• Journal of Positioning, Navigation, and Timing
• /
• 제5권3호
• /
• pp.137-144
• /
• 2016

In this paper, the performance of ranging measurement, which is generated using two receiver clock offsets in one receiver, was analyzed. A spoofer transmits a counterfeited spoofing signal which is similar to the GPS signal with hostile purposes, so the same tracking technique can be applied to the spoofing signal. The multi-correlator can generate two receiver clock offsets in one receiver. The difference between these two clock offsets consists of the path length from the spoofer to the receiver and the delay of spoofer system. Thus, in this paper, the ranging measurement was evaluated by the spoofer localization performance based on the time-of-arrival (TOA) technique. The results of simulation and real-world experiments show that the position and the system clock offset of the spoofer could be estimated successfully.

• 제어로봇시스템학회논문지
• /
• 제19권2호
• /
• pp.113-118
• /
• 2013

In this paper, spoofing effects on a GNSS receiver were analyzed. The spoofer (spoofing device) was classified to two categories. One is an active spoofer and the other is a passive spoofer. The active spoofer was considered for analysis. For the analysis of spoofing effects on a GNSS receiver, a real-time GNSS spoofing simulator was developed. The simulator was consisted with two parts which are a baseband signal generation part and a RF up-conversion part. The first GNSS baseband signal was generated according to spoofing parameters such as range, range rate, GNSS navigation data, spoofing to GNSS signal ratio, and etc. The generated baseband signal was up-converted to GNSS L1 band. Then the signal transmitted to a GNSS signal. For a perfect spoofing, a spoofer knew an accurate position and velocity of a spoofing target. But, in real world, that is not nearly possible. Although uncertainty of position and velocity of the target was existed, the spoofer was operated as an efficient jammer.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권3호
• /
• pp.169-177
• /
• 2021

In this paper, we propose a novel global navigation satellite system (GNSS) spoofing detection technique through an array antenna-based direction of arrival (DoA) estimation of satellite and spoofer. Specifically, we consider a sophisticated GNSS spoofing attack scenario where the spoofer can accurately mimic the multiple pseudo-random number (PRN) signals since the spoofer has its own GNSS receiver and knows the location of the target receiver in advance. The target GNSS receiver precisely estimates the DoA of all PRN signals using compressed sensing-based orthogonal matching pursuit (OMP) even with a small number of samples, and it performs spoofing detection from the DoA estimation results of all PRN signals. In addition, considering the initial situation of a sophisticated spoofing attack scenario, we designed the algorithm to have high spoofing detection performance regardless of the relative spoofing signal power. Therefore, we do not consider the assumption in which the power of the spoofing signal is about 3 dB greater than that of the authentic signal. Then, we introduce design parameters to get high true detection probability and low false alarm probability in tandem by considering the condition for the presence of signal sources and the proximity of the DoA between authentic signals. Through computer simulations, we compare the DoA estimation performance between the conventional signal direction estimation method and the OMP algorithm in few samples. Finally, we show in the sophisticated spoofing attack scenario that the proposed spoofing detection technique using OMP-based estimated DoA of all PRN signals outperforms the conventional spoofing detection scheme in terms of true detection and false alarm probability.

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.296-303
• /
• 2010

The term "spoofing" refers to the transmission of counterfeit signals to provide undetectable falsification of GPS service. A spoofing can be accomplished using information from open literature which defines the signal format and the data structure. Spoofing is intended either to produce erroneous navigation solutions or saturate the processor of the victim receiver. The GPS receiver has no way to get rid of the effect of a spoofing because GPS receivers for civil service do not have an anti-spoofing scheme. This paper analyzes the spoofing characteristics, spoofing methods and environment conditions. And the spoofing effects on GPS receiver are analyzed in detail using the designed software-based spoofer and the Nordnav receiver.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.793-800
• /
• 2010

GPS spoofing is an intentional interference which uses the mimic GPS signals to fake the receivers. The generic GPS receiver is hard to recognize the spoofing signal because the spoofer generates the fake signals as close as possible to the GPS signal. So the spoofer can do critical damage to public operations. This paper introduces a basic concept of spoofing and analyzes the effect of the spoofing signal to the GPS receiver. Also for stand-alone GPS receivers, two anti-spoofing methods are implemented : RAIM based method and the SQM based method. To evaluate the performance of anti-spoofing method, the software based spoofing signal generator and GPS signal generator are implemented. The performance of the anti-spoofing methods obtained using the output of the software based GPS receiver shows that SQM based method is more effective when multiple spoofing signals exist.

• 제어로봇시스템학회논문지
• /
• 제21권3호
• /
• pp.283-289
• /
• 2015

In this paper, a GNSS interference detection algorithm based on an adaptive fading Kalman filter is proposed to detect a spoofing signal which is one of the threatening GNSS intentional interferences. To detect and mitigate the spoofing signal, the fading factor of the filter is used as a detection parameter. For simulation, the effect of the spoofing signal is modeled by the ramp type bias error of the pseudorange to emulate a smart spoofer and the change of the fading factor value according to ramp type bias error is quantitatively analyzed. In addition, the detection threshold is established to detect the spoofing signal by analyzing the change of the error covariance and the effect of spoofing is mitigated by controlling the Kalman gain of the filter. To verify the performance analysis of the proposed algorithm, various simulations are implemented. Through the results of simulations, we confirmed that the proposed algorithm works well.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권2호
• /
• pp.57-65
• /
• 2015

Global Navigation Satellite System (GNSS) including Global Positioning System (GPS) is an important element for navigation of both the military and civil Unmanned Aerial Vehicle (UAV). Contrary to the military UAVs, the civil UAVs use the civil signals which are unencrypted, unauthenticated and predictable. Therefore if the civil signals are counterfeited, the civil UAV’s position can be manipulated and the appropriate movement of the civil UAV to the target point is not achieved. In this paper, spoofing on the autonomous navigation UAV is implemented through field experiments. Although the demanded conditions for appropriate spoofing attack exists, satisfying the conditions is restricted in real environments. So, the Way-point of the UAV is assumed to be known for experiments and assessments. Under the circumstances, GPS spoofing signal is generated based on the Software-based GNSS signal generator. The signal is emitted to the target UAV using the antenna of the spoofer and the effect of the signal is analyzed and evaluated. In conclusion, taking the UAV to the target point is hardly feasible. To implement the spoofing as expectation, the position and guidance system of the UAV has to be known. Additionally, the GPS receiver on the UAV could be checked whether it appropriately tracks the spoofing signal or not. However, the effect of the spoofing signal on the autonomous UAV has been verified and assessed through the experimental results. Spoofing signal affects the navigation system of the UAV so that the UAV goes off course or shows an abnormal operation.

• 한국항행학회논문지
• /
• 제17권2호
• /
• pp.157-164
• /
• 2013

일반적으로 기만신호는 GPS 신호보다 세기가 강한 신호이기 때문에 기만신호가 가해졌을 경우 GPS 신호의 정보를 획득하기는 어렵다. 특정 위성에 대한 기만신호가 발생하면 위성신호 획득시 도플러 주파수와 코드 페이스의 2차원 공간에 두 개의 피크가 존재하게 된다. 이를 이용하여 기만신호 존재 여부를 판단하고 각각의 신호획득 결과에 대한 채널 정보를 바탕으로 신호추적과정을 수행하여 기만신호를 제외한 GPS 신호를 활용할 수 있다. 본 논문에서는 의사위성 시뮬레이터를 이용하여 현재 가시위성 중 하나의 PRN에 대한 기만신호를 생성한 다음 소프트웨어 수신기를 이용하여 두 번의 신호획득 과정을 수행하여 두 개의 피크를 검출하고 각각에 대한 신호추적 이후 정상적인 GPS 신호의 결과를 추출할 수 있음을 확인하였다.

• 한국위성정보통신학회논문지
• /
• 제8권2호
• /
• pp.29-35
• /
• 2013

본 논문에서는 GPS L1 신호에 대한 기만의 종류 및 이를 검출하기 위한 방법에 대한 연구를 수행하고 GPS L1 신호에 대한 기만신호 검출 및 판단 알고리즘을 구현한 후 시뮬레이션을 통하여 성능을 분석하였다. 수신기의 동작 여부에 따라 기만과 재밍신호가 차이가 있으며 기만신호는 재밍신호와 달리 GPS 신호와 유사한 신호로 수신기를 공격하므로 기만 대상 수신기에서는 정상동작하는 것처럼 판단하게 되며 따라서 수신기에서 기만공격을 판단하기란 매우 어렵다. 기만신호 검출 및 판단 알고리즘의 성능을 검증하기 위하여 소프트웨어 기반의 기만신호/정상 GPS 신호생성기와 소프트웨어 기반의 수신기를 구현하였다. 본 논문에서 기만신호의 코드지연 및 도플러 주파수 변이에 따른 수신기의 DLL/PLL의 출력 오차를 확인하였다. 또한 수신기의 출력값인 의사거리, 신호세기, 항법해를 이용하여 기만신호 검출 및 판단 알고리즘을 구현하였으며 기만신호를 효율적으로 검출 및 판단할 수 있었다.