• 제목/요약/키워드: Spray Control

Search Result 835, Processing Time 0.027 seconds

Effect of oral spray with Lactobacillus on growth performance, intestinal development and microflora population of ducklings

  • Zhang, Qi;Jie, Yuchen;Zhou, Chuli;Wang, Leyun;Huang, Liang;Yang, Lin;Zhu, Yongwen
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.33 no.3
    • /
    • pp.456-464
    • /
    • 2020
  • Objective: The aim of this study is to investigate the effect of oral spray with probiotics on the intestinal development and microflora colonization of hatched ducklings. Methods: In Exp. 1, an one-way factorial design was used to study the antibacterial activity of the probiotics and metabolites on Escherichia coli (E. coli) without antimicrobial resistance. There were four experimental groups including saline as control and Lactobacillus, Bacillus subtilis, combined Lactobacillus and Bacillus subtilis groups. In Exp. 2, 64-day-old ducklings were allotted to 2 treatments with 4 replicated pens. Birds in the control group were fed a basal diet supplemented with Lactobacillus fermentation in the feed whereas birds in the oral spray group were fed the basal diet and administrated Lactobacillus fermentation by oral spray way during the first week. Results: In Exp. 1, the antibacterial activities of probiotics and metabolites on E. coli were determined by the diameter of inhibition zone in order: Lactobacillus>combined Lactobacillus and Bacillus subtilis>Bacillus subtilis. Additionally, compared to E. coli without resistance, E. coli with resistance showed a smaller diameter of inhibition zones. In Exp. 2, compared to control feeding group, oral spray group increased (p<0.05) the final body weight at d 21 and average daily gain for d 1-21 and the absolute weight of the jejunum, ileum and total intestine tract as well as cecum Lactobacillus amount at d 21. Conclusion: Lactobacillus exhibited a lower antibacterial activity on E. coli with resistance than E. coli without resistance. Oral spray with Lactobacillus fermentation during the first week of could improve the intestinal development, morphological structure, and microbial balance to promote growth performance of ducklings from hatch to 21 d of age.

Control of Gray Blight of Tea Plants Using a Biofungicide (미생물제제를 이용한 차나무 겹둥근무늬병의 방제)

  • Kim, Gyoung-Hee;Lim, Myoung-Taek;Hur, Jae-Seoun;Yum, Kyu-Kim;Koh, Young-Jin
    • Research in Plant Disease
    • /
    • v.14 no.1
    • /
    • pp.37-42
    • /
    • 2008
  • Bacillus subtilis BD0310 isolated from tea leaves was used for the development of a biofungicide against Pestitalotiopsis longiseta causing gray blight of tea plants. After mass culture of the antagonistic bacteria, the biofungicide formulated as a suspension concentrate was evaluated for its control efficacy against the gray blight of tea plant in a greenhouse and a tea plantation, respectively. Spray of the biofungicide 2 days before inoculation of P. longiseta inhibited more efficiently the development of gray blight compared with spray of the biofungicide 2 days after inoculation of the pathogen onto the leaves of tea plants in a greenhouse. In the field investigation under application of the biofungicide in 2005 and 2006, control efficiencies increased according to the number of spray of the biofungicide. Control efficiencies of the biofungicide were 52.4%, 66.7%, 71.4% and 85.7% against gray blight in 4 times spray of the biofungicide alone at 7 days interval, 6 times spray of the biofungicide alone at 7 days interval, 2 times alternate spray of biofungicide and chemical fungicide at 7 days interval and 4 times spray of chemical fungicide alone at 7 days interval, respectively. Therefore, the alternate application of the biofungicide and chemical fungicide at 7 days interval can increase the control efficiency with reduction of the amount of chemical fungicides and the number of spray for the control of gray blight of tea plants in the field.

Development of Fungicide Spray Program for the Apples to Be Exported to the United States of America (미국 수출용 사과 재배를 위한 살균제 살포력의 개발)

  • 엄재열;이동혁;이상계
    • Korean Journal Plant Pathology
    • /
    • v.11 no.1
    • /
    • pp.17-29
    • /
    • 1995
  • This study was conducted from 1991 to 1993 to develop a fungicidal spray program for the apples exportable to the United States of America, in which quarantine and pesticide residue in agricultural products are strictly regulated. In 1991, 2 spray schedules were applied to an orchard, in one of which the 7 fungicides registered for apple both in Korea and U.S. were used, and in the other of which the Bordeaux mixture for which the tolerance was exempted in U.S. was used 2 times along with those 7 fungicides. The apple white rot and fruit infection by Alternaria mali were not effectively controlled by the 7 fungicides alone; however, the control efficacy was raised by adding the Bordeaux mixture to the spray schedule. In 1992, 4 spray schedules were applied in which the kinds of fungicides and spray intervals were different one another. The results suggested that an effective spray program can be developed by adopting the Bordeaux mixture for 3 times or adopting the imminoctadine-triacetate which has not tolerance level in U.S. for same times in the vulnerable stage of apple white rot and alternaria blotch. In spite of the high efficacies against major apple diseases, the Bordeaux mixture could not be recommended to the apple growers due to the various defects such as restrictions in compatibility with insecticides and acaricides, troublesomeness in preparation and spray, especially the harmful effect on the finish of Fuji apples. In 1993, a spray program adopting 3 times of imminoctadine-triacetate during the growing season of apple was developed, which not only can effectively control the major apple diseases but also avoid the pesticide residue problems if it was sprayed 2 or 3 times after bagging. On the basis of the 3 years results, a basic fungicide spray program was formulated in which 1~3 times of imminoctadine-triacetate and 1~2 times of bitertanol were adopted in addition of the 7 common fungicides registered in both countries. In the results of application of the spray schedule to the actual farming in the 4 areas of Kyungpook Province in 1994, no noticeable defects were detected at the first year trial. However, this spray program will be continuously evaluated and modified to obtain better control efficacies against major apple diseases.

  • PDF

SPRAY CHARACTERISTICS OF DIRECTLY INJECTED LPG

  • Lee, S.W.;Y. Daisho
    • International Journal of Automotive Technology
    • /
    • v.5 no.4
    • /
    • pp.239-245
    • /
    • 2004
  • It has been recognized that alternative fuels such as Liquid Petroleum Gas (LPG) show less polluting combustion characteristics than diesel fuel. Furthermore, engine performance is expected to be nearly equal to that of the diesel engine if direct-injection stratified-charge combustion of the LPG can be adopted in the spark-ignition engine. However, spray characteristics of LPG are quite different from those of diesel fuel. understanding the spray characteristics of LPG and evaporating processes are very important for developing efficient and low emission LPG engines optimized in fuel injection control and combustion processes. In this study, the LPG spray characteristics and evaporating processes were investigated using the Schlieren and Mie scattering optical system and single-hole injectors in a constant volume chamber. The results show that the mixture moves along the impingement wall that reproduced the piston bowl and reaches in ignition spark plug. LPG spray receives more influence of ambient pressure and temperature significantly than that of n-dodecane spray.

The Method and Apparatus for Photoresist Spray Coating with High Temperature Rotational Chuck (고온 회전 척을 구비한 포토레지스트 Spray Coating 방법 및 장치)

  • Park, Tae-Gyu;Kim, Jun-Tae;Kim, Kook-Jin;Suk, Chang-Gil
    • Proceedings of the KIEE Conference
    • /
    • 2003.10a
    • /
    • pp.42-44
    • /
    • 2003
  • The paper presents the method and apparatus for conformal photoresist spray coating on the 3D structured substrate. The system consists of a high-temperature-rotational chuck, ultrasonic spray nozzle module, angle control module and nozzle moving module. The coating uniformity is acquired by controlling the moving speed of the ultrasonic spray nozzle across the substrate which is rotated constantly. To coat the photoresist conformally the spray angle of the nozzle and the temperature of the substrate are controlled during spray coating. The rotational chuck can be heated up by hot air or $N_2$. The photoresist (AZ1512) has been coated on the 3D structured wafer by spray coating system and the characteristics have been evaluated.

  • PDF

Development of Digital Particle Holographic System for Measurements of the Characteristics of Spray Droplets (분무 액적 특성 계측을 위한 디지털 입자 홀로그래피 시스템의 개발)

  • Yan, Yang;Kang, Bo-Seon
    • Journal of ILASS-Korea
    • /
    • v.15 no.2
    • /
    • pp.53-60
    • /
    • 2010
  • This study presents development of digital particle holographic system and its application to spray field to measure three-dimensional velocities and sizes of spray droplets. A double exposure hologram recording system with synchronization system for time control was established and digital holograms can be recorded in a short time interval. To process recorded holograms, the correlation coefficient method was used for focal plane determination of particles. To remove noises and improve the quality of holograms and reconstructed images, the Wiener filter was adopted. The two-threshold and image segmentation methods were used in binary image transformation. For particle pairing, the match probability method was adopted. The developed system was applied to spray field and three-dimensional velocities and sizes of spray droplets were measured. The measurement results of digital holographic system were compared with those made by laser instruments, PDPA(Phase Doppler Particle Analyzer), which proved the feasibility of in-line digital particle holographic system as a good measurement tool for spray droplets.

DEVELOPMENT OF A CONTROL SYSTEM FOR AN AUTOMATIC ROAD SIGN REMOVING EQUIPMENT USING HIGH PRESSURE WATER-JET (초고압수를 이용한 노면표시 자동제거 장비개발을 위한 제어시스템 및 노면최적조건에 대한 연구)

  • Kwon Soon-Wook;Kim Kyoon-Tai;Han Jae-Goo
    • Korean Journal of Construction Engineering and Management
    • /
    • v.5 no.4 s.20
    • /
    • pp.139-146
    • /
    • 2004
  • Resent removal work for road signs has been labor intensive and required times since it has been done manually using shaving type equipment. While traditional process is conducting, there are traffic jams caused by the passing control, and happened unexpected accidents to workers working at dangerous road circumstance. Besides, in current shaving method, there are high potentialities on the air pollution as well as the explosive accident occurred by using a propane gas. So, as an alternative, we have studied to develop the automatic erasing equipment made up with a high pressure water-jet system and automatic control system, mobile system; Wate-rjet system consists of an intensifier and nozzles to give a high pressure and spray on the sign, and automatic control system is composed of one axis robot using a hydraulic servo actuator controlled by a lever, And as a mobile system, a truck plays an important role for the transport of equipment and the forward movement in a removal process. In this paper, we have analyzed the characteristics of road signs and have investigated current erasing methods in the field. And we have organized and designed automatic erasing equipment, and we have made a basic experiment to find out the optimal spray condition as like the spray distance, spray angle and injection pressure.

Dense Spray Patternation using Optical Tomography

  • Cho, Seongho;Park, Gujeong;Yoon, Youngbin
    • International Journal of Aeronautical and Space Sciences
    • /
    • v.14 no.4
    • /
    • pp.398-407
    • /
    • 2013
  • Optical tomography was used to measure the pattern of spray cross-section. The maximum-likelihood estimation (MLE) algorithm was used to reconstruct the spray cross-section from the measured transmission rate of the spray. A swirl-type injector was used to form an optically dense spray, and the test was carried out in a high-pressure chamber, to control the pressure condition of the test site. Before the experiment, the reliability of the MLE-based reconstruction algorithm was verified, by comparing it with a conventional filtered back projection reconstruction (FBP) method. The MLE algorithm showed superior reconstruction of the image. In the spray patternation experiment, the results of the optical tomography and optical line patternator, which uses Mie scattering signal information, were compared. While measuring the cross-section of optically dense spray, the intensity of the scattering signal had attenuated to an uncorrectable level, which led to incorrect spray pattern measurement by the optical line patternator. However, reliable results were obtained by optical tomography, under the same condition. Finally, the pattern of the optically dense spray was measured at various chamber pressures, of up to 3 MPa. As the chamber pressure increased, the hollow cone-shaped swirl spray shrank, and the attenuation coefficient value of the inner region increased.

Development of Control System of Twin-Fluid Nozzles for Controlling Spraying Rate and Droplet Size (이류체노즐을 이용한 분무량과 분무입경 제어시스템 개발)

  • 이중용;안형철;정창주
    • Journal of Biosystems Engineering
    • /
    • v.25 no.1
    • /
    • pp.11-18
    • /
    • 2000
  • In precision chemical application increment of biological efficacy with less chemical is the virtue. spraying rate and droplet size is closely related to biological efficacy. this study was performed to develope a spray-control-system that could control spraying rate and droplet size independently. Twin-fluid nozzles were selected and tested to certify if the nozzles were suitable for the objective of this study. Characteritics of the nozzles i.e., spraying rte and droplet size change u8nder the changes of spraying pressure and air pressure were statistically modeled. The model had I to 1 matching property between dependent variables and independent variables. Using the property and the model, inverse relationship could be determined between variables. A feedback spray control system was developed and tested with predetermined error of 5 % in pressure. The system showed 4 % error in spraying rate and 9 % error in droplets size. Performance of the system could be upgraded by fine tuning but, in practical sense keeping air pressure in the field sprayer was the bottle neck of commercialization of the spray system.

  • PDF

Study on the Spray Control of Mixed Fuel Using Flash Boiling (감압비등을 이용한 혼합연료의 분무제어에 관한 연구)

  • Myong, Kwang-Jae;Yoon, Jun-Kyu
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.11
    • /
    • pp.1005-1013
    • /
    • 2010
  • This study was conducted to assess the spray control of flash boiling with mixed fuel in consideration of HCCI (Homogeneous Charge Compression Ignition) engine condition. Mixed fuel existing in two phase regions can control the process of mixture formation under low temperature and density by using the spray resulting from flash boiling which is able to induce rapid evaporation of fuel spray as well as the evaporation of high boiling point component. Because HCCI engine injects the fuel early under ambient conditions, it can facilitate the chemical control of ignition combustion and physical control such as breakup and atomization of liquid fuel by flash boiling of mixed fuel which consists of highly ignitable light oil and highly volatile gasoline. This study was conducted by performing video processing after selected composition and molar fraction of the mixed fuel as major parameters and photographed Schlieren image and Mie scattered light corresponding to the flash boiling phenomenon of the fuel spray that was injected inside a constant volume vessel. It was found that flash boiling causes significant changes in the spray structure under relatively low temperature and density. Thus, we analyzed that the flash boiling spray can be used for HCCI combustion by controlling the mixture formation at the early fuel injection timing.