• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2899-2905
• /
• 2015

This paper presents is a study on the pressure distribution families low in response to ground conditions. Indoor shoes, outdoor shoes, working shoes, are four categories of shoes sports shoes, has been used in the present study, Concrete to target men in their 20s of 45people wearing the 260mm(Euro Code EU40), the experiments were carried out in the sand ground. Measurement of stress and pressure at the time of walking, Techstorm company Insole System the measured toe of the foot using, foot binding, was the metatarsal, the low pressure come from Fujoku four areas measured. Depending on the shoes and ground conditions findings, the results of this study represents the distribution of other stress and pressure, is expected to be useful in the development of a wearable shoe sand soil.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.184-192
• /
• 2015

Korea has already entered into an aging society. In recent decades, the health problems for seniors has received considerable interest. We often see the elderly who have been struggled from discomfort or illness of the foot. Those foot related problems mainly cause from the use of improper shoes. Recently, shoe makers sell the shoes for seniors, so called comfort shoes, but the shoes are too expensive for seniors to buy easily. In this paper, we develop cheap insoles for seniors as an alternative of the comfort shoes and suggest the systematic process for the insoles development. This systematic process is as follows: 1) Survey the literature about the market of insole, 2) Investigate the standard size of body and foot for the seniors in Korea, 3) Analyze the customer needs by survey, 4) Study the walking pattern by experiments, and 5) Develop the novel insole for the seniors to relieve the inconveniences related with foot. From the newly developed insoles, the company B gains the sales increasing effect approximately 30% over through the increase in consumer satisfaction and company reputation and secures for intellectual property rights. Using the database from Korea Research Institute of Standards and Science, the reliability of developing technology of the functional insole has been obtained. The seniors are also enable to choose an alternative of comfort shoes for foot health. In the future, the insoles developed from this study have wide applications in the medical, cosmetic fields, and leisure sports fields. Accordingly, it seems to require more systematic studies utilizing Walk Analyzer and Foot Pressure Meter.

• Advances in concrete construction
• /
• v.16 no.6
• /
• pp.291-302
• /
• 2023

As the first part of the body that strikes the ground during running, sports shoes are especially important for improving performance and reducing injuries. The use of new nanotechnology materials in the shoe's sole that can affect the movement angle of the foot and the ground reaction forces during running has not been reported yet. It is important to consider the material of the sole of the shoe since it determines the long-term performance of sports shoes, including their comfort while walking, running, and jumping. Running performance can be improved by polymer foam that provides good support with low energy dissipation (low energy dissipation). Running shoes have a midsole made of ethylene propylene copolymer (EPP) foam. The mechanical properties of EPP foam are, however, low. To improve the mechanical performance of EPP, conventional mineral fillers are commonly used, but these fillers sacrifice energy return. In this study, to improve the magnificence of physical education training with nanotechnology, carbon nanotubes (CNTs) derived from recycled plastics were prepared by catalytic chemical vapor deposition and used as nucleating and reinforcing agents. As a result of the results, the physical, mechanical, and dynamic response properties of EPP foam combined with CNT and zinc oxide nanoparticles were significantly improved. When CNT was added to the nanocomposites with a weight percentage of less than 0.5 wt%, the wear resistance, physical properties, dynamic stiffness, compressive strength, and rebound properties of EPP foams were significantly improved.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.140-147
• /
• 2019

The purpose of this study is to find biomechanical parameters for optimal shoes production through an ergonomic usability assessment of five existing types of shoes preferred by B-BOY. Ten experts and ten non-experts participated in the experiment, and 12 infrared cameras (Qualis, Oqus), force plate (Kistler, 9286AA) and foot pressure plate (Zebris Gmbh, Zebris PDM-System) were used to obtain the data. The results of the study are as follows. First, P shoes with a friction coefficient of 0.38 and a free moment of 0.32 N/m/kg are desirable in terms of traction capability and safety. Second, on the cushion, it was found that the N shoes 2.51 N, sec/kg and non-expert, and 2.86 N and sec/kg were suitable. Third, it is deemed appropriate for C shoes with a forefoot average pressure of 10.11 KPa (right), 10.05 KPa (left), and V shoes with a rearfoot average pressure of 8.4 KPa (right) and 8.36 KPa (left). In conclusion, the combination of the structure and material of V shoes should be developed for traction and stability, N shoes for cushion, and walking balance for C and V shoes.

• Fashion & Textile Research Journal
• /
• v.4 no.2
• /
• pp.176-187
• /
• 2002

The aim of this research is to establish basic materials for fashion merchandising by observing the street fashion of the juveniles and by analyzing their wearing, coordination and fashion trend. We have taken the photograph of the street fashion of 202 male teenagers and 265 female teenagers in Busan, and analyzed in the category of style, item, color, pattern, materials, hair style, shoes and accessories. We have concluded that the most frequent items were shirts (male), turtle neck (female) and jeans. The main style was casual just as jumper-look, sweater-look, gardigan-look. The typical female fashions that were hip-hop-look, twin neat-look, trench coat-look, were more various than male. For the color coordination, contrast color coordination was more dominant than similarity color coordination. Dominant patterns were solid, and also check and stripe patterns were frequently found in upper garment. The representative materials were soft for upper garment, and hard for trousers. Male teenagers prefer middle-length hair style and female teenagers prefer long hair style. The juveniles in Busan are wearing sports shoes and leather shoes in similar frequency. Their favorite accessories are bag, muffler and hat.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.516-517
• /
• 2019

3D printing technology has been receiving attention as a key technology in that it can output 3D printed designs that are either virtual or flat. This study analyzed the general manufacturing process by first compiling the concept of shoes, presented the 3D printed shoe manufacturing process, and studied custom manufacturing techniques by dividing the produced shoe cases by brand (sports brand, designer brand). Through case analysis, 4 design manufacturing techniques of 3D printed shoes were derived. Therefore, this study is expected to provide a basis for more advanced creative ideas in the shoe design area using 3D printing.

• Journal of Life Science
• /
• v.18 no.12
• /
• pp.1775-1778
• /
• 2008

The purpose of this study was to compare the biomechanical difference of barefoot and two types taekwondo footwear. which will provide scientific data to coaches and players, to further prevent injuries and to improve each players skills. How to an effect on human body which studied a kinematics and kinetics from 8 college students during experiments. This study imposes several conditions by barefoot and two types of taekwondo footwear ran under average $3.82{\pm}0.59$ m/sec for kinetics analysis. The result of comparative analysis can be summarized as below. Friction coefficient analysis showed A Company shoes 0.60 and M Company shoes 0.61. Ground reaction force also showed that statically approximates other results from impact peak timing (p<0.001), Maximum loading rate (p<0.001), Maximum loading rate timing (p<0.001) and impulse of first 20 percent (p<0.001). Moment was M Company shoes bigger than A Company shoes to pronation moment and supination moment.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.153-168
• /
• 2005

The purposes of this study were to determine the influence of midsole hardness and sole thickness of sports shoes on ball flex angle and position with increment of running velocity. The subjects employed for this study were 10 college students who did not have lower extremity injuries for the last one year and whose running pattern was rearfoot striker of normal foot. The shoes used in this study had 3 different midsole hardness of shore A 40, shore A 50, shore A 60 and 3 different sole thickness of 17cm, 19cm, 21cm. The subjects were asked to run at 3 different speed of 2.0m/sec, 3.5m/sec, 5.0m/sec and their motions were videotaped with 4 S-VHS video cameras and 2 high speed video cameras and simultaneously measured with a force platform. The following results were obtained after analysing and comparing the variables. Minimum angle of each ball flex position were increased with the increment of running velocity and shoe sole thickness(P<0.05), but mid-sole hardness did not affect minimum ball flex angle. The position which minimum angle was shown as smallest was 'D'. Midsole hardness and sole thickness did not affect time to each ball flex minimum angle, total angular displacement of ball flex angle, and total angular displacement of torsion angle(P<0.05). The position which minimum angle was appeared to be earliest was similar at walking velocity, and E and F of midfoot region at running velocity. Total angular displacement of ball flex position tended to increase as shifted to heel. It was found that running velocity had effects on ball flex angle variables, but shoe sole thickness partially affected. It would be considered that running velocity made differences between analysis variables at walking and running when designing shoes. Also, it was regarded that shoes would be developed at separated region, because ball flex angle and position was shown to be different at toe and heel region. It is necessary that midsole hardness and thickness required to functional shoes be analyzed in the further study.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.153-160
• /
• 2013

The purpose of this study was to compare biomechanical factors on badminton shoes between anti-slip outsole and non anti-slip outsole. Six subjects participated in this experiment. For three-dimensional analysis, eight cameras (Oqus 3series, Qualisys) were used to acquire raw data, and then the parameters were calculated and analyzed with Visual-3D. In conclusion, the patterns of spent time during side step, and maximum velocities of CoGs were consistent without joint angles of lower extremities in spite of small differences. Those of GRFs, and moment of lower extremities were absolutely consistent. This trend of biomechanical factors was that Y shoe (ante-treatment) was much greater and PS shoe (treatment) was greater than Y shoe (treatment). (That was, Y shoe (ante-treatment) > PS shoe (treatment) >Y shoe (treatment)). The findings of this study showed that anti-slip outsole was effective and brought increasing performance and decreasing injuries. It is suggested that further study of these phenomena will help understand many aspects of human locomotion, including work, performance, fatigue and possible injuries.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.3
• /
• pp.59-72
• /
• 2009

The purpose of this study was to establish objective data for marketing of industries and product development design by researching popular singer fashion of Korea, investigating the preference for popular singer design in street fashion among adolescents on the basis of the research, and drawing an conclusion. To analyze street fashion, total 190 young men and women in their 20s, including teenagers, were surveyed mainly in downtowns around Daehakro, Gangnam and Hongik University. First, in relation to the upper garment, men were found to wear T-shirts and hood T-shirts the most, while women were found to wear T-shirts and one-piece dress the most. Second, in relation to the lower garment, the ratio of those who wore skinny clothes was high both among men and women. Third, in relation to the outer apparel, the ratio of men who wore casual jacket and hood zip-up was high, while the ratio of women who wore tailored jacket and leather jacket was high. Fourth, in relation to shoes, the ratio of men who wore sports shoes was high, while the ratio of women who wore heeled-shoe was high. Fifth, it was found that plane pattern was preferred the most. As it was stated above, the findings of this study on the effect of entertainers' fashion on adolescents through street fashion indicated that the number of adolescents who imitate the fashion of entertainers increased.