• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.30-35
• /
• 2001

To get higher efficiency of gas turbine, The designer should have more higher turbine inlet temperature (TIT). Today, modem gas turbine having sophisticated cooling scheme has TIT above $1,700^{\circ}C$. In the korea, many gas turbine having TIT above $1,300^{\circ}C$ was imported and being operated, but the gas with high TIT above $1,300^{\circ}C$ in the turbine will give damage to liner of combustor, and blade of turbine and etc. So frequently maintenance for parts enduring high temperature was performed. In this study, the heat transfer analysis of cooling air in the internal cooling channel (network analysis) and temperature analysis of the blade (Finite Element Analysis) in the first stage rotor was conducted for development of the optimal cooling passage design procedure. The results of network analysis and FEM analysis of blade show that the high temperature spot are occured at the leading edge, trailing edge near tip, and platform. so to get more reliable performance of gas turbine, the more efficient cooling method should be applied at the leading edge and tip section. and the thermal barrier coating on the blade surface has important role in cooling blade.

• 한국가구학회지
• /
• 제23권3호
• /
• pp.261-270
• /
• 2012

Nowadays, kitchen are not for the housewives who were independent themselves in the past but for the functional spaces. Kitchen spaces are not only the main function in the residence but also changing spaces which provide the mutual understanding communication between the family members. Although the primary function of the kitchen is food preparation, it is commonly a gathering spot for family and friends, especially if it includes an informal eating area. With so much time spent in the kitchen, and can easily become tired do the decorating scheme. But, for fear of high remodeling costs, it is often unchanged for many years. Surprisingly, there are many changes that can de made to the decorating scheme of a kitchen without either the expense or the inconvenience of remodeling. Between materials on the market, materials for kitchen interior were chosen for this study. Following results came from the materials after combustion. Among boards, MDF showed the highest score in these four categories; residual inflame time, residual glow time, carbonization length, carbonization area. Also, among finishing materials (interior materials), MDF + Poly Coating showed the highest score in those categories. Therefore, it seemed that interior materials need flame retardancy.

• Journal of Welding and Joining
• /
• 제15권5호
• /
• pp.74-83
• /
• 1997

Effect of welding parameters such as current, speed and electrode pressure on the weld quality of tin coated steels for small containers was discussed in this paper. Welding was performed with low frequency wire seam welding system which was loaded with 1.5mm in diameter copper wire electrode. The welding parameters were monitored at the position close to the welding spot so as to minimize the instrumentation error, and the signals were stored into a digital data acquisition system before analysis. Results showed that critical current for sufficient nugget size increased as the base material thickness increased, while the width of the optimum welding range was reduced. The acceptable welding condition derived from this study was found to be effective within the thickness range of $\pm$10% of the nominal (0.25mm) thickness. Tin coating layer was proved not to affect seriously on the weld quality, i.e. strength and formability, since consumable wire electrode was used in this process. Test results also demonstrated that the welding current was thought to be the most effective parameter to form an acceptable weld, while welding speed or electrode pressure exerted less effect on the nugget formation. However, these two parameters played an important role because the former was related to the nugget overlap interval, and the latter, to the formation of expulsion during welding.

• 마이크로전자및패키징학회지
• /
• 제16권4호
• /
• pp.33-39
• /
• 2009

마스크리스 리소그래피(maskless lithography)에 응용하기 위한 마이크로렌즈 어레이(microlens array, MLA)가 석영의 습식 식각과 UV 접착제(UV adhesive)의 코팅을 바탕으로 개발되었다. 제작된 MLA의 초점거리는 ${\sim}45\;{\mu}m$ 정도였으며, 집광되는 광선의 초점은 ${\sim}1\;{\mu}m$로 측정되었다. MLA를 통과하며 초점을 맺은 빔(beam)의 크기 및 세기가 charge coupled device (CCD) 카메라와 빔 프로파일러(beam profiler)를 이용하여 각각 측정되었으며, 일정한 세기의 점들이 초점면에서 고르게 관찰되었다. 초점거리는 코팅된 UV 접착제의 두께에 따라 변화하였으며, UV 접착제의 두께가 두꺼울수록 짧아지는 경향을 보였다. 일반적인 마스크 얼라이너(mask aligner)를 이용한 MLA의 UV 포커싱(UV focusing)이 감광막(photoresist, PR) 상에서 실시되었으며, MLA를 통과한 빛이 감광막 위에 일정하게 집광되었다. 마스크 얼라이너와 MLA 사이의 거리 변화에 따라 감광막에 구현된 패턴 사이즈가 조절 되었다. 고온에서 오랜 시간이 지난 후에도 소자의 특성은 전혀 변함이 없었다.

• 대한토목학회논문집
• /
• 제8권3호
• /
• pp.119-128
• /
• 1988

본 연구의 목적은 불포화 토양내 유기독성물질의 삼계평형분포에 미치는 함수율(0.3~1.255%)과 온도 ($4{\sim}40^{\circ}C$)의 영향을 정량화 하는데 있다. 본 실험에 사용한 토양은 한국토양의 주종을 이루고 있는 마사토이며, 유기독성물질로써는 Dichlolomethane과 1, 1, 1-Trichloloethane을 사용하였다. 토양내 수분이 분포하는 모양에 따른 두가지 가정(가정 1. 토양수분이 토양입자의 표면을 완전히 둘러싸고 있다. 가정 2. 부분적으로 둘러싸고 있다.)에 기초하여 구한 두 모델과 실험결과를 비교하였다. 이 실험의 결과 함수율이 증가함에 따라 $K_{eff}$ 값은 급격히 감소하는 것을 알았다. 또한 온도가 증가함에 따라 $K_{eff}$ 값은 감소하였는데, 함수율이 낮을수록 이러한 온도의 영향은 더욱 크게 나타났다. $K_{eff}$ 값은, 모델II를 이용하여 구한 예측치와 더 잘 일치하였다. 이 결과로부터 토양의 함수율이 매우 낮을 경우, 토양수분은 부분적으로 토양입자를 둘려싸고 있다는 가정이 타당함을 실험적으로 증명할 수 있게 되었다.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.218-224
• /
• 2016

Thermal radiation pastes were prepared by dispersing carbon materials as fillers with a content of 1 weight percent in an acrylic resin. The kind of fillers was as follows; $25{\mu}m$ graphite, $45{\mu}m$ graphite, $15{\mu}m$ carbon nanotube(CNT), a 1:1 mixture of $25{\mu}m$ graphite and $15{\mu}m$ CNT, and a 1:1 mixture of $45{\mu}m$ graphite and $15{\mu}m$ CNT. Thermal emissivity was measured as 0.890 for the samples with graphite only, 0.893 for that with CNT only, and 0.892 for those containing both. After coating prepared pastes on a side of 0.4 mm thick aluminium plate and placing the plate over an opening of a box maintained at $92^{\circ}C$ with the coated side out, the temperatures on the uncoated side of the plates were measured. The samples containing graphite and CNT showed the lowest temperatures. The paste with mixed fillers was coated on the back side of the PCB of an LED module and thermal analysis was carried out using Thermal Transient Tester (T3ster) in a still air box. The thermal resistance of the module with coated PCB was measured as 14.34 K/W whereas that with uncoated PCB was 15.02 K/W. The structure function analysis of T3ster data revealed that the difference between junction and ambient temperatures was $13.8^{\circ}C$ for the coated case and $18.0^{\circ}C$ for the uncoated. From the infrared images of heated LED modules, the hottest-spot temperature of the module with coated PCB was lower than that of the uncoated one for a given period of LED operation.

• 한국입자에어로졸학회지
• /
• 제14권4호
• /
• pp.89-95
• /
• 2018

People's environmental concerns for fine particles in Korea lead to the strong necessity of improving the performance of environmental control systems. Wet electrostatic precipitators (ESPs) are considered as one of the alternatives to overcome the limit of previous dry ESPs, the re-entrainment of collected particles during rapping and back corona problem for high electrical resistivity dusts etc. In this study, a wire-cylindrical ESP with a thin water film has been developed. Particle collection characteristics were compared in the ESP with operations of water film on and off. Particle collection efficiencies at various applied voltages as well as voltage-current curves were almost the same in the ESP with and without a water film. Particle collection performance for PM1.0, PM2.5 and PM10 in the wet ESP with a water film was constantly maintained with operation time even in the high dust loading environment. This results indicate that a uniform water film in our wet ESP was successfully formed with a very thin layer without any dry spot and therefore could continuously clean the collected particles on the inner wall of the ESP without any performance degradation.

• The Plant Pathology Journal
• /
• 제37권6호
• /
• pp.555-565
• /
• 2021

Bacteriophages infecting Acidovorax citrulli, the causal agent of bacterial fruit blotch, have been proven to be effective for the prevention and control of this disease. However, the occurrence of bacteriophage-resistant bacteria is one of hurdles in phage biocontrol and the understanding of phage resistance in this bacterium is an essential step. In this study, we aim to investigate possible phage resistance of A. citrulli and relationship between phage resistance and pathogenicity, and to isolate and characterize the genes involved in these phenomena. A phage-resistant and less-virulent mutant named as AC-17-G1 was isolated among 3,264 A. citrulli Tn5 mutants through serial spot assays and plaque assays followed by pathogenicity test using seed coating method. The mutant has the integrated Tn5 in the middle of a cupin protein gene. This mutant recovered its pathogenicity and phage sensitivity by complementation with corresponding wild-type gene. Site-directed mutation of this gene from wild-type by CRISPR/Cas9 system resulted in the loss of pathogenicity and acquisition of phage resistance. The growth of AC-17-G1 in King's B medium was much less than the wild-type, but the growth turned into normal in the medium supplemented with D-mannose 6-phosphate or D-fructose 6-phosphate indicating the cupin protein functions as a phosphomannos isomerase. Sodium dodecyl sulfa analysis of lipopolysaccharide (LPS) extracted from the mutant was smaller than that from wild-type. All these data suggest that the cupin protein is a phosphomannos isomerase involved in LPS synthesis, and LPS is an important determinant of pathogenicity and phage susceptibility of A. citrulli.

• 공학논문집
• /
• 제3권1호
• /
• pp.189-197
• /
• 1998

생체적합성이 뛰어난 Hydroxyapatite(HAp)를 Wet Chemical Process로 만든 후 Ion Beam Assisted Deposition (IBAD)를 이용하여 Ti-6Al-4V의 표면에 coating 시켰다. 그런후 5ppm, 10ppm, 20ppm, 100ppm의 $AgNO_3$용액으로 HAp의 Ca이온과 Ag이온을 치환시켰다. 본 논문에서는 Ag-HAp로 coating된 Ti-6Al-4V를 만들어 항균효과와 생체적합성을 연구하였다. 먼저 생체 대체재료 이식수술시 감염이 큰 2가지 종류의 bacteria (P. Aeruginosa, S. Epidermidis)로 항균 test를 하였고, 그 결과 20ppm의 $AgNO_3$로 처리한 Ti-6Al-4V에서 우수한 항균성이 관찰되었다. 또한 생체적합성 연구을 위해 osteoblast와 macrophages로 생체적합성 실험을 하여 SEM으로 관찰한 결과, 5ppm과 10ppm의 $AgNO_3$로 처리한 Ti-6Al-4V 에서 좋은 생체적합성을 보였다. HAp의 Ca 이온에 치환된 Ag 이온의 항균원리를 관찰하기 위하여, 가장 일반적인 bacteria인 E. coli를 Ag-HAp로 처리한 후 transmission electron microscope (TEM)으로 관찰하였다. Ag-HAp로 처리한 E. coli에서 cell wall과 cytoplasm이 파괴된 것이 관찰되었고, cytoplasm에서는 검은점이 발견되었다. 이 검은점을 Energy dispersive analysis X-ray (EDAX)로 분석한 결과 미량의 Ag이온이 검출되었다. 이로써 Ag 이온이 효과적으로 Bacteria를 파괴하여 항균효과를 나타내는 것을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권4호
• /
• pp.333-340
• /
• 2010

한반도 남부 일대에서 자생하는 황칠나무(Dendropanax morbifera Lev.) 수액으로부터 추출한 천연 도료인 황칠도료(Korean Dendropanax lacquer)는 예로부터 귀중한 예술품이나 투구, 화살, 활 등의 전쟁도구를 찬란한 황금색으로 도장하는데 사용되어 왔다. 경화 후 황금색의 투명한 도막을 형성하여 우수한 색상특성을 지니고 있을 뿐만 아니라 내후성, 내수성, 내식성 등이 우수하여, 보호도장으로써도 훌륭한 가치를 지니고 있다. 그러나 이러한 많은 장점에도 불구하고, 현대적인 여러 적용분야에 사용되지 못하고 있는 이유는 황칠도료의 생산량이 적고, 이로 인하여 가격이 매우 고가이고, 장시간의 경화시간이 소요되는 문제도 큰 원인으로 작용하고 있다. 한편 황칠 내에 광중합이 가능한 conjugated diene을 포함한 모노머가 있으며, 이러한 모노머는 일광 조사 조건등에 의하여 짧은 시간에 단단하고 황금색을 띠는 도막을 형성할 수 있음이 보고된 바가 있다. 따라서 본 연구에 서는 전통적인 황칠도료의 경화방법을 개선하고 경화속도를 촉진하기 위하여, 열개시제를 도입하여 열경화를 촉진하는 방법과 열개시제 및 광개시제를 동시에 도입하고 이중경화(dual curing)에 의해서 경화속도를 촉진하고자 하였다. 이러한 경화 속도 및 경화 거동은 적외선분광분석기(FT-IR)을 이용하여 -C=C- 이중결합 특성피크의 변화를 관찰하거나, 진자경도계(pendulum hardness tester)를 이용하여 표면 경도의 변화를 관찰함으로써 평가하였다. 또한 강체진자물성측정기(RPT)에 spot UV curing 장비를 도입하여 이중경화에 의한 경화 속도 진을 평가하였다. 본 연구의 결과 열개시제에 의하여 열경화가 촉진될 수 있을 뿐만 아니라, 이중경화에 의하여 경화속도를 향상시킬 수 있음을 확인하였다. 또한 이러한 황칠도료 경화 속도 촉진 방법을 활용하여 전통적인 역에만 사용되어온 황칠도료를 현대적인 여러 적용분야에도 확대하여 사용할 수 있는 가능성을 제시하였다.