nozzles. In this study, new two-phase nozzles are proposed to improve the performance of the nozzle (flow rate, spray angle, spray particle size). The performance of the two-phase nozzles are predicted through the CFD analysis and the performance of the nozzles is compared with the experiment. The experimental results showed that the proposed two-phase nozzles are available at relatively low operating pressure condition and are capable of extensive spray particle size control. Thus, the proposed nozzles are expected to be available in various orchard environments.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.3
• /
• pp.259-264
• /
• 1995

This study was carried out to find cultivation condition of peony in Euiseong district from 1994 to 1995. 1. Age distribution in cultivation of peony was from 30's to 50's and cultivated years was mainly from 5 years to 10 years, but there was more than 15 years 2. Cultivating area per house hold were 1300 pyeong average, there were moderate $400{\sim]1000$ pyeong and also those are occupied 22.6% more than 2000 pyeong. 3. The mothods of transplanting in Euiseong peony which Euiseong district was mostly divided peony but Yeongchen district used seedling stock. No. of sprout was mostly $3{\sim}4$ and planting time was mainly from Mid to Late of October. 4. The percentage of sterilization of soil and seedling stock was 77. 4%, in mulching by vinyl in tran­splanting 64. 5% in black vinyl and 25. 8% in white one. 5. Number of plant in peony planting was $3000{\sim}4000$ plant per l0a even more there was more than 8000 plant. 6. Chemical spraying time in peony field was 2 time in $1{\sim}2$ years cultivating, and $3{\sim}4$ time in $3{\sim}4$ years one. 7. Condition of fertilizer application in peony field was 40% in non-application, but $56.7{\sim}76.7%$ in 2 year to 3 years, and the time of fertilizer was mainly 3 time. 8. Drying time peony after havesting was from 12 to 24 hours by briquet stove and 24 hours by ma­chine of hot wind, also dry method of peony was mixed briquet stove and hot wind machine.

• Korean Journal of Rural Living Science
• /
• v.10 no.1
• /
• pp.21-32
• /
• 1999

To investigate the status of farmers health management for health promotion, and for checking the effect of village health care center during 1 year, 746 subjects were selected with cluster method in 8 provinces of Korea. The most frequent group was 40th of age (39%) : elementary school graduates (32%) The self-conscious of health status tested with CMI (Cornell Medical Index) questionnaire, the subjects in the village of health care center had lower health status than those of conventional village. The farmers living in the village with health care center had longer agricultural work (p＜0.05) and more frequency of spraying pesticides in the fields. The subjects of living the village of health care center were frequently exercise (34%) with health appliance use methods (30%), but the duration time of exercise was similar, Dietary habits and agricultural work condition were similar between two groups. For the fatigue recovery, steeping and bathing were most favorite methods, but exercise was lowest. It was significantly different between 2 groups the fatigue recovering methods, the subjects of village with health care center were more doing exercise (p＜0.01), less sleeping (p＜0.01) than those of conventional village. The working condition of self-estimated of farmers was not good, only 8.7% was thought pleasant condition. Of the various health factors, exercise, nutrition, and working situation would be more important. Considering on farmers exercise, it was very weak point for health management. The foundation and leading of the Farmers health care center was encouraged to farmers. For more effective operations, the experts education, easy and funny exercise program, and health promotion committee for administrators would be needed. The better systemic and continuous exercise programs should develop for associating livelihood. Funding for this project provided by the ministry of health and welfare of Korea.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.149-155
• /
• 2004

On this study, a multipurpose operating system was developed to adjust a configuration of a moving path which have no connection with a form of greenhouse. To being performance the multipurpose working system, we have experienced growth quality on the plants in greenhouse. Some of the results are as follows. While watering by the hand spray. the condition of plant was generally no good. It was shown that plant height and leaf area were all high without wind during watering by the automatic spray. The effect to retrain a plant growth was high as a ventilation was strong. The diameter of a plant stem was small without ventilation condition during watering 3 times by automatic spray. The number of leaf was relatively large during 3 times by automatic spray compared to 2 times by automatic spray or hand spray. Growth of plant was fast as the times of spray were large.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.350-357
• /
• 2014

We studied on pesticide residue and pest control effect when using various types of sprayers on paprika cultivation. Additionally, a test was conducted to optimize chemical content per unit area in condition of optimum pest control. Two types of sprayer were tested (three times) on paprika cultivation which was divided into seven sections. Blind spots were also examined using a water sensitive paper when spraying chemical pesticide, remote controlled sprayer were confirmed to be not effective in terms of its spraying capacity. However, a U-shaped sprayer was confirmed that it sprayed enough on all the parts of a plant in green house including the blind spots. Additionally, it does not exceed the minimum residue limits on the all parts of pesticides residue conditions. When using remote controlled sprayer, water sensitive paper were changed to blue color (82.5% and 81.2%) in terms of controlling Bemisia tabaci and Aphis gossypii based on the two spraying manners. 53.0% and 42.6% of control effect were shown on the fair parts of the plants. However, on the poor parts on which pesticides were not well-sprayed, thus, not-remained, more number of pests increased. Meanwhile, on farming that only one type of pesticide has been used, resistance pests present with very low control effect, even though sufficient amount of pesticide was well-sprayed. On the test of the optimum amount of spraying per a unit area, which shows no differences in the two cases of using 5L and 2.5L of chemical pesticides on 9 plants of paprika that has 81.8% and 84.5% control effect, respectively.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.525-530
• /
• 2001

As a part of efforts to examine feasibility of warm forging near-net-shape process for non-heat-treated steel to replace quenched and tempered S45C steel, the optimized process condition has been determined to be $820^{\circ}C$ for heating, 10/sec for strain rate of forging and approximately 250MPa for flow stress from observed results such as the $A_{3}$ transformation temperature of about $790^{\circ}C$, the fully dynamic recrystallized behavior between $800^{\circ}C\;and\;850^{\circ}C$ when compressed up to 63% engineering strain at 10/sec strain rate, and the high temperature microsturctural stability. Also, controlled cooling rate of $6.3^{\circ}C/sec$ by water-spraying at a rate of $0.10cc/sec-cm^{2}$ for 60seconds followed by air-cooling right after forging process has been considered in this study as a feasible approach based on examination of the microsturcture of mixed ${\alpha}-ferrite$ and pearlite, the hardness and tensile properties meeting specification, and the reduced total cooling time to room temperature. Successive works would be carried out for the impact strength, machinalility, and forgeability at this process in the near future.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.1
• /
• pp.125-134
• /
• 2003

The present paper is concerned to the thermal analysis during the cool-down period of 138,000 m$^3$class GTT MARK-III membrane type LNG carrier servicing with LNG from the Middle East to Korea. It is the cool-down period that cools the insulation wall and the gas in LNG tank to avoid the thermal shock as the start of loading of -162$^{\circ}C$ LNG. For six hours of the standard cool-down period, the temperature of NG falls down from -4$0^{\circ}C$ to -13$0^{\circ}C$ and especially the mean temperature of the 1st barrier in the top side insulation wall falls down from -38.38$^{\circ}C$ to -122.42$^{\circ}C$ in case of IMO design condition. By the 3-D numerical calculation about the cargo tank and the cofferdam, the temperature variation in hulls and insulations is precisely predicted in this paper. And the mean temperature variation of gas is calculated as the function of the spraying rate by the heat balance model during the cool-down period.