• Journal of the Korean Society of Visualization
• /
• v.14 no.3
• /
• pp.38-45
• /
• 2016

Separation of particles based on different sizes, detection of pathogenic bacteria and isolation of leukocytes from whole blood are typical applications of spiral or helical microchannels. The present study focuses on developing a CD4+ T-cell counting device for monitoring HIV/AIDS patients with the aid of a helical minichannel used for a sample cartridge. For the experiment, $10{\mu}m$ sized microbeads were used for visualization with a fluorescence imaging system. Alignment of microbeads was investigated in a stationary and spinning sample cartridge filled with glycerol-water mixtures of different densities. The helical minichannel was spun using a DC motor controlled by an Arduino board with a Bluetooth shield. It was found that when the sample cartridge was made stationary, no bead alignment was achieved for a medium with density (0% and 20% glycerol) lower than that of the beads, but when it was spun at 2000-3000 rpm for 1-4 min, an alignment was obtained at the top of the channel facilitating optical detection and enumeration of those microbeads. Since an alignment of microbeads was achieved for a medium with density as that of blood plasma, the same approach can be applied for aligning and counting CD4+ T-lymphocytes in whole blood samples collected from patients.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.7
• /
• pp.891-898
• /
• 2000

Objective : It is difficult to differentiate intramedullary spinal cord tumors preoperatively from non-neoplastic pathologies in patients presenting as non-compressive myelopathies in magnetic resonance imaging(MRI). In this report, the authors reviewed nonneoplastic intramedullary spinal cord lesions preoperatively diagnosed as tumors and discussed their clinical and radiological characteristics and usefulness of surgical intervention. Methods : From January, 1985 to January, 1999, authors experienced eight non-neoplastic pathologies mimicking intramedullary spinal cord tumors and analysed their medical records, radiological findings and histopathological specimens retrospectively. Results : There were five males and three females and the duration of symptoms were from two to 20 months(mean, 9.8 months). The location of lesions were four cervical, one cervicothoracic and three thoracic. All patients manifested sensory abnormality, seven motor weakness, and six bladder symptom. All cases had swollen spinal cords and increased signal intensities in spin-echo sequences. Six cases showed contrast enhancement : four cases were focal and two diffuse. Under the impression of intramedullary tumors, the patients were operated upon. Final diagnoses on the base of clinical and pathologic finding were : three subacute necrotizing myelopathies, two multiple scleroses, two myelopathy of unknown etiology. One case showed no gross abnormality in surgical field in spite of adequate exposure of the lesion, so biopsy was not performed. In that case, postoperative MRI revealed spontaneous resolution of the lesion. Conclusion : MRI is invaluable diagnostic tool in screening myelopathies. However, its high sensitivity and lack of specificity make difficulty in preoperative differential diagnosis of non-compressive myelopathies. Although no surgical morbidity occurred in our series, we sometimes failed to confirm definite diagnosis even with biopsy. In such a circumstance, long-term follow up is needed.

• Corrosion Science and Technology
• /
• v.13 no.1
• /
• pp.28-35
• /
• 2014

Recently, the fuel oil of diesel engines of marine ships has been increasingly changed to heavy oil of low quality as the oil price is getting higher and higher. Therefore, the spiral gear attached at the motor of the oil purifier which plays an important role to purify the heavy oil is also easy to expose at severe environmental condition due to the purification of the heavy oil in higher temperature. Thus, the material of the spiral gear requires a better mechanical strength, wear and corrosion resistance. In this study, the heat treatment(tempering) with various holding time at temperature of $500^{\circ}C$ was carried out to the alloy of Cu-7Al-2.5Si as centrifugal casting, and the properties of both hardness and corrosion resistance with and without heat treatment were investigated with observation of the microstructure and with electrochemical methods, such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram, and a.c. impedance. in natural seawater solution. The ${\alpha}$, ${\beta}^{\prime}$ and ${\gamma}_2$ phases were observed in the material in spite of no heat treatment due to quenching effect of a spin mold. However, their phases, that is, ${\beta}^{\prime}$ and ${\gamma}_2$ phases decreased gradually with increasing the holding time at a constant temperature of $500^{\circ}C$. The hardness more or less decreased with heat treatment, however its corrosion resistance was improved with the heat treatment. Furthermore, the longer holding time, the better corrosion resistance. In addition, when the holding time was 48hrs, its corrosion current density showed the lowest value. The pattern of corroded surface was nearly similar to that of the pitting corrosion, and this morphology was greatly observed in the case of no heat treatment. It is considered that ${\gamma}_2$ phase at the grain boundary was corroded preferentially as an anode. However, the pattern of general corrosion exhibited increasingly due to decreasing the ${\gamma}_2$ phase with heat treatment. Consequently, it is suggested that the corrosion resistance of Cu-7Al-2.5Si alloy can be improved with the heat treatment as a holding time for 48 hrs at $500^{\circ}C$.