• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1414-1419
• /
• 2015

A method for detecting a skin region on the image is generally used to detect the color information. However, If saturation lowered, skin detection is difficult because hue information of the pixels is lost. So in this paper, we propose a method of correcting color of lower saturation of skin region images by the lighting. Color correction process of this method is saturation image acquisition and low-saturation region classification, segmentation, and the saturation of the split in the low saturation region extraction and color values, the color correction sequence. This method extracts the low saturation regions in the image and extract the color and saturation in the region and the surrounding region to produce a color similar to the original color. Therefore, the method of extracting the low saturation region should be correctly preceding. Because more accurate segmentation in the process of obtaining a low saturation regions, we use a multi-threshold method proposed Otsu in Hue values of the HSV color space, and create a binary image. Our experimental results for 170 portrait images show a possibility that the proposed method could be used efficiently preprocessing of skin color detection method, because the detection result of proposed method is 5.8% higher than not used it.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1012-1018
• /
• 2018

In this paper, CMOS SAR (Successive Approximation Register) A/D converter with 1.8V supply voltage is designed for IoT sensor processing. This paper proposes design of a 12-bit SAR A/D converter with two A / D converters in parallel to improve the sampling rate. A/D converter1 of the two A/D converters determines all the 12-bit bits, and another A/D converter2 uses the upper six bits of the other A/D converters to minimize power consumption and switching energy. Since the second A/D converter2 does not determine the upper 6 bits, the control circuits and SAR Logic are not needed and the area is minimized. In addition, the switching energy increases as the large capacitor capacity and the large voltage change in the C-DAC, and the second A/D converter does not determine the upper 6 bits, thereby reducing the switching energy. It is also possible to reduce the process variation in the C-DAC by proposed structure by the split capacitor capacity in the C-DAC equals the unit capacitor capacity. The proposed SAR A/D converter was designed using 0.18um CMOS process, and the supply voltage of 1.8V, the conversion speed of 10MS/s, and the Effective Number of Bit (ENOB) of 10.2 bits were measured. The area of core block is $600{\times}900um^2$, the total power consumption is $79.58{\mu}W$, and the FOM (Figure of Merit) is 6.716fJ / step.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.12
• /
• pp.431-438
• /
• 2020

In this paper, the method to extract lip contour by multiple threshold is proposed. Spyridonos et. el. proposed a method to extract lip contour. First step is get Q image from transform of RGB into YIQ. Second step is to find lip corner points by change point detection and split Q image into upper and lower part by corner points. The candidate lip contour can be obtained by apply threshold to Q image. From the candidate contour, feature variance is calculated and the contour with maximum variance is adopted as final contour. The feature variance 'D' is based on the absolute difference near the contour points. The conventional method has 3 problems. The first one is related to lip corner point. Calculation of variance depends on much skin pixels and therefore the accuracy decreases and have effect on the split for Q image. Second, there is no analysis for color systems except YIQ. YIQ is a good however, other color systems such as HVS, CIELUV, YCrCb would be considered. Final problem is related to selection of optimal contour. In selection process, they used maximum of average feature variance for the pixels near the contour points. The maximum of variance causes reduction of extracted contour compared to ground contours. To solve the first problem, the proposed method excludes some of skin pixels and got 30% performance increase. For the second problem, HSV, CIELUV, YCrCb coordinate systems are tested and found there is no relation between the conventional method and dependency to color systems. For the final problem, maximum of total sum for the feature variance is adopted rather than the maximum of average feature variance and got 46% performance increase. By combine all the solutions, the proposed method gives 2 times in accuracy and stability than conventional method.

• Trans-
• /
• v.7
• /
• pp.19-48
• /
• 2019

This study was described to examine the meaning of the media exhibition work <70mK>, which aims to capture the topography of the collective consciousness of the Korean people through large-scale interviews. <70mK> edits and organizes interview images of individual beings in mosaic-like layouts and forms, creating video exhibitions and holding exhibitions. The objects in the split frame show the continuity of differences that reveal their own thoughts and personalities. This is a synchronic and conscious collective typology in which the intrinsic nature of the individuals is embodied in a simultaneous and holistic image. Interview images reveal their own form as a actual being and convey the intrinsic nature of one's own as oral information. <70mK> constructs a new individualization by aesthetically structuring the forms and information of life individuals in the extension of a specific group. The beings in the frame are not communicating with each other and are looking straight ahead. it conveys to visitors their relationship and personality as the preindividual reality. It is the repetitive arrangement and composition of heterogeneity and difference that each individual shows, and is a chain operation that includes collective identity behind it. <70mK> constructs the direct images and sounds of individual interviewee, creating a new form of information transfer called Video Art Exhibition. This makes metaphors and perceptions of the meaning and process of transindividual relationships and the meaning of psychic individuation and collective individuation. This is an appropriate case to explain with modern technology and individualization of Gilbert Simondon thought together with the meaning of becoming and relation of individualization. The exhibition space constructed by <70mK> is an aesthetic methodology of the psychic and collective meaning and its relationship to a particular group of individuals through which they are connected. Simondon studied the meaning of the process of individualization and the meaning of becoming, and is a philosopher who positively considered the potential of modern technology. <70mK> is a new individual as structured and generated ethical reality mediated by modern technology mechanisms and network behaviors. It is an case of an aesthetic and practical methodology of how interviews function as 'transduction' in the process of individualization in which technology is cooperated. The direct images and sounds of <70mK> are systems in which the information of life individuals is carried, amplified, accumulated and transmitted. It is also a new individual as a psychic and collective landscape. It is a newly became exhibition art work through the multiple individualization, and is a representation of transindividual meanings and process. The media exhibition art of individualized metastable states leads to new relationships in which viewers perceive the same preindividual reality and feel affectivity. The exhibition space of <70mK> becomes a stage for preparing the actual possibility of the transindividual group beyond the representation of the semantic function.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.4
• /
• pp.301-307
• /
• 2004

The flap considered at first for the reconstruction of large maxillary defect, especially mid-face defect, is scapular free flap, because it provides ample composite tissue which can be designed 3-dimensionally for orbital, facial and oral reconstruction. In case of maxillary defect involving hard palate, however, this flap has some limitations. First, its bulk prevents oral function and physio-anatomic reconstruction of nasal and oral cavity. Second, mobility and thickness of cutaneous paddle covering the alveolar area reduce retention of tissue-supported denture and give rise to peri-implantitis when implant is installed. Third, lateral border of scapula that is to reconstruct maxillary arch and hold implants is straight, not U-shaped maxillary arch form. To overcome these problems, new concept of step prefabrication technique was provided to a 27-year-old male patient who had been suffering from a complete hard palate and maxillary alveolar ridge defect. In the first stage, scapular osteomuscular flap was elevated, tailored to fit the maxillary defect, particulated autologous bone was placed subperiosteally to simulate U-shaped alveolar process, and then wrapped up with split thickness skin graft(STSG, 0.3mm thickness). Two months later, thus prefabricated new flap was elevated and microtransferred to the palato-maxillary defect. After 6 months, 10 implant fixtures were installed along the reconstructed maxillary alveolus, with following final prosthetic rehabilitation. The procedure was very successful and patient is enjoying normal rigid diet and speech.

• Clinical and Experimental Reproductive Medicine
• /
• v.42 no.2
• /
• pp.45-50
• /
• 2015

Objective: Artificial oocyte activation (AOA) is an effective method to avoid total fertilization failure in human in vitro fertilization-embryo transfer (IVF-ET) cycles. AOA performed using a calcium ionophore can induce calcium oscillation in oocytes and initiate the fertilization process. We evaluated the usefulness of AOA with a calcium ionophore in cases of total fertilization failure in previous cycles and in cases of severe male factor infertility patients with non-motile spermatozoa after pentoxifylline (PF) treatment. Methods: The present study describes 29 intracytoplasmic sperm injection (ICSI)-AOA cycles involving male factor infertility at Cheil General Hospital from January 2006 to June 2013. Patients were divided into two groups (control, n=480; AOA, n=29) depending on whether or not AOA using a calcium ionophore (A23187) was performed after testicular sperm extraction-ICSI (TESE-ICSI). The AOA group was further split into subgroups according to sperm motility after PF treatment: i.e., motile sperm-injected (n=12) and non-motile sperm-injected (n=17) groups (total n=29 cycles). Results: The good embryo rate (52.3% vs. 66.9%), pregnancy rate (20.7% vs. 52.1%), and delivery rate (10.3% vs. 40.8%) were lower in the PF/AOA group than in the control group. When evaluating the effects of restoration of sperm motility after PF treatment on clinical outcomes there was no difference in fertilization rate (66.6% vs. 64.7% in non-motile and motile sperm, respectively), pregnancy rate (17.6% vs. 33.3%), or delivery rate (5.9% vs. 16.7%) between the two groups. Conclusion: We suggest that oocyte activation is a useful method to ensure fertilization in TESE-ICSI cycles regardless of restoration of sperm motility after PF treatment. AOA may be useful in selected patients who have a low fertilization rate or total fertilization failure.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.823-829
• /
• 2002

The composite frame system with reinforced concrete column and steel beam has some advantages in the structural efficiency by complementing the shortcomings between the two systems. The system, however has also a lot of problems in practical design and construction process due to the material dissimilarities. Considering these circumstances, this research is aimed at the development of the composite structural system which enables the steel beams to be connected to the R/C columns with higher structural safety and economy. Basically the proposed connection system is composed of four split tees, structural angles reinforced by stiffener, high strength steel rods, connecting plates and shear plates. The structural tests have been carried out to verify the moment transfer mechanism from beam flange to steel rods or connecting plates through the angle reinforced by siffener. The four prototype specimens have been tested until the flange of beam reached the plastic states. From the tests, no distinct material dissimilarities between concrete and steel have been detected and the stress transfer through wide flange beam - structural angle - high strength steel rod or connecting plate is very favorable.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.107-115
• /
• 2011

In this paper, we proposed fast and efficient algorithm for detecting near-duplication based on content based retrieval in large scale video database. For handling large amounts of video easily, we split the video into small segment using scene change detection. In case of video services and copyright related business models, it is need to technology that detect near-duplicates, that longer matched video than to search video containing short part or a frame of original. To detect near-duplicate video, we proposed motion distribution and frame descriptor in a video segment. The motion distribution descriptor is constructed by obtaining motion vector from macro blocks during the video decoding process. When matching between descriptors, we use the motion distribution descriptor as filtering to improving matching speed. However, motion distribution has low discriminability. To improve discrimination, we decide to identification using frame descriptor extracted from selected representative frames within a scene segmentation. The proposed algorithm shows high success rate and low false alarm rate. In addition, the matching speed of this descriptor is very fast, we confirm this algorithm can be useful to practical application.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.115-131
• /
• 2000

In the study of craniofacial deformity, it is very important that identifying the factor which can affect the morphology and which is closely related to the morphology, because it can not only improve the comprehension of growth and developmental process but also be applied in growth prediction and treatment modality. Several investigators have already mentioned the characterstics of head posture and airway space in relations to morphologic difference. But it is very meaningful work in clarifying the correlation between morphology, head posture and airway space that observing the change of head posture after morplologic change caused by operation and the change of airway space after same procedure. To investigate above correlation, I selected normal group which is consisted of 43 adults and mandibular prognathism group which is consisted of 47 adults who had been operated by sagittal split ramus osteotomy and were followed up more than 1 year. With their lateral skull radiograghs, reference lines which can evaluate each measuring points and areas without effect of postural change were first determined. And using above reference lines, change of airway space, positional change of tongue and hyoid, change of cranial and cervical angulations were measured. The results obtained from the study were as follows 1. In the change of head posture, the position of tongue and hyoid neighboring to pharynx is more closely related to the reference line of cervical column than to reference line of cranium. 2. After mandibular setback operation, the airway dimension was decreased to 81.6% of preoperative state at 1 month postoperatively and was slightly increased to 89.7% at 1 year postoperatively. 3. Posterior movement of tongue plays important role in decrease of airway dimension and inferior movement of hyoid was closely correlated with posterior movement of tongue. 4. Postoperative anterior movement of mandible, namely, morphologic relapse had correlation with relapse phenomenon of airway dimension. 5. Craniocervical angulation increased postoperatively. Especially in the postoperative early state, there was increased foreward inclination of cervical angulation rather than increase of cranial angulation. But at postoperative 1 year it was observed that cervical inclination was returned to preoperative state and cranial angulation was increased gradually. 6. Increase rate of airway dimension was correlated with the increase of cranial angulation from postoperative 1 month to 1 year. In conclusion, relapse tendency of airway dimension following increase of cranial angulation was found after mandibular setback operation and it is considered that increase of cranial angulation is one of compensatory mechanism in airway maintenance.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.81-93
• /
• 2011

This research deals with the multi-modal continuous network design problem to resolve the transportation policy problems for constructing and operating transportation facilities with considering the mutual decision-making process between transportation operator and user in the multi-modal network. Particularly, in the consideration of changes in travel pattern between transport modes due to the changes in transportation policy, road network for passenger car and transit network for public transportation are considered together. In the development of network design model, more rational Stackelberg equilibrium(cooperative game) rather than more general Nash equilibrium(non-cooperative game) approach is used and sensitivity analysis considering transport mode is used. A multi-modal continuous network design model in this study is developed for the arbitrary continuous network design parameters(${\epsilon},\hat{\epsilon},p$) of transportation policy decisions. As examples of application and evaluation for these design parameters, the developed model is applied to calculate 1)the optimal capacity of road link in the road transport policy, 2)the optimal frequency of transit line in public transport policy and 3)the optimal modal split in transport modal share policy.