• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.7-15
• /
• 2003

Spinning Rotor Gauge (SRG) has been used to transfer standard gauge for international comparison at the high vacuum standards. We calibrated a spinning rotor gauge by using dynamic calibration system (DCS) that was a national high vacuum standards system. And its uncertainties were evaluated with the International Organization for Standardization (ISO), they were recognized ai A type uncertainty, B type uncertainty, combined Standard uncertainty, and expanded uncertainty. The combined standard uncertainties were $1.8007\times10^{-5}$ Pa ~ ~$4.8422\times10^{-5}$ Pa for this spinning rotor gauge.

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.186-194
• /
• 2005

A Spinning Rotor Gauge was calibrated between $4.04\times10^{-3}$ Pa and $1.11\times10^{-2}$ Pa at the high vacuum standard by static expansion method. The results were analysed according to the document of 'Guide to the Expression of Uncertainty in Measurement' of ISO. The expanded uncertainty was $3.0035\times10^{-3}$ Pa at $7.5448\times10^{-3}$ Pa. $95\%$ confidence level, and coverage factor of k = 1.

• Journal of the Korean Vacuum Society
• /
• v.3 no.4
• /
• pp.382-388
• /
• 1994

포항가속기연구소에서 사용될 진공게이지 교정시스템이 설계 제작되었다. 이 교정시스템은 동적 교정방법으로 설계되었으며 transfer standard 로서 spinning rotor gauge를 사용하였다. 포항가속기의 저장리에 사용될 모든 진공게이지는 교정시스템으로 교정을 하여 사용할 것이며, 주로 교정할 게이지로 는 Bayard-Alpert(BA) nude ionization gauge와 cold cathode gauge등이 있다. 본 논문에서는 포항가속 기의 진공게이지 교정시스템에 대해서 소개를 하였고 현재까지 BA nude ioni-zation gauge 6대 extractor gauge 1대 high pressure gauge 1대와 cold cathode gauge 5대를 10-4에서 10-4 Torr 범위내 에서 교정하여 그 결과를 보였다.

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.135-141
• /
• 1995

Spinning Rotor Gauge(SRG)를 전달표준기(transfer standard gauge)로 사용하여 한국표준과학연구원(KRISS)의 고진공표준과 이태리 표준연구소인 IMGC(Istituto 야 Metrologia Gustavo Colonnetti)고진공표준의 국제비교를 실시하였다. 그 방법은 SRG의 accommodation coefficient(s)를 각 연구실의 고진공표준기로 측정하여 그 결과를 비교하였다. 이 결과 두 기관에서 교정한 SRG 볼의 $\sigma$값의 평균차이는 0.696%로서 양국의 고진공표준은 오차범위내에서 일치하는 것으로 나타났다.

• Journal of the Korean Vacuum Society
• /
• v.2 no.1
• /
• pp.1-8
• /
• 1993

당 연구실에서 개발 제작된 동적교정방법을 이용한 고진공표준기를 사용하여 10-6∼10-3torr 영역에서 가장 널리 쓰이는 spinning rotor gauge와 열음극전리 진공게이지들의 특성을 상품화되어 사용되는 방법대로 측정하여 조사하여 보았다. 게이지들의 직선성, 단기간(15일)에 행해진 반복측정에서의 scattering을 조사하였고 또한 N2, CO, He, H2, O2, Ar 가스에 대한 감도와 압력을 올릴 때와 내릴 때의 hysteresis를 조사하였다.

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.293-297
• /
• 1997

Using trace etching method in this study, we measure the energy of argon ions generated in VEBA System which is composed of Marx Generater and Pulse Forming Line. In this system the electron beam of 240 kV, 30 kA, 60 ns is generated. Argon ions are formed through the electron beam ionization of a gas cloud injected by a fast puff valve. Thus argon ions are accelerated into vacuum drift tube by a virtual cathode and seperated with electron beam, consequently, they heat the trace etching plates made of aluminum thin films. The energy of argon ions are determined by the number of aluminum thin films penetrated by the ions. This experimental value corresponds with the theoretical value.

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.308-313
• /
• 1997

TDS (Thermal Lkso~ption Spectroscopy)system, for diagnosis of CRT manufacturing process, was designed and constructed. Outgassings and themla1 desorptions from the part or materials of CRT can be measured and analysed with this system at various temperatures. The system is consisted of 3 pirrts. vacuum chamher and pumping system with variable conductance, sample heating stages & their controller, and outgassing measurement devices, like as ion gauge or quadrupole mass spectrometer. The ultimate pressure of the system was under $1\times10^{-7}$ Pa. With the variable conductance system, the effective pumping speed of the chamber could he controlled from sub 11s to 100 11s. The effective pumping speed values were determined by dynamic flow measurement principle. The temperatures and ramp rate of sample were controlled by tungsten heater and PID controller up to $600^{\circ}C$ within t $\pm 1^{\circ}C$$difference to setting value. Ion gauge & QMS were calibrated for quantitative measurements. Some examples of TDS measurement data ;ind application on the CRT process analysis were shown.