• Journal of Veterinary Clinics
• /
• v.27 no.4
• /
• pp.491-493
• /
• 2010

Granular cell tumor was described in a 7-year-old male Miniature Pinscher. Sublingual mass was surgically removed and submitted for diagnosis. The mass was about 1.8 cm in diameter, firm, tan, and ulcerated. On histopathology, the mass was unencapsulated and infiltrated adjacent tissue and consisted of nest or sheet of round to polygonal, and occasional spindle-shaped cells. The neoplastic cells contain large amount of eosinophilic granular materials in the cytoplasm. Immunohistochemically, the neoplastic cells were positive to neuron-specific enolase but were negative to S-100. The cytoplasmic eosinophilic granules were positive to PAS but were negative to PTAH methods. Based on these results, the mass was diagnosed as sublingual granular cell tumor. No recurrence or metastasis was noted so far since surgery.

• Korean Journal of Veterinary Research
• /
• v.45 no.3
• /
• pp.387-390
• /
• 2005

An 18-month-old male Alaskan malamute was euthanized due to slowly growing mass around the left femur after history of left posterior limb lameness. At necropsy, a firm confluent mass approximately 15cm in diameter was noted surrounding the femur and proximal portion of the tibia/ulna with traumatic ulceration of the overlying skin. On cross sections of the mass, many unencapsulated firm tan coalescing lobules were noted. The neoplasm consisted of closely packed spindle cells with homogenous eosinophilic material (osteoids) between the neoplastic cells. The pulmonary metastasis was confirmed. Based on the gross and histopathologic examinations, the case was diagnosed as juvenile osteosarcoma.

• Archives of Craniofacial Surgery
• /
• v.13 no.1
• /
• pp.72-75
• /
• 2012

Purpose: Dermatofibroma is a common benign dermal tumor characterized by a proliferation of fibroblast-like spindle cells. It is commonly localized on the skin of extremities and presents as a slow growing solitary nodule. To our knowledge, the occurrence of dermatofibroma in the oral cavity is rare. Herein, we report a rare case of dermatofibroma on the lower lip. Methods: A 60-year-old woman presented with a slow growing mass that measured $1{\times}0.8cm$ in diameter on the lower lip. The mass was surgically excised with clear margins. Results: Histologically, the mass was characterized by a nodular tumor composed of collagen bundles, fibroblasts, and histiocytes, which were findings consistent with dermatofibroma. The postoperative course was uneventful without any complications. Conclusion: When evaluating nodular tumors of the oral area, dermatofibroma should be considered in the differential diagnosis.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.4
• /
• pp.99-105
• /
• 2014

The domestic airline industry undertakes the production of finished products by assembling existing self-described components via a design process which involves assembly and production steps, after which many of the finished products are exported. However, high reliability and stability must be guaranteed, because customers require high-precision components at the time of manufacturing. In the aircraft parts industry, the mass production of high-value-added parts is limited. Therefore, a small production scale depending on the part is used, as many types of conventional CNC lathe machines with X-axis and Z-axis as well as Z-axis and C-axis CNC milling are used. The parts also rely on high-pressure air to increase production. The most important factors are good stability during processing, as high-precision parts are required, as noted above. It was found that as the C-axis rotation speed increased, the diameter of the cutting tool decreased with a decrease in the surface roughness, while the workpiece rotation speed increased with an increase in the surface roughness.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.629-635
• /
• 2009

In this research, KP-4, one of the plastic mold steels, was coated with the AlTiN from one layer to four layers by the PVD method in the $\Phi$ 8mm cemented carbide ball end mill. Coated KP-4 was processed with various conditions. For example, slope of $15^{\circ}$, $30^{\circ}$ and $45^{\circ}$ the spindle rotation speed was changed from 10,000rpm to 16,000rpm, the tool feeding speed was changed from 1,300mm/min to 1,700mm/min, the depth of cut was also changed from 0.3mm to 0.9mm, and etc. Cutting component force according to the coating layer number, and surface roughness were studied. The cutting component force showed a good agreement better the up ward direction than the down ward direction under all experimental conditions. In case of the condition per the material shape, it was lessen when the tool have larger angle because the average effective diameter of the tool is larger. The surface roughness showed good condition in case of the up ward than the down ward direction. And, in the 3rd layer of AlTiN coating, it showed the most suitable condition.

• Journal of ILASS-Korea
• /
• v.10 no.2
• /
• pp.18-31
• /
• 2005

This study was performed to explore the liquid breakup and atomization characteristics for the classification of drop formation mode and background of uniform droplets generation in electrohydrodynmaic atomization according to the change of experimental parameters such as nozzle material (stainless steel. teflon). fluid flow rate, applied electrical field and intensity, and frequency. In results, from the classification map of drop formation modes according to the variation of applied AC voltage and frequency at a stainless nozzle, the droplet size was smaller than the outer diameter of the nozzle tip relatively in the spindle mode. The transition points became clearly to be moved toward the high applied voltage by rising the applied AC frequency beyond 450Hz. Also the droplet radius can be observed quite small in the frequency bandwidth of $350{\sim}450Hz$. The droplet radiuses decrease as the applied voltage increases for a fixed applied AC frequency within the range from 50Hz to 400Hz Over 400Hz, the relation between the power intensity and the droplet size was not consistent with a continuous mechanism of liquid breakup. Thus, it is showed that the droplet size distribution using the teflon nozzle was analogous to the results of stainless steel, but the droplet size was bigger than that of stainless steel relatively in case of a teflon nozzle.

• Transactions of Materials Processing
• /
• v.30 no.3
• /
• pp.125-133
• /
• 2021

In this study, response surface method (RSM), back propagation neural network (BPNN), and genetic algorithm (GA) were used for modeling and multi-objective optimization of the parameters of AA5052-H32 in incremental sheet forming (ISF). The goal of optimization is to determine the maximum forming angle and minimum surface roughness, while varying the production process parameters, such as tool diameter, tool spindle speed, step depth, and tool feed rate. A Box-Behnken experimental design (BBD) was used to develop an RSM model and BPNN model to model the variations in the forming angle and surface roughness based on variations in process parameters. Subsequently, the RSM model was used as the fitness function for multi-objective optimization of the ISF process the GA. The results showed that RSM and BPNN can be effectively used to control the forming angle and surface roughness. The optimized Pareto front produced by the GA can be utilized as a rational design guide for practical applications of AA5052 in the ISF process

• Korean Journal of Veterinary Research
• /
• v.63 no.4
• /
• pp.32.1-32.4
• /
• 2023

Granular cell tumor was described in the testis of two rabbits. Testis from each rabbit was surgically removed and submitted for histopathological diagnosis. Both testes were about 2.0 cm in diameter, firm, and tan. Microscopically, testicular mass consisted of compact sheets of round to polygonal and occasional spindle-shaped cells. The neoplastic cells contain a large amount of eosinophilic granular material in the cytoplasm. The cytoplasmic eosinophilic granules were positive for periodic acid Schiff stain. Immunohistochemically, the neoplastic cells were immunoreactive to Melan-A and vimentin. Based on these results, the testicular mass was diagnosed as a granular cell tumor.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.179-185
• /
• 2008

This study was conducted to determine the characteristics and utilization of pruned kiwifruit branches as wreath materials. Amount of pruned branches produced from one 11~15 year-old kiwi plant cv. 'Hayward' can be used for one wreath with 76cm in diameter. Making a wreath with 76cm in diameter with the pruned kiwifruit branches required 75 branches with 31~40cm length. And the cost to make a wreath with 76cm in diameter for the Keaki and the paper bush were cheeper than those of winged spindle tree and Korean dogwood. Floral designers evaluated that the glossy, the delicacy and the unique form of cut branches, and their various hue were lower than that of the commonly-used cut branches, however, the beauty of curved line, the characteristics after drying, and the utilization and prospect of pruned kiwi branches were higher by 'over good' than that of the commonly-used branches. Consequently, it was assumed that the utilization of pruned kiwifruit branches can be contributed to the improvement of side income for a farm household, and the diversity wreath materials.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.12
• /
• pp.4873-4880
• /
• 2015

Purpose: To describe the clinicopathological features of gastrointestinal stromal tumors (GIST) diagnosed in our section and to perform risk stratification of our cases by assigning them to specific risk categories and groups for disease progression based on proposals by Fletcher et al and Miettinen and Lasota. Materials and Results: We retrieved 255 cases of GIST diagnosed between 2003 and 2014. Over 59% were male. The age range was 16 to 83 years with a mean of 51 years. Over 70% occurred between 40 and 70 years of age. Average diameter of tumors was 10 cms. The stomach was the most common site accounting for about 40%. EGISTs constituted about 16%. On histologic examination, spindle cell morphology was seen in almost of 85% cases. CD117 was the most useful immunohistochemical antibody, positive in 98%. Risk stratification was possible for 220 cases. Based on Fletcher's consensus proposal, 62.3 gastric, 81.8% duodenal, 68% small intestinal, 72% colorectal and 89% EGISTs were assigned to the high risk category; while based on Miettinen and Lasota's algorithm, about 48% gastric, 100% duodenal, 76% small intestinal, 100% colorectal and 100% EGISTs in our study were associated with high risk for disease progression, tumor metastasis and tumor related death. Follow up was available in 95 patients; 26 were dead and 69 alive at follow up. Most of the patients who died had high risk disease and on average death occurred just a few months to a maximum of one to two years after initial surgical resection. Conclusions: Epidemiological and morphologic findings in our study were similar to international published data. The majority of cases in our study belonged to the high risk category.