• 대한건축학회논문집:구조계
• /
• 제36권1호
• /
• pp.147-154
• /
• 2020

The exterior finishing of reinforced concrete buildings is one of the important factors to prevent durability and prevent natural environment or disaster such as temperature, snow, wind, rain from the outside as well as external design of buildings. Finishing methods can be divided into wet and dry methods. The wet method using paint is relatively easy to construct, but it requires repair and reinforcement every 1 to 5 years and requires a lot of LCC for maintenance. Finishing method using panel has good durability, but it is difficult to install and expensive. Therefore, in this paper, we evaluate the bond strength for the application of the metal spray method in order to overcome the problems of existing methods. Experimental results show that the sandblast + surface roughness agent(S-R(Y)) has a roughness of 41.16 ㎛ and the bond strength is about 3.19 MPa, which is the highest bond strength. In addition, the grinding + surface roughness agent(G-R(Y)) application showed roughness of about 36.59 ㎛ and secured the bond strength performance of 2.94 MPa.

• Mycobiology
• /
• 제39권1호
• /
• pp.7-11
• /
• 2011

Shimizuomyces paradoxus showed no inhibitory effect against plant pathogen fungi, such as Fusarium oxysporum f. sp. lycopersici and Alternaria solani. The S. paradoxus culture filtrate showed higher seed germination and seedling growth rates in canola than distilled water and potato-dextrose broth. A conidial suspension of $1.0{\times}10^4/mL$ resulted in the highest growth stimulating effects on total plant length, and fresh and dry weight of shoots and roots in cucumber, when compared to the highest suspension concentration. Total plant length and shoot weight increased with the foliar spray treatment, and root length and root weight increased by simultaneous treatments of soil drenching and foliar spray in cucumber. Lower concentrations of the S. paradoxus conidial suspension increased the harvest of tomato fruit.

• 한국인쇄학회지
• /
• 제26권1호
• /
• pp.73-85
• /
• 2008

We have manufactured a photoresist which has excellent dispersity and good applying property due to 330cps of viscosity for environment-friendly and economical maskless screen plate making. And the photoresist applied on the screen stretched was exposed without mask by beam projector with CRT light source. Then it was developed by air spray with $1.7kgf/cm^2$ of injection pressure. The pencil hardness and solvent resistance of curing photoresist film were worse than those of conventional photoresist film and the maximum resolution of line image formed by maskless screen plate making was 0.5 mm since the exposure system for maskless plate making has weak light intensity and the diffusion of light. But we could obtain maskless screen plate which has sharp edges of line image and confirm a possibility of dry development process by air spray method.

• 동력기계공학회지
• /
• 제18권5호
• /
• pp.74-79
• /
• 2014

This article aims at investigating the effect of applied load and sliding speed on wear behavior of thermally spraryed STS316 coating. STS316 coatings were fabricated by flame spray process according to optimal parameters on steel substrates. Dry sliding wear tests were performed on STS316 coating using four different applied load as 10, 15, 20 and 25 N and four different sliding speed as 15, 30, 45 and 60 rpm. Wear behavior on worn surface was investigated using scanning electron microscope(SEM) and energy disperive X-ray spectroscopy(EDS). The dominant wear mechanism of STS316 coating under low applied load and sliding speed was oxidation on worn surface. However, under high applied load and sliding speed the principal wear mechanism was abrasion on oxidation film and damage of oxidation film.

• 한국잠사곤충학회지
• /
• 제20권1호
• /
• pp.5-10
• /
• 1978

Kinetin의 엽면살포가 상수의 생장및 생체내 대사에 미치는 영향을 분석 검토하여 얻어진 결과를 요약하면 다음과 같다. 1. 상엽의 생건중, 엽면적. 지조장, 지조경의 증대에 효과가 있었다. 2. 상엽의 엽록소의 함량증대에 효과가 있었다. 3. 상엽의 GOT활성은 촉진시켜 주었으나 GPT활성에는 영향을 주지 않았다. 4. 상엽내 당대사를 촉진시켜 주었다.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.273-279
• /
• 2002

In this study, the WC-10 wt.%Co nanopowders doped by grain growth inhibiter were produced by three different methods based on the spray conversion process. Agglomerated powders with homeogenous distribution of alloying elements and with internal particles of about 100-200 nm in diameter were synthesized. The microstructural changes and sintering behavior of hardmetal compacts were compared with doping method and sintering conditions. The microstructure of hardmetals was very sensitive to doping methods of inhibitor. Nanostructured WC-Co hardmetal powder compacts containing TaC/VC doped by chemical method instead of ball-milling shown superior sintering densification, and the microstructure maintained ultrafine scale with rounded WC particles.

• 동력기계공학회지
• /
• 제15권5호
• /
• pp.77-82
• /
• 2011

SiC particulate reinforced Al matrix composites with different SiC volume fractions were fabricated by thermal spray process. And the dry sliding wear test were performed on these composites using the applied load of 10 N, rotational speed of 30 rpm, radius of rotation 15 mm. Wear tracks on the Al/SiC composites were investigated using scanning electron microscope(SEM) and energy dispersive spectroscopy (EDS). It was observed that wear behavior of Al/SiC composites and formation of MML was changed dramatically according to reinforcement volume fraction.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.282-282
• /
• 1996

The purpose of this study was to prepare the nifedipine dry elixir (NDE) and coated nifedipine dry elixir (CNDE) containing nifedipine ethanol solution for improving the dissolution rate and bioavailability of nifedipine. NDE containing nifedipine and ethanol in wall materials of dextrin was prepared using a spray-dryer and then NDE was coated with eudragit acrylic resin to make CNDE. Shape and size of the NDE and CNDE were monitored by scanning electron micrograph and laser particle size analyzer In vitro dissolution tests were performed in simulated gastric and intestinal fluid. Bioavailability of NDE and CNDE were compared with drug powder suspension and commercial soft capsule after oral administration of the preparations to rats. NDE and CNDE are spherical in shape. Cross-sectional view of dry elixirs indicates the large inter cavity containing ethanolic drug solution in shell. Geometric mean diameter of NDE and CNDE is about 6.64 and 8.70 $\mu\textrm{m}$, respectively. Drug dissolution rate within first 5 min from NDE increased dramatically irrespective of dissolution medium. However, CNDE showed a particularly retarded dissolution rate in pH 1.2 simulated gastric fluid compared with NDE. The bioavailability of nifedipine in the NDE was increased dramatically compared with drug powder suspension. CNDE reduced initial burst-out plasma peak compared with NDE. CNDE as a sustained release delivery system could reduce the initial burst-out plasma peak due to controlling the release rate of nifedipine from NDE and maintain the effective plasma level over a longer period within therapeutic window with enhanced bioavailability of nifedipine.

• 농약과학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2016

농약의 효율적인 방제효과를 얻기 위해서는 적절한 시기에 원하는 작물체의 부위에 균일하게 부착되도록 하는 것이 중요하다. 농약 살포기술(application technology)은 노즐의 형태 및 종류와 같은 미세 조절이 가능한 기계적인 인자가 약효 발현과 작물 잔류성에 영향을 미치는 중요한 요인으로 작용하고 있다. 본 연구에서는 감귤의 더뎅이병에 사용되는 디티아논 액상수화제를 이용하여 감귤 과원에서 사용중인 약제 살포방식 차이에 따른 감귤 잎의 부착량 분포도를 조사하여 살포 방식의 효율성을 비교하였다. 이를 위해 기계식 살포기를 대조구로 하고 노즐 및 살포 방식에 변화를 준 sprinkler 살포시스템 및 speed spray 분사 방법에 대한 감귤잎 부착량을 비교 평가하였다. 시험은 제주도에 위치한 감귤시험장 감귤과원에서 진행하였으며, 감귤잎의 높이 위치별 부착량, 전후면 부착량을 알아보기 위하여 디티아논 43% 액상수화제 1,000배 희석 액을 살포한 후 filter paper와 나뭇잎을 상, 중, 하로 높이로 채취하여 실험에 사용하였다. Speed spray 방식이 engine type spray 방식보다 부착량 및 부착균일성 우수하였고, 모든 살포방식이 잎 뒷면의 부착량을 증가 할 수 있는 방식으로 개선되어야 하며 감귤의 상부 위치의 부착량 평가에서는 마른안개 sprinkler 방식이 가장 우수하였다.

• Journal of Pharmaceutical Investigation
• /
• 제31권2호
• /
• pp.81-87
• /
• 2001

The purpose of this study was to investigate the effect of additives on the powder characteristics of peonja dry elixir. Peonja dry elixirs were prepared with various amounts of dextrin using a spray-dryer, and their powder characteristics such as flow, cohesion and compressibility were evaluated as an angle of repose, cohesion index and compressibility index, respectively. Their powder characteristics were not significantly different from one another, indicating that the hydrophilic dextrin, a base of dry elixir hardly affected their powder characteristics. Peonja dry elixirs were prepared with 10% dextrin and various amounts of additives such as mannitol (hydrophilic excipient), sodium lauryl sulfate (surfactant), colloidal silica (hydrophobic excipient) and HPMC (polymer), respectively, and their angle of repose, cohesion index and compressibility index were measured. The powder characteristics of peonja dry elixirs prepared with mannitol were not significantly different from one another, indicating that the mannitol scarcely improved the powder characteristics of peonja dry elixirs. The angle of repose and cohesion index of peonja dry elixirs significantly decreased with increasing amount of sodium lauryl sulfate to 0.3% followed by no significant changes in them. The cohesion index of peonja dry elixir significantly decreased with increasing amount of colloidal silica. The angle of repose and cohesion index of peonja dry elixir significantly decreased with increasing amount of HPMC to 0.3% followed by an abrupt increase in them. However, the compressibility index of peonja dry elixir significantly increased with increasing amount of HPMC to 0.3% followed by an abrupt decrease in them. Our results suggested that a small amount of sodium lauryl sulfate, colloidal silica and HPMC improved markedly the powder characteristics of peonja dry elixirs due to forming stronger and less hygroscopic shell of peonja dry elixirs. Among the peonja dry elixirs studied, the peonja dry elixir prepared with 0.3% sodium lauryl sulfate and 0.3% HPMC had the lowest angle of repose of $27^{\circ}$ and cohesion index of 37.8%, and the highest compressibility index of 38.7%, respectively. Thus, sodium lauryl sulfate and HPMC appear to be promising additives for peonja dry elixir, if used in adequate amounts.