• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.416-416
• /
• 2016

Organic-inorganic metal halide perovskite solar cells have received attention because it has a number of advantages with excellent light harvesting, high carrier mobility, and facile solution processability and also recorded recently power conversion efficiency (PCEs) of over 20%. The major issue on perovskite solar cells have been reached the limit of small area laboratory scale devices produced using fabrication techniques such as spin coating and physical vapor deposition which are incompatible with low-cost and large area fabrication of perovskite solar cells using printing and coating techniques. To solution these problems, we have investigated the feasibility of achieving fully printable perovskite solar cells by the blade-coating technique. The blade-coating fabrication has been widely used to fabricate organic solar cells (OSCs) and is proven to be a simple, environment-friendly, and low-cost method for the solution-processed photovoltaic. Moreover, the film morphology control in the blade-coating method is much easier than the spray coating and roll-to-roll printing; high-quality photoactive layers with controllable thickness can be performed by using a precisely polished blade with low surface roughness and coating gap control between blade and coating substrate[1]. In order to fabricate perovskite devices with good efficiency, one of the main factors in printed electronic processing is the fabrication of thin films with controlled morphology, high surface coverage and minimum pinholes for high performance, printed thin film perovskite solar cells. Charge dissociation efficiency, charge transport and diffusion length of charge species are dependent on the crystallinity of the film [2]. We fabricated the printed perovskite solar cells with large area and flexible by the bar-coating. The morphology of printed film could be closely related with the condition of the bar-coating technique such as coating speed, concentration and amount of solution, drying condition, and suitable film thickness was also studied by using the optical analysis with SEM. Electrical performance of printed devices is gives hysteresis and efficiency distribution.

• 한국재료학회지
• /
• 제30권3호
• /
• pp.131-135
• /
• 2020

Silver nanowire (AgNW) networks have been adopted as a front electrode in Cu(In,Ga)Se2 (CIGS) thin film solar cells due to their low cost and compatibility with the solution process. When an AgNW network is applied to a CIGS thin film solar cell, reflection loss can increase because the CdS layer, with a relatively high refractive index (n ~ 2.5 at 550 nm), is exposed to air. To resolve the issue, we apply solution-processed ZnO nanorods to the AgNW network as an anti-reflective coating. To obtain high performance of the optical and electrical properties of the ZnO nanorod and AgNW network composite, we optimize the process parameters - the spin coating of AgNWs and the concentration of zinc nitrate and hexamethylene tetramine (HMT - to fabricate ZnO nanorods. We verify that 10 mM of zinc nitrate and HMT show the lowest reflectance and 10% cell efficiency increase when applied to CIGS thin film solar cells.

• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.750-757
• /
• 2002

Photosensitive sol solution을 이용한 self pattern된 박막은 photoresist/dry etching process에 비해 박막의 제조과정이 간단하다는 장점을 가지고 있다. 이 연구에서는 photosensitive sol solution을 이용하여 spin coating법에 의해 $Sr_{0.9}Bi_{2.1}Ta_2O_9$의 조성을 갖는 강유전체 박막을 제조하였으며 출발원료는 $Sr(OC_2H_5)_2,\;Bi(TMHD)_3$와 $Ta(OC_2H_5)_5$를 사용하였다. SBT 박막에 UV 노광시간을 증가시킴에 따라 M-O-M 결합이 생성되면서 metal ${\beta}$-diketonate의 UV 흡수 피크 강도는 감소되었고 SBT 박막에 UV 조사에 따른 용해도 차이가 생기면서 fine patterning을 얻을 수 있었다. 또한 UV가 조사된 SBT 박막의 강유전 특성이 UV가 조사되지 않은 것보다 우수하였다.

• 한국응용과학기술학회지
• /
• 제40권5호
• /
• pp.1116-1125
• /
• 2023

산화아연 막은 투명한 전도성 물질로써 다양한 분야의 광전자소자에 이용되고 있다. 그러므로 산화아연 막의 특성을 규명하는 것은 광전자소자의 성능을 높이는데 매우 중요한 역할을 할 것이다. 본 논문에서는 이러한 산화아연 막을 용액공정 기반으로 제작하여 형태적, 구조적 특성을 평가하고자 한다. 구체적으로는 졸-겔 방법을 반복적으로 시행하여, 시행 횟수에 따른 산화아연 막의 물성의 변화를 관찰할 것이다. 일정한 용액 조건하에서, 5회의 반복적인 졸-겔 방법을 시행한 결과 결정화가 진행되는 것을 확인하였다. 7회 이상에서는 원소 구성 및 결정화도가 특정 값에 수렴하는 경향을 보였다. 최종적인 산화아연 막의 평균결정의 크기는 약 10.7 nm 정도로 계산되었다. 본 연구를 통해 최적의 결정화를 보이는 공정횟수는 7회였다. 본 연구 결과 및 방법론은 다양한 용액공정 변수를 가변시키면서 적용할 수가 있고 최적의 공정조건을 확립하는데 기여할 것으로 기대한다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.205.2-205
• /
• 2003

• 한국재료학회지
• /
• 제14권8호
• /
• pp.542-546
• /
• 2004

We report a new fabrication process for high performance triode type CNT field emitters and their superior electrical properties. The CNT-based triode-type field emitter structure was fabricated by the conventional semiconductor processes. The keys of the fabrication process are spin-on-glass coating and trim-and-leveling of the carbon nanotubes grown in trench structures by employing a chemical mechanical polishing process. They lead to strong adhesion and a uniform distance from the carbon nanotube tips to the electrode. The measured emission property of the arrays showed a remarkably uniform and high current density. The gate leakage current could be remarkably reduced by coating of thin $SiO_{2}$ insulating layer over the gate metal. The field enhancement factor(${\beta}$) and emission area(${\alpha}$) were calculated from the F-N plot. This process can be applicable to fabrication of high power CNT vacuum transistors with good electrical performance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.248-249
• /
• 2005

The tungsten bronze type of strontium barium niobate(SBN) thin film was synthesized by metal organic decomposion method for SBN stock solution and the SBN thin film process were deposited by spin-coating process on Pt-deposited si-wafer(100) by magnetron sputtering system. The thickness of SBN thin film was 150$\sim$200 nm and were optimized for rpm of spin-coater system. The structural variation of SBN thin film was studied by TG-DTA and XRD. The deposited SBN stock solution on annealing at $400\sim800^{\circ}C$ a pure tungsten bronze SBN phase and the corresponding average grain size about 500$\sim$1000 nm influenced by annealing temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.382-383
• /
• 2006

The tungsten bronze type of strontium barium niobate(SBN) thin film was synthesized by metal organic decomposion method for SBN stock solution and the SBN thin film process were deposited by spin-coating process on Pt-deposited si-wafer(100) by magnetron sputtering system. The thickness of SBN thin film was 150~200 nm and were optimized for rpm of spin-coater system. The structural variation of SBN thin film was studied by TG-DTA and XRD. The deposited SBN stock solution on annealing at $400{\sim}800^{\circ}C$ a pure tungsten bronze SBN phase and the corresponding. average grain size about 500~1000 nm influenced by annealing temperature. The piezoelectric properties of prepared SBN thin film, the remanent polarization value(2Pr) and coercive field was $1.2{\mu}C/cm^2$ and 2.15V/cm, respectively.

• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.830-836
• /
• 2017

콜로이드 실리카를 실란커플링제인 GPTMS (3-glycidoxypropyl trimethoxysilane)와 반응시킴에 의해 친수성 코팅용액을 제조하였다. 또한 이 친수성 코팅 용액을 폴리카보네이트 기재 위에 스핀코팅 시킨 후 $120^{\circ}C$에서 열경화 시킴에 의해 친수성 코팅 도막이 제조되었다. 이 과정 중 콜로이드 실리카의 평균 크기를 15 nm, 25 nm, 45 nm로 각각 변화시켜 코팅 도막의 물성에 미치는 영향을 살펴보았다. 그 결과 25 nm 크기의 콜로이드 실리카를 사용하여 제조된 코팅 도막은 $20^{\circ}$의 낮은 접촉각과 H의 우수한 연필경도를 나타내었다. 반면에 15 nm와 45 nm 크기의 콜로이드 실리카로 제조된 코팅 도막은 각각 $27^{\circ}$와 $36^{\circ}$의 높은 접촉각과 H와 B의 연필경도를 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.134-134
• /
• 2012

We investigated the interface of poly (3-hexylthiophene) (P3HT) and C61-butyric acid methylester (PCBM) by using photoelectron spectroscopy (PES). These are the most widely used materials for bulk heterojunction (BHJ) organic solar cells due to their high efficiency. Study of the BHJ interfaces is difficult because the organic films are typically prepared by spin coating in ambient conditions. This is incompatible with the interface electronic structure probes such as PES, which requires ultrahigh vacuum conditions. Study of interface requires gradual deposition of thin films that is also incompatible with the spin coating process. In this work, we used electrospray vacuum deposition (EVD) technique to deposit P3HT and PCBM in high vacuum conditions. EVD allows us to form polymer thin films onto ITO substrate in a step-wise manner directly from solutions and to use PES without exposing the sample to the ambient condition. Although the morphology of the EVD deposited P3HT films observed by optical and atomic force microscopes is quite different from that of the spin coated ones, the valence region spectra were similar. PCBM was deposited on the P3HT film in a similar manner and the energy level alignment between these two materials was studied. We discuss the relation between Voc of P3HT:PCBM solar cell and HOMO-LUMO energy offset obtained in this study.