• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.11
• /
• pp.108-115
• /
• 2007

We have designed a high transmission C-shaped aperture using finite differential time domain (FDTD) technique. The C-shaped aperture was fabricated in the aluminum thin film on a glass substrate using a focused ion beam (FIB) milling. Nano-size patterning was demonstrated with a vacuum contact device to keep tight contact between the Al mask and the photoresist. Using 405 nm laser, we recorded a 50 nm-size dot pattern on the photoresist with the aperture and analyzed the spot size dependent on the dose illuminated on the aperture.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.84-86
• /
• 2003

The laser welding and its analysis of thin-sheet carbon steels were carried out with high power CO$_2$1aser. Bead on plate welding of thin sheet was examined to investigate the effect of weld variables of laser welding, and to obtain optimum welding condition. Butt-welding was also carried out to show the effect of gap on the laser weldability of thin sheet. At high welding speed, the partial penetration was obtained by low heat input. Otherwise, porosity was formed in the bead at low weld speed because of too many heat input. The maximum gap tolerance on laser welding was observed to be about 0.2mm. This gap size has good relationship with beam size of laser spot(about 0.3mm). The formability of welded sheet was about 80% value of base metal and the gap size has not affected on the formability, although weld quality is dependent on the gap size.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.465-471
• /
• 2005

A method of calculation fur propagating and focusing of focused beams generated in antenna arrays, using BPM(Beam Propagation Method), is presented in this paper. Based on the diffraction theory, the beam focusing and Propagation is studied specially for the case of the antenna way fed by the Rotman lens that is able to focus microwave power on its focal arc or generate multiple beams. There are difficulties in performing a full-wave simulation using a commercial EM simulation tool for propagating and focusing of beams because of the structural complexity and the feeding assignment of the antenna array. Therefore, as an alternative solution, the BPM is presented to calculate the beam propagation from the aperture-type antennas. From the point of view of optics, the propagations of the lens have been simplified from the Fresnel diffraction integral to the Fourier transform. Using Fourier Transform, a beam propagation method is developed to show improvement of the resolution by controlling the wavefront of wave Propagating from an aperture-type antenna array. The beam width(or spot size) and the intensity are calculated for a focused beam propagating from an array having $10\lambda$ of its size. For the beams with $20\lambda,\;30\lambda$, and $50\lambda$ of geometrical focal length, the half-power beam widths(or spot size) are about 1.1\lambda,\;1.3\lambda,\;and\;1.9\lambda$ respectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.129-134
• /
• 2017

The process of producing a fish trap frame is very complicated and manual, so it is expensive, the quality of the product is unstable, the quality is not guaranteed, the durability is weak, and it cannot be used for a long time. Therefore, we made a fish trap frame-making machine to reduce the manpower and costs and to make robust products. This machine cuts the wire of mild steel to a certain size and then makes the connecting parts into a trapezoid shape by spot welding. In this study, the weld point shear strength between manual and automatic operation was compared and analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6081-6088
• /
• 2012

An unequal clustering method in wireless sensor networks is the technique that forms the cluster of different size. This method decreases whole energy consumption by solving the hot spot problem. In this paper, I propose a layer-based dynamic unequal clustering using the unequal clustering model. This method decreases whole energy consumption and maintain that equally using optimal cluster's number and cluster head position. I also show that proposed method is better than previous clustering method at the point of network lifetime.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.21-26
• /
• 2000

A microarrayer system was developed mainly for manufacturing DNA chips. The 3-axis robot was designed to automatically collect samples from 96-or 384-well microtiter plates using up to 16 simultaneously moving pens and to deposit them on a surface-modified slide glass. This is followed by a wash/dry operation in a clean station. The cycle is repeated with a new set of samples, This system can deposit cDNA or oligonucleotides with spot intervals of $150{\;}\mu\textrm{m}$ and the spot size of $80\mu\textrm{m}$, thus allowing a high density DNA chip containing about 5,000 spots per $\textrm{cm}^2$. The entire procedure is controlled by the Visual C++ program that was written in our laboratory by using a personal computer with Pentium 100 CPU.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.205-211
• /
• 1998

The MTF(modulation transfer function) measuring system with a linear CCD(charge coupled-device) was constructed to cvaluate a color CRT(catode ray tube). The measured MTF values were corrected by considering the spectral response and the pixel sizes of CCD. The effects of a spot size, video bandwidth, pitch of shadow mask holes, display luminance, and ambient illumination on image quality were studied. The uniformity of resolution and the contrast Ioss by ambient light of the color CRT monitor were measured, and the results were analyzed by MTFA(modulation threshold area).

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.4
• /
• pp.14-19
• /
• 2005

A transient numerical simulation was conducted to have variation of temperature on an element of resistive Superconducting Fault Current Limiter (SFCL) under quench condition. It is very important engineering information for an optimum design of cryogenic system for cooling of a resistive SFCL element. A bifilar coil for resistive SFCL for 10 MVA system was incorporated as a model in this numerical study. From the numerical simulation result, it was found that the averaged temperature on the shunt and Bi-2212 element at 500 kW, 100 ms was 711.1 K and 198.4 K respectively. The temperature variation with the change of the hot-spot size and time is also obtained. The maximum temperature was continuously increased in all cases until the hot-spot stops at 100ms and it was going down after then. Such as, the details of temperature distribution on the SFCL element obtained from this numerical study and it should be very valuable information on the decision of the cooling capacity of cryogenic system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1156-1169
• /
• 1989

본 연구에서는 용접도중 발생할 수 있는 용접질 저항요인을 전극분리현상을 측정하여 파악하고 용접 열입력에 해당하는 용접전류를 학습제어방식(self-learning control)에 의하여 컴퓨터와 주변기기(interface)를 통해 조절함으로서 요구되는 균일한 용접질이 항상 보장되도록 하였다. 여기서 학습제어방식을 태택한 이유는 제어하고자 하는 대상의 동적 모델(dynamic model)이 없어도 제어기 이득의 선정이 비교적 자유롭고 용접 제어장치가 자체적으로 감지(monitoring)한 신호로 판단하여 제어동작을 취함으로서 용접시 축적되는 정보(data)가 용접기에 일종의 지능을 부여할 수 있어서 진보된 개념의 용접제어장치 개발의 가능성을 검토해 보기 위함이다.

• Korean Journal Plant Pathology
• /
• v.13 no.1
• /
• pp.18-21
• /
• 1997

Bipolaris panici-miliacei, Cercospora fusimaculans, Fusarium moniliforme and Rhizoctonia solani were pathogenic fungi detected from 5 seed samples of common millet (Panicum miliaceum). Morphological characters of B. panici-miliacei were as follows. Conidiophores were dark olivaceous brown, simple, cylindrical, geniculate, and septate. Conidia were fusoid, dark olivaceous brown, tapering gradually toward the ends, straight to slightly curved, 3~13 distoseptate, and 29.4~155.4$\times$10~26 ${\mu}{\textrm}{m}$ in size with dark hilum included within the contour of the basal cell. Seed infection with B. panici-miliacei caused seed rotting, coleoptile spot, and seedling blight of common millet plants. According to the inoculation experiments, B. panici-miliacei showed strong virulence on the young seedlings of common millet, but very weak virulence on the young seedlings of rice (Oryza sativa) and foxtail millet (Setaria italica).