• 한국추진공학회지
• /
• 제17권2호
• /
• pp.9-15
• /
• 2013

Shchelkin 나선으로 알려진 나선형 난류고리가 아세틸렌-산소 혼합기의 데토네이션파의 성능에 미치는 영향을 실험적으로 연구하였다. 고속응답 압력 트랜스듀서로 측정된 압력 피크의 시간차를 이용하여 데토네이션파 속도를 산출하였다. 또한 추력대를 이용해 데토네이션파의 강도를 측정하여 나선형 난류고리가 연소성능에 미치는 영향을 분석하였다. CFD를 이용하여 간접적으로 유량을 산출하고, 최대 충진률을 위한 최소 충진시간을 도출하였다. 아세틸렌-산소 추진제의 당량비 2.4에서 최대속도 및 압력을 나타냈으며, CEA로 계산된 C-J 속도와 유사한 값을 보였다. 짧은 연소기와 짧은 나선형 난류고리를 사용하는 경우에 최대의 데토네이션파 속도를 나타냈지만, 반대로 난류고리를 사용하지 않은 긴 연소기에서 최대 추력성능을 보였다.

• 한국가시화정보학회지
• /
• 제7권2호
• /
• pp.72-72
• /
• 2010

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1002-1007
• /
• 2009

The research are performed to check the characteristics of the ice slurry transport system for the district cooling. The system are installed at the 1st floored building which is as large as the $1204\;m^2$ ($86\;m{\times}14\;m$). Three kinds of heat exchanger are selected, such as, plate, spiral and shell & tube type, to apply to the ice slurry systems. Experiment was done in the two cases. The first case, circulation water flow fixed at the design conditions for the state to change the flow of the supply of ice slurry. The second case, Ice slurry flow fixed at the design conditions for the state to change the flow of circulation water. Both side of Energy balance was calculated. The performance of plate heat exchanger is higher than others and it's enthalpy effectiveness is higher too.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2143-2145
• /
• 1999

Measurements of wind noise, generated by High-voltage overhead transmission lines placed in a uniform flow are carried out in the Anechoic windtunnel. High-voltage overhead transmission lines generates audible wind noise, which cause a serious environment problem. Accordingly, wind noise has become one of major concerns for design engineers and operations personnel. In the present research, tests were mainly performed with various configuration of transmission line with spiral wires. Remarkable noise reduction was observed for some of the spiral transmission lines, compared with the noise generated without the spiral wire.

• 설비공학논문집
• /
• 제24권4호
• /
• pp.336-342
• /
• 2012

Large-scale active solar heat systems are generally using heat exchanger between collector and storage tank loops to prevent damage by freezing. It is difficult to maintain stratification in a storage tank in the system owing to greater flow rate enhancing heat transfer. In the previous study, we introduced a spiral-jacketed storage tank and obtained good results to keep system performance of general level without better stratification. We added a scroll-shaped heat exchanger coil on the upper part in the spiral-jacketed storage tank. As a result of the experiment, it was verified that degree of stratification of the new type storage tank is higher than that of the previous one with a possibility of better collector efficiency and solar fraction.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2004년도 하계학술발표 논문집
• /
• pp.170-170
• /
• 2004

• International Journal of Fluid Machinery and Systems
• /
• 제2권3호
• /
• pp.239-247
• /
• 2009

Sewage pumps are designed with a wide flow channel by, for example, sacrificing some efficiency and reducing the number of blades, in order to prevent plugging with foreign bodies. However, the behavior of foreign bodies which actually flow into a pump is extremely complex, and there are questions about whether the presumed foreign bodies will actually pass through. This paper proposes a new type of sewage pump impeller designed to further improve pump efficiency and performance in passing foreign bodies. This sewage pump impeller has a structure in which the suction flow channel of a closed type non-clog pump is wound in a helical spiral. The focus of this research was to investigate pump performance and internal flow in this single blade sewage pump impeller. The results clearly indicated the following facts: The developed sewage pump impeller exhibits high efficiency over a wide range of flow rates; internal flow of the pump is very complicated; and the internal flow state varies greatly when the flow rate changes.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.583-589
• /
• 2004

One of noticeable features in the cross flow fan is that a working fluid passes through impeller blade twice without distinction between the inlet and exit angles. Also, it does produce higher circumferential velocity than other types of blade at the same flow rate in accordance with the application of the forward curved shape. However, a design theory for the cross-flow fan has not yet been formed owing to an eccentric vortex, which is the remarkable characteristics, occurred in a cross-flow fan. Furthermore, the eccentric vortex, which is difficult to control of the size and position, is the important cause of performance decrease. In this study, experiments are carried out to estimate the similarity of the cross-flow fan with various scales and rotational velocity changes. Pressure coefficients to flow coefficients with various scales of the cross-flow fan are plotted to research the application of the general similarity law of the turbomachinery in the cross-flow fan with Archimedes spital, which is the important factor haying an effect on it.

• 대한기계학회논문집B
• /
• 제35권3호
• /
• pp.269-278
• /
• 2011

본 연구에서는 구리 재질의 평판 핀과 나선형 핀-관 열교환기에 대하여 핀 피치와 열수의 변화에 따른 공기측 전열성능을 검토하였다. 두 형상 모두 핀 피치가 열전달계수에 미치는 영향은 미미하였다. 마찰인자는 핀 피치가 증가하면 증가하였다. 열수가 미치는 영향은 형상에 따라 다르게 나타났다. 평판 핀-관 열교환기의 경우 열전달계수는 열수가 증가할수록 감소하였다. 하지만 나선형 핀-관 열교환기의 열전달 계수는 열수가 증가하면서 그 값이 증가하는 경향을 보였다. 평판 핀-관 열교환기의 열전달계수는 나선형 핀-관 열교환기의 열전달계수보다 높게 나타났다. 하지만 열수가 증가하면 그 차이가 줄어들어 4열이 되면 거의 같았다. 한편 마찰인자는 평판 핀-관 열교환기에서 다소 높게 나타나고 열수의 영향은 크지 않았다. 본 실험 데이터를 기존 상관식의 예측치와 비교하였다.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.118-123
• /
• 2017

It is well known that water jetting is now widely used in the advanced cutting processes of polymers, metals, glass, ceramics, and composite materials because of some advantages, such as heatless and non-contacting cutting different from the laser beam machining. In this paper, we proposed the simulation model of waterjet by lengths and the inner spiral structure of the nozzle. The simulation results show that the outlet velocity of the nozzle is faster than the inlet. Furthermore, we found rapid velocity reduction after passing through the outlet. The nozzle of diameter ${\phi}500$ and length 70mm, shows the optimal fluid width and velocity distribution. Also, the nozzle with inner spiral structure shows a Gaussian distribution of velocity and this model is almost twice as fast as the model without spiral structure, within the effective standoff distance (2.5 mm). In the future, when inserting abrasive material into the waterjet, we plan to analyze the fluid flow and the particle behavior through a simulation model.