• 한국운동역학회지
• /
• 제16권1호
• /
• pp.55-63
• /
• 2006

The purpose of this study is to prove the kinematical characteristics of Deff motion, the high bar performance, in terms of flying phases so that we can provide basic sources for improving gymnastic performance. To do this, we selected and analyzed the performance of two athletes who did Deff motion in the high bar competition of male artistic gymnastic in the 22nd Universiade 2003 Daegu. We drew the conclusions from the kinematical factors that were came out through analyzing three-dimensional cinematography of the athletes' movements, by using a high speed video camera. To make a successful performance, a performer releases the bar at a height of a high bar vertically and at a height of 82cm horizontally, and the flying performance should be made without moving forward, as maintaining the proper balance, in order to rise over 118cm high during the flying phase. When the performer is releasing the bar, an increase of the vertical speed in the center of the body and extension of a knee joint and a hip joint contribute to increasing a flying height. And when the moving body is twisted, leaning to left side is caused by the winding movement of a knee joint, which causes an unstable bar grasp. To grasp the bar stably, just before releasing the performer should gain propulsive force from twisting rotation through increasing the speed of shoulder rotation. And before the peak point, the performer should make sure of a body rotation distance over $164^{\circ}$ so that he or she can do an aerial rotary performance smoothly. When grasping the high bar, the center of the body should be above the bar and the angle of shoulder rotation should be maintained close to $540^{\circ}$ simultaneously. he high point performance(S1) has more speed on an ascending phase and less speed on a descending phase than the low point performance (S2). At the peak point, both the rotation angle of the body and that of the shoulder in high point performance are big as well. In conclusion, it is shown that a performer can make a jump toward the high bar easily with the body straight because the performer can hold the upper part of the body erect early in a descending phase.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.153-168
• /
• 2005

The purposes of this study were to determine the influence of midsole hardness and sole thickness of sports shoes on ball flex angle and position with increment of running velocity. The subjects employed for this study were 10 college students who did not have lower extremity injuries for the last one year and whose running pattern was rearfoot striker of normal foot. The shoes used in this study had 3 different midsole hardness of shore A 40, shore A 50, shore A 60 and 3 different sole thickness of 17cm, 19cm, 21cm. The subjects were asked to run at 3 different speed of 2.0m/sec, 3.5m/sec, 5.0m/sec and their motions were videotaped with 4 S-VHS video cameras and 2 high speed video cameras and simultaneously measured with a force platform. The following results were obtained after analysing and comparing the variables. Minimum angle of each ball flex position were increased with the increment of running velocity and shoe sole thickness(P<0.05), but mid-sole hardness did not affect minimum ball flex angle. The position which minimum angle was shown as smallest was 'D'. Midsole hardness and sole thickness did not affect time to each ball flex minimum angle, total angular displacement of ball flex angle, and total angular displacement of torsion angle(P<0.05). The position which minimum angle was appeared to be earliest was similar at walking velocity, and E and F of midfoot region at running velocity. Total angular displacement of ball flex position tended to increase as shifted to heel. It was found that running velocity had effects on ball flex angle variables, but shoe sole thickness partially affected. It would be considered that running velocity made differences between analysis variables at walking and running when designing shoes. Also, it was regarded that shoes would be developed at separated region, because ball flex angle and position was shown to be different at toe and heel region. It is necessary that midsole hardness and thickness required to functional shoes be analyzed in the further study.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.165-174
• /
• 2007

The subject of this study was male apparatus gymnastics athlete who had scored high points doing basket with 1/2 turn on parallel bars. Then 3D motion analysis were used to calculate & analyse kinematic variables of Basket with 1/2 turn to Handstand. 1. The total average time spent for Basket with 1/2 turn took $2.16{\pm}.08sec$, at the downward upward phase took $.58{\pm}0.00sec$, $.23{\pm}.00sec$, at flight phase took $.28{\pm}.01sec$, at connected area phase took $.72{\pm}0.21sec$, at rotation area phase took $.35{\pm}.14sec$. To have a successful performance, there should be faster speed and velocity to rotate at the downward upward phase, then the upward velocity and height must be used adequately. Moreover, the speed must be faster at the flight connect phase to stabilize Center of Mass(CM) for the body, and must secure more time at the rotation area to have more stable performance. 2. After handstand on parallel bars while moving CM to right hand side, and It must be performed with big and magnificent performance with putting both hand's center to far away from the parallel bars. 3. Furthermore, CM must be moved fast from downwards to right hand side, and CM must be moved fast in vertical movement at upward and flight phase to avoid CM from moving back and forth, and left and right. 4. At downwards, the subject must rotate as bis as possible using hip-joint as wide as possible and at upwards, must put his body to vertical to have stable performance. While rotating or turning, it is better to do with bigger shoulder angle and have to make sure that trunk angle must be not scattered. To perform better and more positive in basket with 1/2 turn on parallel bars, the centrifugal force must be used big and fast at downward, and at upward and flight phase, downward movement must change to vertical movement as soon as possible while turning movement must happen at handstand position. Time spent must be shorten at connected area to stabilize CM and turning must be natural as possible while securing the necessary time of movement to well-balanced. Also, the body must be vertically closed from the ground.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.143-152
• /
• 2005

The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.21-30
• /
• 2005

The purpose of this study is helps to make full use for perfect performance by grasping the defects of Tichonkich motion performed by athlete CSM For this, the study analyzed kinematical variables through Tichonkich motions performed at the first selection competition(1st trial) and final selection competition(2nd trial) for the dispatch to the 28th Athens Olympic Games using the three-dimensional cinematographical method with a high-speed video camera, and obtained the following results. 1. During Tichonkich motion, the execution time of up swing and the right hand moving to the left bar was shorter in the 2nd trial than the 1st one, while the execution time of down swing, the support of the left bar and the right hand moving to the right bar was longer in the 2nd trial than the 1st trial. 2. The horizontal position of COG in the 2nd trial was -35cm in the 1st stage, 42cm in the 3rd stage and 29cm in the 4th stage, that is, it showed a great swing focused on the circular movement compared to the 1st trial, while the vertical position of COG was -59cm in the 2nd stage, that is, it showed a small swing focused on a up and down movement. Also the 5th stage vertical position was 98cm, and the 6th stage vertical position was 95cm in the 2nd trial which were higher than those of the 1st trial, so it has provided magnificence required in the modern gymnastics. 3. And it was indicated that the horizontal velocity at the down swing phase proceeded forward more rapidly in the 2nd trial than that in the 1st trial, and the reverse ascent made a rapid vertical rise lessening left and right velocity change. And in the 5th stage, the 2nd trial was kept very slower in horizontal, vertical and left and right velocity that in the 1st trial, so it reached a handstand with leisurely movement. 4. In the 2nd trial, shoulder joint of the 1st, 2nd, 3rd stages kept a larger angle than that in the 1st trial, that is, it made a great swing while in the 1st trial, it showed a swing movement dependent on kick movement by the flexion and extension of hip joint. Also in the 2nd trial, the body formed a vertical posture with both hands supporting the left bar and hip joint was kept larger as $198^{\circ}$ and $190^{\circ}$ in the 5th and 6th stage than that in the 1st trial, so it made a handstand with the body uprightly stretched out, and magnificent and stable movement.

• 한국운동역학회지
• /
• 제24권2호
• /
• pp.139-149
• /
• 2014

The purpose of this study was to evaluate the effect of angle change of forefoot's adhesive outsole on the electromyographic activity (EMG) of the erector spinae and selected lower limbs muscle during downhill walking over $-20^{\circ}$ ramp. Thirteen male university students (age: $25.4{\pm}3.9$ yrs, height: $176.2{\pm}5.1$ cm, weight: $717.4{\pm}105.0$ N) who have no musculoskeletal disorder were recruited as the subjects. To assess the myoelectric activities of selected muscles, six of surface EMG electrodes with on-site pre-amplification circuitry were attached to erector spinae (ES), rectus femoris (RF), biceps femoris (BF), tibialis anterior (TA), lateral gastrocnemius (LG), and medial gastrocnemius (MG). To obtain maximum EMG levels of the selected muscles for normalization, five maximum effort isometric contraction were performed before the experimental trials. Each subject walked over $0^{\circ}$ and $20^{\circ}$ ramp with three different forefeet's EVA outsole (0, 10, $20^{\circ}$) in random order at a speed of $1.2{\pm}0.1$ m/s. For each trial being analyzed, five critical instants and four phases were identified from the recording. The results of this study showed that the average muscle activities of MG and LG decreased in $20^{\circ}$ shoes compared to $0^{\circ}$ and $10^{\circ}$ ones in the initial double limb stance (IDLS). In initial single limb stance (ISLS) phase, the average muscle activities of ES increased with the angle of forefoot's adhesive outsole, indicating that the increment of shoes' angle induce upper body to flex anteriorly in order to maintain balance of trunk. In terminal double limb stance (TDLS) phase, average muscle activities of TA significantly increased in $20^{\circ}$ outsole compared to $0^{\circ}$ and $10^{\circ}$ ones. There was no external forces acting on the right foot other than the gravity during terminal single limb stance (TSLS) phase, all muscles maintained moderate levels of activity.

• 대한정형외과스포츠의학회지
• /
• 제9권1호
• /
• pp.7-15
• /
• 2010

전방 슬관절 동통 증후군은 여러 가지 형태의 다양한 원인으로 서서히 양측 슬개-대퇴 관절 내 또는 주위에 동통을 야기하는 증상이다. 원인으로는 하지의 부적절한 생역학, 전체적인 신전 기전의 병변, 슬개-대퇴 관절 병변, 슬개골 자체의 병변 또는 부정정렬, 단단한 연부조직, 약화된 근육 등이며, 전방 슬관절 동통 증후군을 평가하기 위해서는 슬개골 정열의 측정이 필요하고 현재 이학적 검사 및 방사선 검사 등 다양한 방법이 사용되어 진단 및 치료 정도를 평가하는데 사용되고 있다. 치료는 슬관절 전방 통증의 원인에 따라 결정되며, 주로 수술적 치료보다는 약물 치료나 대퇴사두근 근력 강화 운동, 함스트링 스트레칭운동 등이 보편적으로 사용되고 있다. 경부목 또는 내측 경골 스트레스 증후군은 전내측 경골 원위 2/3 부위에서 발생되는 통증을 의미하며, 반복적이고 조화되지 않는 충격이 하퇴부에 가해지는 스포츠를 하는 체육인에게 흔히 발생된다. 문제의 원인을 정확히 파악하여 진단하는 것이 치료에 매우 중요하며, 따라서 원인, 치료, 재활 및 예방까지 여러 이론이 보고되었다. 치료는 통증이 심할 경우 휴식과 함께 얼음찜질을 실시하며, 진통제를 복용하여 통증을 완화시켜 주는 것이 좋으며, 또한 다리 근육을 강화시켜 줄 수 있는 운동을 하며, 적절한 재활과 예방적 처치가 추후 재발을 방지하는 데 도움이 된다.

• 한국응용과학기술학회지
• /
• 제37권2호
• /
• pp.232-240
• /
• 2020

본 연구는 복싱 잽 동작 시 제자리 스텝의 사용이 운동역학적 요인들에 미치는 영향을 분석 하는데 목적이 있었다. 이를 위해 최근 1년간 근골격계에 상해가 없었던 오른손잡이 스탠스 유형의 대학교 복싱 선수 8명(나이: 20.38±0.52 yrs, 신장: 172.38±5.80 cm 체중: 63.45±8.56 kg, 경력 6.00±1.07 yrs)이 실험에 참여하였다. 잽 동작 시 제자리 스텝 사용이 운동역학적 요인들에 미치는 영향을 검증하기 위하여 대응표본 t-test(α = .05) 통계방법을 사용하였으며 다음과 같은 결과를 도출하였다. 첫째, W.S(with-step) 가 N.S(non-step) 보다 더 큰 충격력을 나타내었고, 근육의 활성도는 낮은 것으로 분석되었다. 둘째 W.S가 인체 분절의 전방의 속도의 영향을 미쳐서 골반과 발 분절이 더 빠르게 이동하는 것으로 분석되었다. 셋째, W.S는 골반의 회전 움직임이 더 빠른 것으로 나타났다. 넷째, W.S는 N.S보다 상대적으로 오른발과 왼발에 의해서 발생된 전방의 지면반발력이 더 큰 것으로 분석되었다. 이를 통해서 복싱 잽 동작 시 제자리 스텝의 사용은 지면반발력을 증가시켜 인체 분절의 이동 속도와 회전 움직임에 영향을 미치는 것으로 나타났다. 따라서 더 빠르고 민첩한 움직임을 가능케 하여 상대적으로 적은 근육의 사용으로도 더 큰 충격력을 내는 것으로 확인되었다. 그러므로 복싱의 잽 동작 시 효율적으로 상대방에게 큰 충격력을 전달하기 위해서는 제자리 스텝을 동반하는 것이 효과적으로 분석된다.

• 한국체육학회지인문사회과학편
• /
• 제57권6호
• /
• pp.293-308
• /
• 2018

본 연구는 알파인 스키와 관련하여 과거부터 최근까지 진행된 운동역학 연구의 동향을 파악하여 향후 운동역학 분야에서 진행되어야 할 연구 방향을 제언하고자 수행하였다. 운동역학 연구 분야에서는 스키 턴의 메커니즘과 스키어의 등급과 기술 수준에 따른 자세 분석, 스키와 눈의 마찰력, 공기저항 등의 연구가 주로 진행되었다. 이후 측정 센서와 컴퓨터 시뮬레이션을 활용한 연구에서는 IMU와 GPS 센서를 활용하여 스키 장비 개발 및 획득 데이터 검증에 연구가 진행되고 있다. 이와 같은 연구동향을 반영하여 추후 알파인 스키 분야에서 진행되어야 할 운동역학 연구에 대한 제언은 다음과 같다. 첫째, 기존 운동역학 분석 범위의 한계를 넘어 스키 전 구간이 분석 가능하고 스포츠 현장에서 간편하게 활용할 수 있는 측정 장비가 개발되어야 한다. 둘째, 측정 센서를 활용하여 획득한 정보의 정확도 향상과 이를 바탕으로 다양한 분석기법에 관한 연구가 지속적으로 진행되어 스포츠 현장에 도움이 될 수 있는 자료가 제공되어야 한다. 셋째, 컴퓨터 시뮬레이션을 활용하여 스키에서 발생하는 부상 메커니즘을 명확히 정립하고 부상을 예방할 수 있는 방안을 모색해야 한다. 넷째, 컴퓨터 시뮬레이션을 활용한 3차원 스키 모델을 개발하여 실제 주행데이터와 비교 검증함으로써 최적화된 스키 궤적 알고리즘 제공이 필요하다.

• 한국컴퓨터정보학회논문지
• /
• 제20권3호
• /
• pp.89-96
• /
• 2015

IT 기술이 생체역학 분야와 폭넓게 접목되고 있으며 AHRS 센서가 스포츠 모션분석 분야에 소형화 및 가격 경쟁력 측면에서 조명을 받고 있다. 본 논문에서는 피겨스케이트화에 소형의 AHRS 센서를 부착하고, 스핀(spin), 점프, 전/후진, 인/아웃 에지, 토(toe) 등의 기본 동작을 AHRS를 통해 측정한다. AHRS 센서의 측정 오차를 줄이기 위해 Madgwick의 상보필터를 적용하였으며, 짐벌락 현상(Gimbal Lock)을 줄이기 위해 쿼터니언(Quaternion)을 이용하였다. 취득한 9축 궤적 정보에 대해 PCA, ICA, LDA, SVM의 패턴인식 알고리즘을 적용하여 인식정확도 및 실행시간을 구하고, 여러 패턴인식 알고리즘 중에서 어떤 알고리즘이 인식정확도 및 실행시간 측면에서 적용이 가능한지 제시한다. 실험결과, PCA, ICA는 인식정확도가 낮아 사용하기에 부적합하며 LDA, SVM은 인식정확도가 우수하여 피겨스케이팅 기본 동작 인식에 사용이 적합함을 보인다.