• 한국농촌건축학회논문집
• /
• 제24권4호
• /
• pp.133-139
• /
• 2022

This study deals with the formation of Jongyeonbangjeok's Gwangju Factory in the 1930's to 80's, and the findings are shown below: In the period of formation, the factory was rectangular-shaped from north to south, and the structure was located at the center of the site, and in the east of it, there was a dormitory connected from south to north. The building was arranged with an open area on the south. In the east of the site where company houses were located, same-sized structures were arranged along the axis.In the period of change, the factory was restored about the damage from the Korean War, and it went through the process of division into two companies. As a result, the factory in the center of the site was divided into left and right ones, and the dormitory and the group of company houses were, too, divided into two, so division was made largely into southern and northern parts. In the period of stabilization, along with factory extension in each of the companies, welfare for factory workers was expanded by building more houses or opening sport facilities. After the 1980's, too, the existing factories were either extended or remodeled according to the induction of equipment, and some showed changes in their functions due to a fire or such.

• 전자공학회논문지
• /
• 제53권5호
• /
• pp.152-159
• /
• 2016

본 논문은 CMOS 자기센서(hall Sensor)의 오프셋 및 1/f 잡음 제거기술 기반 고선형 자기센서 신호처리장치를 제안한다. 제안하는 자기센서는 자계(magnetic Field)를 감지하여 자계의 변화량에 따른 홀 전압(hall Voltage)을 출력하는 홀 플레이트(hall Plate)와 홀 플레이트 출력 신호의 오프셋과 1/f 잡음 제거 및 디지털화를 위한 자기센서 신호처리시스템으로 구성된다. 자기센서 신호처리 시스템은 스피닝 전류 바이어싱(spinning current biasing)을 통해 자기신호로부터 오프셋과 1/f잡음 성분을 분리하고, 초퍼 및 증폭기를 통해 자기신호를 100 kHz 주파수 대역으로 변조한다. 60 kHz 차단주파수를 갖는 고역통과필터(highpass filter)를 사용하여 오프셋 및 1/f 잡음을 제거한뒤 ADC(analog to digital converter)를 통해 자기신호만을 디지털 변조한다. 증폭기 및 고역통과필터 출력은 자기신호 -53.9 dBm @ 100 kHz, 잡음성부은 -101.3 dBm @ 10 kHz이다. 최종적으로 ADC를 통과한 자기센서 출력은 -5.0 dBm @ 100 kHz이고, 오프셋 및 1/f 잡음은 -55.0 dBm @ 10 kHz이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.335-336
• /
• 2009

저가격 고효율 실리콘 태양전지를 구현하기 위하여 핵심적으로 적용되는 공정인 SOD(Spin on Doping) 확산공정 최적화에 관하여 연구하였다. n-type 도핑 물질로는 인(P509)을 사용하였으며, Spinning 속도와 Spinning 시간을 각 3000 rpm, 30 초로 고정하고 급속 열처리로에서 확산 온도와 확산 시간을 $800\;^{\circ}C\;{\sim}\;950\;^{\circ}C$, 2 분에서 20 분까지 가변하며 확산공정을 실시하였다. 4-Point Probe 장비로 에미터 표면 저항을 측정한 결과 확산 온도 $850\;^{\circ}C$에서 5분간 열처리 하여 확산 공정을 하였을 때 저가의 고효율 실리콘 태양전지를 구현하는데 적용 하기위한 $30\;{\sim}\;50\;{\Omega}$-sq의 에미터 표면 저항을 만족 시키는 $36\;{\Omega}$-sq의 값을 얻을 수 있었다.

• 한국의류학회지
• /
• 제36권2호
• /
• pp.127-137
• /
• 2012

This study focuses on the optimal washing conditions for dry cleaning recommended fabrics to minimize dimensional changes using wet cleaning. We suggest water-based alternatives to a perchloroethylene based cleaning process. Wool and rayon fabrics were laundered under various washing conditions and then air-dried for 24hrs. All specimens were extended after spinning and shrunk after drying. This is probably because the fibers were swollen and extended by wetting. The wool fabrics were shown to be acutely influenced by washing temperature and mechanical force. The optimal washing conditions for wool fabric to minimize the dimensional change implied a normal washing temperature and minimized mechanical force. For rayon specimens, dimensional change by a hand wash showed a remarkable decrease compared with a machine wash. Rayon fabric seemed to be influenced by the quantity of water contained in the fabric after spinning and washing time. Therefore, the desirable washing conditions for rayon fabric are to reduce the time required for washing and to increase the spin speed.

• 한국염색가공학회지
• /
• 제32권2호
• /
• pp.103-110
• /
• 2020

Super engineering plastic(SEP) are applied to high performance and high value industries due to their excellent mechanical properties and high continuous operating temperature. Among them, PES and PEI are amorphous SEPs, and have the advantages of high flexibility, mechanical properties, transparency, and thermal stability. In this study, polyethersulfone(PES) and polyetherimide(PEI) fibers were manufactured to produce flame retardant artificial hair. PES and PEI fibers prepared through a melt-spinning process at a high temperature of 360 to 420℃. They are compared with commercial artificial hair by thermal gravimetric analysis(TGA), linear density, tenacity, and limited oxygen index(LOI) analysis. PES and PEI fibers have similar linear density and tenacity to commercial artificial hair, while their thermal stability and flame retardant are excellent. In particular, flame retardant was analyzed through LOI value and PES was 35.1%, which is superior to commercial artificial hair PET/Br(28.2%) and PET/P(20.2%). Therefore, PES and PEI are suitable as artificial hair for flame retardant.

• 한국분말재료학회지
• /
• 제12권4호
• /
• pp.303-308
• /
• 2005

Various kinds of Mg-Zn-Ca base alloys were rapidly quenched via melt spinning process. The meltspun ternary and quaternary alloy ribbons were heat-treated, and then the effects of additional elements on age hardening behavior and phase change of precipitates were investigated using Vickers hardness tester, XRD, and TEM equipped with EDS system. In ternary alloys, age hardening was mostly due to the distribution of $Mg_6Ca_2Zn_3$ and $Mg_2Ca$. The stable phases of precipitates were varied according to the aging temperature and the alloy composition. With the increase of Ca content, $Mg_2Ca$ precipitates were detected more than $Mg_6Ca_2Zn_3$ precipitates. In quaternary alloys, the precipitates taken from Mg-Zn-Ca-Co were identified as new quaternary phase, whereas those taken from Mg-Zn-Ca-Zr as MgZnCa containing Zr. In general, the ternary alloy showed higher peak hardness and thermal stability than the quaternary considering the total amounts of the solutes. It implies that the structure of precipitate should be controlled to have the coherent interface with the Mg matrix.

• Fibers and Polymers
• /
• 제1권1호
• /
• pp.37-44
• /
• 2000

A finite element method is employed fer a flow analysis of the melt spinning process of a non-circular fiber, a PET(polyethylene terephthalate) filament. The flow field is divided into two regions of die channel and spin-line. A two dimensional analysis is used for the flow within the die channel and a three dimensional analysis fur the flow along the spin-line. The Newtonian fluid is assumed for the PET melt and material properties are considered to be constant except for the viscosity. Effects of gravitation, air drag force, and surface tension are neglected. Although the spin-line length is 4.5 m only five millimeters from the spinneret are evaluated as the domain of the analysis. Isothermal and non-isothermal cases are studied fer the flow within the die channel. The relationship between the mass flow rate and the pressure gradient is presented for the two cases. Three dimensional flow along the spin-line is obtained by assuming isothermal conditions. It is shown that changes in velocity and cross-sectional shape occur mostly in the region of 1mm from the die exit.

• Macromolecular Research
• /
• 제11권1호
• /
• pp.62-68
• /
• 2003

Thermotropic liquid crystalline polymer (TLCP)/poly(ethylene 2,6-naphthalate) (PEN)/poly(ethylene terephthalate) (PET) ternary blends were prepared by melt blending, and were melt-spun to fibers at various spinning speeds in an effort to improve fiber performance and processability. Structure and property relationship of TLCP/PEN/PET ternary blend fibers and effects of annealing on those were investigated. The mechanical properties of ternary blend fibers could be significantly improved by annealing, which were attributed to the development of more ordered crystallites and the formation of more perfect crystalline structures. TLCP/PEN/PET ternary blend fibers that annealed at 18$0^{\circ}C$ for 2 h, exhibited the highest values of tensile strength and modulus. The double melting behaviors observed in the annealed ternary blend fibers depended on annealing temperature and time, which might be caused by different lamellae thickness distribution as a result of the melting-reorganization process during the DSC scans.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.102-102
• /
• 2003

TLCP/polyester composite fibers (TPCFs) based on melt blends of PEN, PET, and TLCP were prepared by melt blending and spinning process to achieve high performance fibers. Reinforcement effect and TLCP fibrillar structure resulted in improvement of mechanical properties for TPCFs. The increase in the apparent crystallite size was attributed to the development of larger crystallites and more ordered crystalline structures in the annealed TPCFs. Molecular orientation was an important factor to determine mechanical property of TPCFs.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.229-230
• /
• 2007