• Implantology
• /
• v.22 no.4
• /
• pp.210-218
• /
• 2018

Purpose: The purpose of this study was to investigate the validity and reproducibility of a method based on cone-beam computed tomography (CBCT) technology for the visualization and measurement of gingival soft-tissue dimensions. Material and Methods: A total of 66 selected points in soft-tissue of the ex vivo head of an adult pig were investigated in this study. For the measurement of radiographic thickness (RT), wet soft-tissue surfaces were lightly covered with barium sulfate powder using a powder spray. CBCT was taken and DICOM files were assessed for soft-tissue thickness measurement at reference points. A periodontal probe and a rubber stop were used for the measurement of trans-gingival probing thickness (TPT). After flap elevation, actual thickness of soft-tissue (actual thickness, AT) was measured. Correlation analysis and intraclass correlation coefficients analysis (ICC) were performed for AT, TPT, and RT. Results: All variables were distributed normally. Strong significant correlations of AT with RT and TPT values were found. The two ICC values between TPT vs. AT and RT vs. AT differed significantly. Conclusion: Our results indicated that correlation of RT was stronger than that of TPT with AT. We concluded that soft tissue measurement with CBCT could be a reliable method, compared to the trans-gingival probing measurement method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.3
• /
• pp.191-196
• /
• 2005

Fusarium head blight (FHB) is a severe disease problem that affects the quality and yield of barley grain. The evaluation of FHB resistance is difficult because environmental conditions greatly influence FHB infection and development. The objectives of this study were to: 1) establish an efficient screening method for selecting resistant barley to FHB, 2) compare FHB severity between the cut-spike method and pot-plant method for development of mass screening, and 3) estimate FHB resistance for barley germplasms. Barley cultivars and lines were evaluated for reaction to FHB in controlled-greenhouse condition. Spikes were spray-inoculated with a suspension $(5.0\times10^5\;macroconidia\;mL^{-1})$ of Fusarium graminearum SCK-O4 strain, and then kept in a greenhouse at $18-25^{\circ}C$ with $80-100\%$ relative humidity. Inoculation were employed at 3 different heading growth stages (heading date, three days after heading, and five days after heading). The inoculation was performed in 2 consecutive days in order to avoid escapes. The inoculated plants were maintained in the greenhouse at 4 different free moisture periods (1, 3, 5, and 7 days). The percentage of FHB severity was scored from 0 to 9 according to the rate of infected kernels per spike, and three spikes were evaluated per replication with 3 replicates. There were significant differences of FHB severity depending on the different free moisture periods, but not by the inoculation at different heading stages. The optimum evaluation point of FHB severity in the greenhouse condition was on the 7th day under free moisture condition after inoculation at the heading date. Infection level in cut-spike method highly correlated with that in pot-plant method. This suggested that cut-spike method is useful in evaluating of FHB resistance in barley. Six cultivars, such as Jinkwang, Buheung, Atahualpha 92, Chevron-b, Gobernadora-d, and MNBrite-c, were selected as resistant varieties to FHB. Correlation coefficient for the FHB severity evaluated by the pot-plant method between two seasons was 0.794, indicating the stability and accuracy of the screening method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.607-614
• /
• 2013

Nowadays, automotive manufacturers have developed various technologies to improve fuel economy and reduce harmful emissions. The ultra-lean direct injection engine is a promising technology because it has the advantage of improving thermal efficiency through the deliberate control of fuel and ignition. This study aims to investigate the development of a spray-guided-type lean-burn LPG direct injection engine through the redesign of the combustion system. This engine uses a central-injection-type cylinder head in which the injector is installed adjacent to the spark plug. Fuel consumption and combustion stability were estimated depending on the ignition timing and injection timing at various air-fuel ratios. The optimal injection timing and ignition timing were based on the best fuel consumption and combustion stability.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.64-70
• /
• 2008

Temperatures of engine head and liner depend on many factors such as spray and combustion process, coolant passage flow and engine related structures. To estimate the temperature distribution of engine structure, multi-dimensional computational fluid dynamics (CFD) codes have been mainly adopted. In this case, it is of great importance to obtain the realistic wall temperature distribution of entire engine structure. In the present work, a CFD-FEM coupling methodology was presented to address this demand. This approach was applied to a real large-size marine diesel engine. CFD combustion and coolant flow simulations were coupled to FEM temperature analysis. Wall heat flux and wall temperature data were interfaced between combustion simulation and solid component temperature analysis via translator by a commercial CFD package named FIRE by AVL. Heat transfer coefficient and surface temperature data were exchanged and mapped between coolant flow simulation and FEM temperature analysis. Results indicate that there exists the optimum cell thickness near combustion chamber wall to reasonably predict the wall heat flux during combustion period. The present study also shows that the effect of cell refining on predicting in-cylinder pressure during combustion is negligible. Hence, the basic guidance on obtaining the wall heat flux needed for the reasonable CFD-FEM coupling analysis has been established. It is expected that this coupling methodology is a robust tool for practical engine design and can be applied to further assessment of the temperature distribution of other engine components.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.1
• /
• pp.36-44
• /
• 2012

Multi-injector rocket engine using high-concentrated hydrogen peroxide and kerosene was designed and manufactured. Design requirements of a rocket engine were determined and main geometrical parameters of rocket engine were determined on the basis of fundament. Six coaxial swirl injectors were mounted on the multi-injector engine. Flow analysis in the hydrogen peroxide manifold was performed to minimize stagnation and recirculation zones. Finally, the optimized hydrogen peroxide manifold was manufactured and cold flow test was carried out to confirm mass flow rate per uni-element, spray pattern and atomization characteristics. The results of cold flow test showed that the mixing head design process was successful and enough to use as a essential database for the development of a full-scale engine.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.69-75
• /
• 2014

Recently Amore pacific rack-type warehouse fire broke out and argue an urgent improvement of fire protection design code including automatic sprinkler and detection design. Various type of commodities have their unique fire characteristics from fire spread rate and heat lease rate and fire hazard depends on storage height, rack arrangement, aisle width, fire load etc. With increasing ceiling height for more storage space prevent effective water spray of sprinkler head, also delays detection time causes failure of early suppression. To achieve fire protection code performance of this occupancy, Major code articles relating to a classification of commodity, sprinkler system installation, detection and fire fighting are reviewed and suggested based on fire case analysis, code review between country and field survey.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.137-140
• /
• 2009

A new spary chrysanthemum(Dendranthema grandiflorum) cultivar 'Noble Wine' was developed from a cross between 'SL03-01' and 'Artist Pink' by selection of seedlings and lines at the Flower Research Institute, Gyeongnam Agricultural Research and Extention Services(ARES) from 2003 to 2007. Its characteristics were investigated three times from 2005 to 2007 under condition of forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Noble Wine' was October 26th, and yearround production was possible by day length treatment. Its capitulum was 5.4 cm in diameter, and had 21.6 ray florets and 28.5 head per stem in autumn. Its ray floret was red-purple with green central zone. 'Noble Wine' was about 45 days in spring, and 'Noble Wine' showed the vase life of 21.3 days in autumn. This cultivar was registered for a commercialization in 2007.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.229-233
• /
• 2008

A new spary chrysanthemum(Dendranthema grandiflorum) cultivar 'Moulin Rouge' was developed from a cross between 'Delmont' and 'Anjela' by selections of seedlings and lines at the Flower Research Institute, Gyeongnam Agricultural Research and Extension Services(ARES) from 2002 to 2006. Its characteristics were investigated three times from 2004 to 2006 under condition of forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Moulin Rouge' was October 24th, and year-round production was possible by day length treatment. Its capitulum was 5.3 cm in diameter, and had 22.9 ray florets and 12.2 head per stem in autumn. Its ray floret was bi-color(yellow/orange) with green central zone. 'Moulin Rouge' was about 55 days to flower in spring, and showed the vase life of 21.7 days in autumn. This cultivar was registered for a commercialization in 2007.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.200-204
• /
• 2008

A new spary chrysanthemum(Dendranthema grandiflorum) cultivar 'Serapina' was developed from a cross between 'Relanse' and 'Yen' by selection of seedlings and lines at the Flower Research Institute, Gyeongnam Agricultural Research and Extention Services(ARES) from 2002 to 2006. Its characteristics were investigated three times from 2004 to 2006 under condition of forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Serapina' was October 23th, and year-round production was possible by day length treatment. Its capitulum was 2.8cm in diameter, and had 43.4 ray florets and 28.9 head per stem in autumn. Its ray floret was yellow with green central zone. To flower in the short day condition, for 'Serapina' was about 46 days in spring, and 'Serapina' showed the vase life of 21.7 days in autumn. This cultivar was registered for a commercialization in 2007.

• 재활복지
• /
• v.21 no.4
• /
• pp.59-75
• /
• 2017

The purpose of this study was to analyze sports injuries in athletes with disabilities during the 2015 National Games in Korea. We conducted a survey to assess sport injuries in 171 male athletes with disabilities who participated in this study. The shoulder was most frequently injured, followed by the fingers and low back. Contusions were the most common type of injury, and were usually caused by collisions with teammates or contact with equipment. Injuries often occur during enthusiastic play in both competition and practice sessions. Injured athletes are emergently treated with medicated spray and patch application by the head coach. Warm-up and cool-down exercises are recommended to prevent injury, and physical therapy is effective after an injury occurs. Based on these findings, an injury prevention training program and athletic trainers should be provided for athletes with disabilities to ensure appropriate care and rehabilitation.