• Journal of Welding and Joining
• /
• 제29권5호
• /
• pp.72-81
• /
• 2011

In the present day, the needs of new steel for lightweight car-body have been increased in the automotive industry. however, the resistance spot welding is difficult to apply to the new steel because of the narrow weld current range and defects. As the solutions to these problems, adhesive bonding process is proposed. Adhesive bonding which reduce noise and vibration can be applied to joining the new steel. In this study, crash tests of b-pillar applied the resistance spot welding, structural adhesive bonding, the mixture of the structural adhesives and resistance spot welding were performed. And FEM crash model for b-pillar applied the structural adhesive bonding was developed. The results of experiment and analysis on b-pillar crash test were compared to verify the validity.

• 서비스연구
• /
• 제5권1호
• /
• pp.91-103
• /
• 2015

본 논문은 한국거래소(KRX)에서 제공한 KT(한국통신)와 SK텔레콤의 현물수익률 및 KT와 SK텔레콤 선물수익률 간의 선도-지연효과를 분석하였다. 분석을 위한 통계분석 기간은 2012년 1월 1일부터 2014년 12월 31일까지이며, 자료는 일별 종가자료 608개를 사용하였고, 분석도구로는 E-Views 6을 이용하여 VAR 모형을 통한 그랜저 인과관계분석(Granger Causality test)과 충격반응분석(Impulse Response Function) 및 분산분해(Variance Decomposition)를 실시하였다. 주요 분석결과는 다음과 같다. 첫째, 그랜저 인과관계분석결과 KT선물수익률과 SK텔레콤 선물수익률은 KT현물수익률과 SK텔레콤 현물수익률에 대하여 강한 예측력이 있다는 것으로 추론할 수 있다. 그러나 KT현물수익률과 SK텔레콤 현물수익률은 KT선물수익률과 SK텔레콤 선물수익률에 대한 예측력이 존재하지 않고 있다는 것을 알 수 있었다. 둘째, 충격반응분석결과 KT선물수익률과 SK텔레콤 선물수익률은 KT현물수익률과 SK텔레콤 현물수익률에 즉각적으로 영향을 미치다 일정시차가 지난 후에 사라지는 것으로 나타났다. 마지막으로 분산분해 분석결과 KT현물수익률과 SK텔레콤 현물수익률의 변화 중에 많은 변화가 KT선물수익률과 SK텔레콤 선물수익률의 변화에 의하여 설명되어짐을 추론할 수 있다. 이러한 분석결과는 개별 주식 현물과 선물을 운용하고 있는 개인투자자 뿐만 아니라 집합투자업자 및 연기금들이 투자정책을 수립하는데 있어서 여러 가지 의미있는 시사점을 제공해 줄 것으로 판단된다. 또한 선물과 옵션시장을 담당하는 한국거래소와 국내외 투자자들이 자산배분정책과 포트폴리오 정책을 수립하는데도 있어서도 유익한 시사점을 제공할 것으로 판단된다.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.109-117
• /
• 1994

Spot welding has wide used with a high work efficiency in the automotive and aerospace industries. Up to the present, the technique mainly used to test spot welds on production lines has been entirely depended upon destructive chisel or peel testing. Therefore, it's being very important assignment to secure the NDE technique which can be evaluate spot weld quality with more efficiency and high reliability. This paper discusses the feasibility of UNDE techniques to evaluate spot weld quality. For the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of a the corona bond from nugget, ultrasonic c-scan image and distribution of reflective echo amplitude was measured by immersion method with the mechanical and the electronic scanning of point-focussed ultrasonic beam(25 MHz). As the results of this study, corona bond which is the most dangerous types of interface defects can be successfully detected, as well as expulsion and voids. Ultrasonic testing results were confirmed and compared by optical microscope and SAM(Scanning Acoustic Microscope) observation of the spot-weld cross section. The results show that the nugget diameter can be successfully measured with the accuracy of 0.8 mm.

• 대한금속재료학회지
• /
• 제49권12호
• /
• pp.967-976
• /
• 2011

Conventional fracture tests of resistance spot welds have been performed without consideration of the paint baking process in the automobile manufacturing line. The aim of this paper is to investigate the effect of the paint baking process on load carrying capacity and fracture mode for resistance spot welded 590 dual phase (DP), 780DP, 980DP, 590 transformation in duced plasticity (TRIP), 780TRIP and 1180 complex phase (CP) steels. With paint baking after resistance spot welding, the l-shape tensile test (LTT) and nano-indentation test were conducted on the as-welded and paint baked samples. Paint baking increased the load-carrying capacity of the resistance spot welded samples and improved the fracture appearance from partial interfacial fracture (PIF) to button fracture (BF). Improvement in fracture appearance after LTT is observed on weldments of 780 MPa grade TRIP steels, especially in the low welding current range with paint baking conditions. The higher carbon contents (or carbon equivalent) are attributed to the low weldability of the resistance spot welding of high strength steels. Improvement of the fracture mode and load carrying ability has been achieved with ferrite hardening and carbide formation during the paint baking process. The average nano-indentation hardness profile for each weld zone shows hardening of the base metal and softening of the heat affected zone (HAZ) and the weld metal, which proves that microstructural changes occur during low temperature heat treatment.

• Journal of Mechanical Science and Technology
• /
• 제17권8호
• /
• pp.1113-1119
• /
• 2003

Experimental and numerical analyses were performed to characterize the fatigue behavior of spot welded joints in suspension mounting of a passenger car body. Static and fatigue tests were carried out for the tensile-shear and cross-tension specimens. S-N curve and fatigue strengths were obtained from the fatigue test of various specimens. Nonlinear finite element analysis showed that fatigue behavior of spot welded joints could be well estimated in terms of Von Mises stress at the nugget edge. Fatigue behavior of spot welded joint was represented by Von Mises stress better than the fatigue load.

• 재무관리연구
• /
• 제22권2호
• /
• pp.189-212
• /
• 2005

본 연구는 새로운 정보에 대하여 국채선도금리시장(forward market)과 국채 현물시장(spot market) 중 어느 시장이 더 효율적으로 반응하는지에 관한 분석을 실시하였다. 2002년 3월부터 2005년 1월말까지 3개월, 6개월, 9개월 및 1년물 국채선도금리(forward rate)와 각 시계열들의 현물 금리의 수익률 및 변동성자료를 사용하여 그랜져인과관계분석, 충격반응함수 및 분산분해 분석을 실시하였으며 주요 분석결과는 다음과 같다. 먼저 수익률 및 변동성을 이용한 그랜져인과관계분석(Granger causality test)결과에 의하면 국채 선도금리시장이 국채현물시장보다 새로운 정보에 대하여 더 효율적으로 반응하는 것으로 나타났다. 충격 반응함수(impulse response analysis)에서도 국채선도금리시장의 국채현물시장에 대한 영향력이 국채현물시장의 국채선도금리시장에 대한 영향력보다 더 강하고 지속적인 것으로 나타났다. 분산분해분석(variance decomposition analysis)에서는 전체적으로 3개월 및 6개월 등기간이 짧은 국채선도금리 수익률 및 변동성이 기간이 긴 국채선도금리보다 국채현물시장에 대한 영향력이 상대적으로 더 큰 것으로 나타났다. 이러한 분석결과로부터 새로운 정보에 대하여 국채현물시장보다는 국채선도금리시장이 더 효율적으로 반응하고 있음을 추론해 볼 수 있으며 이는 기존 국내외 주식현물시장과 선물시장들 간의 영향력을 분석한 결과 선물시장의 현물시장에 대한 영향력이 더 강한다는 결과들과 일맥상통하는 것으로 나타났다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.213-222
• /
• 2001

In the study, the fatigue strength improvement and mechanism have been estimated by the Spot-Heating treatment on welded bead toes. For this, web-gusset specimens were made without residual stresses and the others with residual stresses imposed by Spot-Heating. The 4-point bending tests were performed in order to estimate the effect of spot-heating on fatigue strength and fatigue characteristics quantitatively for non load-carrying fillet welded joints subjected to pure bending. As a result of fatigue test, fatigue strength of As-Welded specimen for non load-carrying fillet welded joints subjected to pure bending has satisfied the grade of fatigue prescribed in specifications of korea, AASHTO and JSSC. As compare with As-Welded specimen and Spot-Heating specimen have increased about 20% for the fatigue strength at $7.7{\times}10^6$ cycles. The Spot-Heating by reformation of the residual stress on welded bead toes has greatly affected the fatigue crack propagation life, but has slightly affected the fatigue crack initiation life.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.42-62
• /
• 1997

Resistance spot welding has been widely used in the sheet metal joining processes because of its high productivity and convenience. Recently, automobile industries are trying to replace partly steel sheets with aluminum alloy sheets. Among currently produced aluminum alloys, Al alloy sheets of Al-Mg-Si(6000 series) are being tested. Especially, 6000 series are the most probable substitute in view of strength and weldability. In this paper, an attempt was made to apply resistance spot welding to joining of dissimilar sheet metals (KS6383+SCPZn or KS6383+SHCP). An effort was made to balance heating rate in the Al alloy with that in the steel sheets by increasing electrode tip diameter. Although resistance spot welding of Al alloy sheet and sheet metals does not produce desirable nugget, it proved to have reasonable strength if optimal weld condition is found by tensile-shear strength and fatigue life test. Since spot weld joints in automobile are always experiencing repeated load, spot welding methodology proposed in this paper is found to be not suitable to automobile body manufacturing.

• 한국식물병리학회지
• /
• 제11권3호
• /
• pp.217-223
• /
• 1995

Nature of graft transmissibility of pear abnormal leaf spot disease was examined by various grafting methods in the greenhouse and field. When the diseased and symptomless twigs were collected in winter and grafted in the next spring to the seed-originated healthy root stock, the abnormal leaf spot was developed only in the case of the diseased twigs. Double grafting on a seed-originated healthy root stock, where the diseased and the symptomless twigs were used as 1st and 2nd scions, respectively, developed abnormal leaf spot lesions without exception on the 2nd scions. Tongue-graft with the diseased and the symptomless trees also incited abnormal leaf spots on the both trees. Abnormal leaf spots of were also developed on HN-39, an indicator pear tree, used as a 2nd scion in a double graft test, where the diseased twig and a seed-originated healthy tree were used as the 1st scion and the root stock, respectively. When the diseased twig was top-grafted to the healthy root stock, lesion development of abnormal spot was limited to the grafted twig itself in the 1st year, but expanded to the main branches in the 2nd year, and spread over the whole tree in the 3rd year. This result indicates that the causal agent of abnormal leaf spot disease is transmitted by graft.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.290-296
• /
• 2012

Cold-rolled carbon steel sheets are commonly used in railroad car or commercial vehicles such as the automobile. These are mainly fabricated by spot welding which is a kind of electric resistance welding. But fatigue strength of spot welding joint is lower than that of base metal due to high stress concentration at nugget edge of the spot welded part. And fatigue strength of them is especially influenced by not only geometrical and mechanical factors but also welding conditions of the spot welded joint. So for fatigue design of gas welded joints such as TS-type joints, it is necessary to obtain design information on stress distribution at the weldment as well as fatigue strength of spot welded joints. And also, the influence of the geometrical parameters of spot welded joints on stress distribution and fatigue strength must be evaluated. And analysis approach for fatigue test using design of experiment are evaluated optimum factor in TS-type welded joint and geometrical parameters of materials. Using these results, that factors applied to fundamental information for automation of fatigue design.