• Korean journal of applied entomology
• /
• v.22 no.2 s.55
• /
• pp.138-146
• /
• 1983

With the increase of pesticide consumption, not only pesticide handling population would grow greater but also the chances to be exposed to the pesticides would be also increased. Thus, safe use and handling of the pesticides are becoming more important and serious in these days. The pesticides are well known to most pepole, however there are very limited number of persons who have correct understanding of chamicals. Intoxication cases caused by pesticides have been reported very rarely through the mess media, even they were lack of scientific evidences. In this paper, problems related to pesticide manufacture, transportation, storage, sprays, and residues and their countermeasures were discussed in connection with public health and enviromental aspects. Acute intoxication cases by pesticide handling might be caused accidently either through manufacture, marketing, transportation, or spraying. Safety aspects of workers in manufacturing plants include not only exposure to toxic chemicals, but also posibilities of of explosion and brought about by pesticides and their diluents. The problems of water pollution by waste chemicals from the manufacturing factories were discussed. Packing and loading methods of pesticides for transportation are considered in safety scheme and discussions are given in association with traffic accidents. With regard to warehouse, the pesticide storage, location structure, keepers, and standing materials for emergency are concerned with safety aspects. Concerning the spraying of chemicals, there are some problems to be discussed about clothes, spray equipment, wind direction, spray period, and spray workers condition. After the spray, treatment of used containers, remainder of Pesticides, and spray tools are also discussed. For the dissolutions of problems on public health and environmental danger arising from pesticide residues, there are two legal sanctions; 'Pesticide Tolerances' and 'Pesticide Safe Use Standards'. These regulations are legally effective, however, some problems still remain in practices to implement the acts properly, because these provisions are followed by the far mers mostly. With these regards, most problems are concerned with various sectors and persons, affecting public health and environment from the producers to the end users and consumers. As a whole persons concerned with pesticides, every possible effort has to be assembled to protect hazards from the chemicals. For the foremost place, special training and education are required for managing groups; such as factory managers and agricultural extension workers who are responsible for training the factory workers and farmers. The education is the only way to solve the hazard problems caused by the pesticides.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.377-384
• /
• 2006

This study was conducted to investigate the effects of chemical application and amout of soil moisture on low temperature stress of cucumber seedling under the greenhouse conditions. When chilling treatments ($2^{\circ}C$) were begun at 07:00AM, survival rates of seedlings of two conditions; -0.3 bar and -5.5 bar were 28.3% and 83.3% respectively. But when chilling treatments were begun at 6:00PM - even the soil moisture condition was -0.3 bar - the survival rate was above the 87%. When reducing the soil moisture from -0.3 bar to -9.0 bar, ABA content in leaf was inc.eased by 6.5fo1d. Spraying of abscisc acid (ABA) before or after the chilling significantly increased the survival rates of seedlings, decreased the amounts of leaking electrolytes and prevented the yield reductions. ABA application on the soil before the chilling appeared to be more effective than the application after the chilling with foliar spray. Spraying of ABA ($10^{-5}M$), urea (0.2%) or $KH_2PO_4$ was effective in counteracting the low temperature, which causes growth deterioration and yield reduction in cucumbers.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.38-38
• /
• 2017

Water stress obstructs rice growth mainly by oxidative damage in biological cells to cause a reduction of leaf photosynthesis and evapotranspiration processes. In this study, exogenous application of vanillic acid (VA) and p-hydroxybenzoic acid (PHBA) to improve drought tolerance of two Oryza sativa cultivars, Q2 and Q8 was tested. The drought evaluation based on leaf phenotypes to show that both Q2 and Q8 resulted in remarkable water-stress tolerance induced by leaf spraying pretreatment of mixed solution of $50{\mu}M\;VA+50{\mu}M\;PHBA$. The mixtures of $25{\mu}M\;VA+25{\mu}M\;PHBA$ and $50{\mu}M\;VA+50{\mu}M\;PHBA$ treated on Q2 and Q8 in water deficit condition also indicated that total phenols, total flavonoids, and DPPH radical scavenging activity were significantly greater their controls. In general, the accumulation of individual phenolic acids was increased in exogenous phenolic treatments, as compared with controls. Particularly, Q2 obtained a considerable amount of endogenous PHBA after application of $50{\mu}M\;VA$, $25{\mu}M\;VA+25{\mu}M\;PHBA$, and $50{\mu}M\;VA+50{\mu}M\;PHBA$ (0.18 mg/g DW, 0.71 mg/g DW, and 1.41 mg/g DW, respectively); and a negligible content of VA (0.003 mg/g DW) appeared uniquely in the treatment of $50{\mu}M\;VA$. Similarly, Q8 also absorbed a significant quantity of PHBA in $50{\mu}M\;PHBA$, $25{\mu}M\;VA+25{\mu}M\;PHBA$, and $50{\mu}M\;VA+50{\mu}M\;PHBA$ treatments (0.15 mg/g DW, 0.15 mg/g DW, and 0.22 mg/g DW, respectively). In addition, the spraying $50{\mu}M\;PHBA$ and $25{\mu}M\;VA+25{\mu}M\;PHBA$ on Q8 leaves induced similar amount of drought tolerance of Q2 and Q8 were improved, paralleled with the increased amounts of endogenous phenolics revealed that VA and PHBA played an important role to enhance drought tolerance in rice.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.33-33
• /
• 2017

Water stress obstructs rice growth mainly by oxidative damage in biological cells to cause a reduction of leaf photosynthesis and evapotranspiration processes. In this study, exogenous application of vanillic acid (VA) and p-hydroxybenzoic acid (PHBA) to improve drought tolerance of two Oryza sativa cultivars, Q2 and Q8 was tested. The drought evaluation based on leaf phenotypes to show that both Q2 and Q8 resulted in remarkable water-stress tolerance induced by leaf spraying pretreatment of mixed solution of $50{\mu}M\;VA+50{\mu}M\;PHBA$. The mixtures of $25{\mu}M\;VA+25{\mu}M\;PHBA$ and $50{\mu}M\;VA+50{\mu}M\;PHBA$ treated on Q2 and Q8 in water deficit condition also indicated that total phenols, total flavonoids, and DPPH radical scavenging activity were significantly greater their controls. In general, the accumulation of individual phenolic acids was increased in exogenous phenolic treatments, as compared with controls. Particularly, Q2 obtained a considerable amount of endogenous PHBA after application of $50{\mu}M\;VA$, $25{\mu}M\;VA+25{\mu}M\;PHBA$, and $50{\mu}M\;VA+50{\mu}M\;PHBA$ (0.18 mg/g DW, 0.71 mg/g DW, and 1.41 mg/g DW, respectively); and a negligible content of VA (0.003 mg/g DW) appeared uniquely in the treatment of $50{\mu}M\;VA$. Similarly, Q8 also absorbed a significant quantity of PHBA in $50{\mu}M\;PHBA$, $25{\mu}M\;VA+25{\mu}M\;PHBA$, and $50{\mu}M\;VA+50{\mu}M\;PHBA$ treatments (0.15 mg/g DW, 0.15 mg/g DW, and 0.22 mg/g DW, respectively). In addition, the spraying $50{\mu}M\;PHBA$ and $25{\mu}M\;VA+25{\mu}M\;PHBA$ on Q8 leaves induced similar amount of VA (0.04 mg/g DW). Meanwhile, there were no trace of VA and PHBA found in controls. The levels of drought tolerance of Q2 and Q8 were improved, paralleled with the increased amounts of endogenous phenolics revealed that VA and PHBA played an important role to enhance drought tolerance in rice.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.3
• /
• pp.209-217
• /
• 2019

EMP (Electromagnetic Pulse) usually means High Power Electromagnetic Wave (HPEM). In the case of the shielding plate against the EMP, there is a possibility of deterioration of the electromagnetic wave shielding performance due to the skill of the constructor, bad construction, deformation of the shielding plate at the connection portion (joint portion). The inefficient use of space due to the separation distance is also pointed out as a problem. Therefore, this study aims to derive the optimum electromagnetic shielding condition by applying ATMSM to concrete as a part of securing electromagnetic wave shielding performance with reflection loss against concrete wall. Experimental parameters included concrete wall thickness and application of Zn-Al ATMSM. For the concrete wall, the wall thickness was 100 to 300mm, which is generally applied, and experimental parameters were set for the application of Zn-Al metal spraying method to evaluate electromagnetic shielding performance. Experimental results showed that as the thickness increases, the electromagnetic shielding performance increases due to the increase of absorption loss. In addition, after the application of Zn-Al ATMSM, the average shielding performance increased by 56.68 dB on average, which is considered to be increased by the reflection loss of the ATMSM. In addition, it is considered that the shielding performance will be better than that when the conductive mixed material and the ATMSM are simultaneously applied.

• Plant Journal
• /
• v.16 no.1
• /
• pp.34-37
• /
• 2020

The need to improve the performance of the dust collector by increasing the fine dust pollution in Korea is eminent. In this study, electrostatic spray wet electrostatic precipitator is used to remove Particulate Matter (PM). In order to enter the Cone-jet mode, which is the most stable spray mode among the various modes of electrostatic spraying, an appropriate voltage-flow condition must be satisfied, and a voltage-flow interval enabling this can be expressed as Stability Island. The voltage at which the conduit mode starts in the Stability Island section is referred to as the electrostatic spray minimum voltage (Onset Voltage). However, the conventional electrostatic spray is uses a very low flowrate, at most few millilitres per minute. The use of much higher flowrates has introduced different patterns of electrospray modes. In this study, the different spray modes will be studied in detail.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.126-135
• /
• 1997

$H_2/O_2$ 비에 따른 Hybrid HVOF 용사된 $Cr_3C_2$-7wt%(NiCr) 용사층의 특성 및 산화거동 This study was performed to investigate the influence of fuel/oxygen ratio (F/O=3.2, 3.0, 2.8) on the characteristics and the oxidation behavior of the hybrid-HVOF sprayed $Cr_3C_2$-7wt%NiCr coatings. Decomposition and the oxidation of the $Cr_3C_2$was occured during spraying. The degree of transformation from $Cr_3C_2$to $Cr_7C_3$ was increased with decreasing the F/O ratio. The microstructural differences of the as sprayed coating with F/O ratio can not be distinguished, However, large pores were diminished and then the coatings became dense by heat treatment. Microhardness of the as-sprayed specimen which sprayed with F/O=3.0 condition was hightest ($Hv_{300}$=1140) and the hardness was increased to 1500 after heat treatment at $600^{\circ}C$ for 50hrs in air. It was supposed that hardness was increased due to the formation of $Cr_2O_3$ within $Cr_3C_2$/$Cr_7C_3$matrix and the densification of coating layer during heat treatment. Apparent activation energy for oxidation was varied from 21.2 kcal$mol^{-1}K^{-1}$ to 23.8 kcal$mol^{-1}K^{-1}$ with respect to the F/O ratio. The surface morphology was changed to porous and oxide chusters were grown after oxidation $1000^{\circ}C$ for 50 hours by the aggressive evolution of gas phase ($CrO_3$ and$CO_2$). The oxide cluster was composed of Ni and Cr.

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.467-475
• /
• 2011

Aerial spraying technology using a small unmanned helicopter is an efficient and practical tool to achieve stable agricultural production to improve the working condition. An attitude controller for the agricultural helicopter would be helpful to aerial application operator. In order to construct the flight controller, a state space model of the helicopter should be identified using a dynamic analysis program, such as CIFER$^{(R)}$. To obtain the state space a model of the helicopter, frequency-sweep flight tests were performed and time history data were acquired using a custom-built stick position transmitter. Four elements of stick commands were accessed for the collective pitch (heave), aileron (roll), elevator (pitch), rudder (yaw) maneuvers. The test results showed that rudder stick position signal was highly linear with rudder input channel signal of the receiver; however, collective pitch stick position signal was exponentially manipulated for the convenience of control stick handling. The acquired stick position and flight dynamic data during sweep tests would be analyzed in the followed study.

• Biomedical Science Letters
• /
• v.22 no.4
• /
• pp.199-206
• /
• 2016

Pesticides are widely used to prevent loss of agricultural production but extensive exposure can induce health problems to pesticide operators. This study was performed to evaluate the health risk of highly produced pesticides used in fruit growing farm land by comparison of estimated exposure level with AOEL using KO-POEM program. AOEL was driven based on NOAEL of each pesticide evaluated by JMPR, EFSA or KRDA. In calculation of exposure level, types of formulation, dilution factors, spraying duration and motor type and exposure protection device were allocated according to actual condition of use. Dermal absorption rate was differently applied among EFSA default values (25% or 75%), general default value (10%) or real test result values to know the plausibility of default values and safety of pesticide to operators in outline. Twenty pesticide ingredients (fungicides and insecticides) were produced more than 30 tons per year, which were mancozeb, chlorothalonil, imidaclopirid and etc in order. Dermal absorption rates obtained from studies were various from 0.07 to 81% but mostly under 10%. The estimated exposure levels showed big differences more than 10 times higher when using EFSA default rate and up to 5 times higher when using general rate of 10% comparing using rates of test results. Mancozeb, chlorthalonil, diazinon and chlorpyrifos presented still higher exposure level than AOEL even when using test absorption rate from study, which suggests that re-evaluation of AOEL or dermal exposure absorption rate or strict management are required for health protection of operators who use those four pesticides in farm land.

• Journal of Biosystems Engineering
• /
• v.31 no.4 s.117
• /
• pp.342-348
• /
• 2006

Aerial application using an unmanned agricultural helicopter became necessary for both labor saving and timely spraying. In the previous paper, a rotor system was developed and lift capability was evaluated. The experimental results were compared with simulated predictions using the CFD-ACE program. From the simulation, the relative velocity on the top surface of the blade airfoil increased, resulting in the pressure drop. The CFD analyses were revealed that a drag resistance on the leading edge of the airfoil, a wake at the trailing edge, and a positive pressure underneath the bottom surface were observed. As the results of the simulation, total lifts of 56.8, 74.4 and $95.0kg_f$ were obtained at the 6, 8 and $10^{\circ}$ of AAT (angle of attack), respectively. The simulation results agreed reasonably up to $10^{\circ}$ of AAT. However, at a greater AAT $(<12^{\circ})$ the simulated total lift continuously increased to $105kg_f$, comparing with a decreasing experimental total lift due to the lack of engine power. At a stiff angle of $18^{\circ}$ AAT, a wake was observed at the trailing edge of the airfoil. A rated operating condition determined from the previous paper was also verified through the simulation.