• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.298-299
• /
• 2006

This paper analyzes operation sensitivity of a relay, a blind spot of differential protection relaying, and how to protect the blind spot in protective relying of $3{\Phi}$ Y-Delta transformer consisting of three $1{\Phi}$ transformers which Korean pumped storage power plants have been using. Each different protective relayings must be adopted because there are differences between $3{\Phi}$ trans-former and $3{\Phi}$ transformer consisting of three $1{\Phi}$ trans formers. Also, in the system using high resistance grounding for fault current restriction of delta side, protection for delta side faults have to be considered properly.

• Asian Journal of Turfgrass Science
• /
• v.26 no.2
• /
• pp.96-101
• /
• 2012

Dollar spot caused by Sclerotinia homoeocarpa F.T. Benn. is a common and economically important turfgrass disease in South Korea. Fungicides were evaluated for control of dollar spot in creeping bentgrass golf course putting green. Commercial formulations of propiconazole, thiophanate-methyl, chlorothalonil, trifloxystrobin and boscalid were applied to plots of creeping bentgrass, each of the latter four fungicides was tank mixed with propiconazole at the same rates, and applied as treatments. The dollar spot severity in the nontreated plots of field A and B progressed toward peak diseases of 18.3 and 66.7% from 10 or 15 days after inoculation, respectively. Significant differences were detected among control values of the fungicides. Dollar spot control provided by boscalid was significantly greater than the other fungicides which showed low control values in a higher disease condition. No synergistic interactions, except propiconazole + thiophanate-methyl treated plot, were detected under a lower disease pressure. However, under a higher disease pressure, synergism was observed at all fungicide combinations, except a propiconazole and boscalid tank mixture. These data suggest turfgrass managers in golf course can take advantage of fungicide synergism to control dollar spot using the products and rates in this study.

• Progress in Medical Physics
• /
• v.23 no.1
• /
• pp.26-32
• /
• 2012

The magnification technique has recently become popular in bone radiography, mammography and other diagnostic examination. However, because of the finite size of X-ray focal spot, the magnification influences various imaging properties with resolution, noise and contrast. The purpose of study is to investigate the influence of magnification and focal spot size on digital imaging system using eDQE (effective detective quantum efficiency). Effective DQE is a metric reflecting overall system response including focal spot blur, magnification, scatter and grid response. The adult chest phantom employed in the Food and Drug Administration (FDA) was used to derive eDQE from eMTF (effective modulation transfer function), eNPS (effective noise power spectrum), scatter fraction and transmission fraction. According to results, spatial frequencies that eMTF is 10% with the magnification factor of 1.2, 1.4, 1.6, 1.8 and 2.0 are 2.76, 2.21, 1.78, 1.49 and 1.26 lp/mm respectively using small focal spot. The spatial frequencies that eMTF is 10% with the magnification factor of 1.2, 1.4, 1.6, 1.8 and 2.0 are 2.21, 1.66, 1.25, 0.93 and 0.73 lp/mm respectively using large focal spot. The eMTFs and eDQEs decreases with increasing magnification factor. Although there are no significant differences with focal spot size on eDQE (0), the eDQEs drops more sharply with large focal spot than small focal spot. The magnification imaging can enlarge the small size lesion and improve the contrast due to decrease of effective noise and scatter with air-gap effect. The enlargement of the image size can be helpful for visual detection of small image. However, focal spot blurring caused by finite size of focal spot shows more significant impact on spatial resolution than the improvement of other metrics resulted by magnification effect. Based on these results, appropriate magnification factor and focal spot size should be established to perform magnification imaging with digital radiography system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.373-380
• /
• 2004

The purpose of this study was to estimate satisfaction and evaluation degree of students' spot-practice in department of food and nutrition and to investigate relating factors to them for development of spot-practice Programme. The survey for analysis was conducted through the questionnaires to 229 students finished internship. Proportions of the students were 93.9% for senior, 93.9% for female. Proportions of spot-practice facilities were 38.9%, 46.7%, and 14.4% for school, business & industry, and hospital respectively. The major part of subjects (83.8%) took part in spot-practice during 2 weeks. The satisfaction scores to spot-practice were the lowest for pay, and the highest for a kind of spot-practice facilities. The evaluation scores were the lowest for 'I made a plan and prepared my work in advanced', and the highest for 'I did my best for doing my work'. The satisfaction score in hospital was significantly lower than those in school or business & industry. The satisfaction score in self-operated foodservice was significantly higher than that in contract managed one. However, there no significant differences in evaluation scores by foodsevice employment type. In the case of coincidence of area in spot-practice and residence, or facilities of spot-practice and job desired, the satisfaction and evaluation scores were significantly higher than those of others. The period of spot-practice was significantly positively correlated with satisfaction scores for atmosphere of spot-practice facilities, service and treatment for spot-practice student, while negatively correlated with evaluation score for 'I did my best for doing my work'. The spot-practice pay was significantly positively correlated with satisfaction and evaluation scores for various items. In conclusion, various factors are related to satisfaction and evaluation degree of spot-practice students, and consist concern and support from college St university, foodservice institution, and government for systematic spot-Practice are required.

• Journal of Fashion Business
• /
• v.12 no.6
• /
• pp.34-45
• /
• 2008

This research was designed to find decision factors through color assortment planning process by Korean women's clothing merchandisers and to look for if there exists difference with American women's clothing merchandisers. A merchandise assortment is a collection of various quantities of styles, colors, sizes, and prices of related merchandise, usually grouped under one classification within a department. The subjects were 20 women's clothing merchandisers who work for clothing retail stores from 5 to 22 years in US and Korea. The authoring process was done for qualitative data analysis. The decision factors of color assortment planning were identified with four stages; information search, qualitative evaluation, quantitative evaluation, and selection. There were differences of color assortment decision factors due to different business types, business sizes, fashion-ability, sourcing ways, and merchandise turnover. Noticeable color assortment decision factor differences caused by country difference were not found except considering the target market ethnicity and skin color in US market. Korea merchandisers seem to be more sensitive to present sales data usages and spot order availability in color assortments because of more local production use than American merchandisers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6432-6439
• /
• 2014

The NAUT (Non-contact Air coupled Ultrasonic Testing) technique is one of the ultrasonic testing methods that enables non-contact ultrasonic testing by compensating for the energy loss caused by the difference in acoustic impedance of air with an ultrasonic pulser receiver, PRE-AMP and high-sensitivity transducer. As the NAUT is performed in a state of steady ultrasonic transmission and reception, testing can be performed on materials of high or low temperatures or specimens with a rough surface or narrow part, which could not have been tested using the conventional contact-type testing technique. For this study, the internal defects of spot weld, which are often applied to auto parts, and CFRP parts, were tested to determine if it is practical to make the NAUT technique commercial. As the spot welded part had a high ultrasonic transmissivity, the result was shown as red. On the other hand, the part with an internal defect had a layer of air and low transmissivity, which was shown as blue. In addition, depending on the PRF (Pulse Repetition Frequency), an important factor that determines the measurement speed, the color sharpness showed differences. With the images obtained from CFRP specimens or an imaging device, it was possible to identify the shape, size and position of the internal defect within a short period of time. In this paper, it was confirmed in the above-described experiment that both internal defect detection and image processing of the defect could be possible using the NAUT technique. Moreover, it was possible to apply NAUT to the detection of internal defects in the spot welded parts or in CFRP parts, and commercialize its practical application to various fields.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.39-53
• /
• 2014

The Korean population is aging rapidly and a disproportionate share of older people(aged 65 and older) lives in rural areas. The rural population is aging more rapidly than the population in urban area. However, the majority of studies on aging population focuses on an urban area rather than a rural area. Rural areas have been alienated from the priority of the national policy. For these reasons, this study is to show the level of population aging and to analyze the spatial spillover patterns of aging population in rural areas for the establishment of localized policy on population aging. The main findings of this study can be summarized as follows. First, the level of population aging varies in different localities such as socio-economic and locational characteristics. Secondly, there are distinct differences between hot spot region(clustering of high aging index) and cold spot region(clustering of low aging index) in spatio-temporal spillover patterns. This study intends to suggest an useful information to establish the area-specific policy on aging population through the results of analysis.

• Weed & Turfgrass Science
• /
• v.2 no.4
• /
• pp.408-412
• /
• 2013

Dollar spot caused by Sclerotinia homoeocarpa F.T. Benn. is a common and economically important turfgrass disease in South Korea. Fungicides mixture (propiconazole 25% + boscalid 47%) treatments, showing synergistic interaction, with three application rates (low: 50.3 ml $10a^{-1}$ and 97.5 g $10a^{-1}$, intermediate: 67.0 ml $10a^{-1}$ and 130.0 g $10a^{-1}$, and high: 100.5 ml $10a^{-1}$ and 195.0 g $10a^{-1}$) and two application intervals (10 and 15 days) were evaluated for control of dollar spot in creeping bentgrass golf course putting green. In both nontreated plots of field A and B, the disease has severed as 48.3 and 60.0% after the pathogen inoculation. Two fungicide mixture treatments showed significantly higher the disease control effect than a single fungicide treatment (propiconazole). Field A which showed more the disease severity but the fungicide still showed acceptable level of the disease efficacy (89.0%), significant differences in control value were not detected among treatments. The results suggest that the lower application rate of two fungicides mixture treatments may reduce the dollar spot disease severity in creeping bentgrass golf course putting green.

• Korean Journal of Metals and Materials
• /
• v.47 no.12
• /
• pp.834-841
• /
• 2009

A study on the welding of electrogalvanized TRIP (Transformation-Induced Plasticity) steels was done to compare the life of the electrode and the alloying phenomena on the electrode tip surface using singlephase AC and inverter-DC resistance welding processes. A longer life of the electrode (>200 welds) was achieved using the inverter-DC welding process. The tensile shear strength was higher in the electrode life test when welded with the inverter DC welding machine it maintained a higher value even when the welding nugget diameter was smaller than specified. When spot-welding was conducted using the single-phase AC welding process, a higher wear rate of the electrode was observed compared to that with the inverter-DC process. An alloying layer used to determine the rate of electrode growth showed differences in the metallurgical features of the surface alloying and Zn penetration depending on whether the single-phase AC process or the inverter-DC welding process was used. Moreover, changes in the dynamic resistance during the electrode life test were correlated with the electrode wear (or growth) rate.

• The Korean Journal of Pain
• /
• v.21 no.2
• /
• pp.112-118
• /
• 2008

Background: This study was conducted to quantitatively analyze proteins associated with the calcitonin gene-related peptide (CGRP) in cerebrospinal fluid (CSF) that was obtained from a rat model of chronic neuropathic pain following administration of intrathecal $CGRP_{8-37}$. Methods: Male Sprague-Dawley rats (100-150 g, 5-6 wks) were divided into two groups, sham controls and neuropathic pain models. At the time of operation for neuropathic pain model, an intrathecal catheter was threaded through the intrathecal space. At 1 or 2 wks after the operation (maximum pain state), a test dose of 1, 5, 10, or 50 nM of $CGRP_{8-37}$ was injected into the intrathecal catheter and the CSF was then aspirated. Conventional proteomics to evaluate the CSF were then performed using high resolution 2-D, gel electrophoresis followed by computational image analysis and protein identification by mass spectrometry. Results: Treatment with $CGRP_{8-37}$ effectively alleviated mechanical allodynia in a dose dependent manner. The most effective response was obtained when a dose of 50 nM was administered, but significant differences were obtained following administration of only 5 nM $CGRP_{8-37}$. Furthermore, the results of the proteomic analysis were consistent with the experimental results. Specially we detected 30 differentially expressed spots in 7 images when 2-D gel electrophoresis was conducted. The intensity of 6 of these spots (spot number: 20 and 26-30) was found decrease the $CGRP_{8-37}$ dose increased; therefore, these spots were evaluated by mass spectrometry. This analysis identified 2 different proteins, CGRP (spot numbers: 26-30) and neurotensin-related peptide (spot number: 20). Conclusions: The results of this study suggest that CGRP plays a role in chronic central neuropathic pain and is a major target of chronic neuropathic pain management.