• Journal of International Academy of Physical Therapy Research
• /
• v.2 no.1
• /
• pp.229-236
• /
• 2011

The purpose of this study was to comparatively analyze the active stability of shoulder joints according to the frequency of overhead motions, such as serving and spiking, engaged in by female professional volleyball athletes who play different positions, and to provide the results as the basic data for developing exercise programs to prevent shoulder joint injuries. The subjects of this study were 50 Korean female professional volleyball players and positions were as follows: left and right attackers, centers, setters, and liberos. The external rotation and internal rotation muscle strength and muscle strength ratios of the dominant and non-dominant arms of all subjects were measured using Biodex. The results of this study are as follows: Frist, no significant differences were found in the internal and external rotation muscle strength of the dominant and non-dominant arms between positions. Second, for the shoulder joint muscle strength ratio of the dominant arm, by position, the setter showed significantly greater stability compared to the other positions. Third, for the shoulder joint muscle strength ratio of the non-dominant arm, by position, no significant difference in stability between positions was found. Fourth, it was found that the dominant arm had significantly greater instability of the shoulder joint than the non-dominant arm for attackers and centers, but no significant difference was found for setters and liberos. This study comparatively analyzed the muscle strength ratios of the external/internal rotations and dominant/non-dominant arms, which can determine the stability of the shoulder joints between female professional volleyball playing positions that engage in jumps and spikes using only the dominant hand and positions that do not.

• Korean journal of applied entomology
• /
• v.33 no.1
• /
• pp.19-25
• /
• 1994

Electrophysiological recordings of antennal responses to common plant volatile chemicals in the rice brown planthopper, Niloparuota lugens (Homoptera: Delphasidae}, were examined. Volatile plant chemicals were generally credited with a major role In host plant location for food or egg laying by many insects feeding on plants as adults and/or as larvae. An mitial examination of extracellular responses has been conducted. Acton potentials recorded from the plaque organs were initially positive-going, biphaslc spikes and the background firing rate of the cells recorded ranged from 1 ~22 impulses/sec. A wide range of responses to changes in concentration of the test chemical was observed. The commonest response was a relatively small increase in exitation with increasing concentration beween 1 J.lg and 100).\g on the filter paper in syringe. Adtivity either peaked at 100 $\mug$ and remained virtually saturated at 1000 f19 or tended to decrease at the highest concentration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.1 no.1
• /
• pp.26-31
• /
• 1963

1. This experiment was conducted with paddy rice in replicated field plot of clay load in Chung Puk College. This experiment has been intended to find out the suitable polt for increasing the yield of rice plant among the 36 plots which consist of 3 factors; deep plowing, heavy fertilizer and thick planting. 2 According to the standard and the heavy fertilizer applications, spikes and grains per phyung have been compared. It has been find out that the higher yield can be obtain in such plots as these; (1) the plot with standard fertilizer application, 15cm plowing depth and 400 hill per phyung, (2) the plot with two times as much fertilizer application, 30 cm plowing depth and 300 hills per phyung, (3) the plot with three times as much fertilizer application, 30cm plowing depth and 300 hills, or 45cm plowing depth and 400hills per phyung. 3. In the yield of brown rice, there has been significant difference in each main factor: hills per phyung, the plowing depth and the amount of fertilizer, and in the first order interaction; depthxfertilizer, depthxhills and hillsxfertilizer, and in the 2nd order interaction; depthx hillsxfertilizer. 4. In the plots with 30cm plowing depth, thick, planting of 200∼300 hills per phyung and two times as much fertilizer, the yield of rice has been superior to others.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.4
• /
• pp.43-58
• /
• 1980

The study was intended to know the responses of the nitrogen application levels (3, 6, 9, 12 and 15kg ai per $1O^a$) to grain yield and quality of two-malting barley, Golden melon and Hyang maek in 1980. There was investigated chlorophyll content, dry weight, heading, grain yield, yield components, contents of protein, fat and carbohydrate and activity of $\beta$-amylase and invertase. Nitrogen increment was effective to increase of number of grains per spike and number of spikes per unit area, increase of protein content and decrease of $\beta$-amylase activity, but it was not recognized the yield increase under the 12% protein content.

• Structural Monitoring and Maintenance
• /
• v.1 no.1
• /
• pp.131-157
• /
• 2014

Special track systems used to divert a train to other directions or other tracks are generally called 'railway turnout'. A traditional turnout system consists of steel rails, switches, crossings, steel plates, fasteners, screw spikes, timber bearers, ballast and formation. The wheel rail contact over the crossing transfer zone has a dip-like shape and can often cause detrimental impact loads on the railway track and its components. The large impact also emits disturbing noises (either impact or ground-borne noise) to railway neighbors. In a brown-field railway track where an existing aged infrastructure requires renewal or maintenance, some physical constraints and construction complexities may dominate the choice of track forms or certain components. With the difficulty to seek for high-quality timbers with dimensional stability, a methodology to replace aged timber bearers in harsh dynamic environments is to adopt an alternative material that could mimic responses and characteristics of timber in both static and dynamic loading conditions. A critical review has suggested an application of an alternative material called fibre-reinforced foamed urethane (FFU). The full-scale capacity design makes use of its comparable engineering characteristics to timber, high-impact attenuation, high damping property, and a longer service life. A field trial to investigate in-situ behaviours of a turnout grillage system using an alternative material, 'fibre-reinforced foamed urethane (FFU)' bearers, has been carried out at a complex turnout junction under heavy mixed traffics at Hornsby, New South Wales, Australia. The turnout junction was renewed using the FFU bearers altogether with new special track components. Influences of the FFU bearers on track geometry (recorded by track inspection vehicle 'AK Car'), track settlement (based on survey data), track dynamics, and acoustic characteristics have been measured. Operational train pass-by measurements have been analysed to evaluate the effectiveness of the replacement methodology. Comparative studies show that the use of FFU bearers generates higher rail and sleeper accelerations but the damping capacity of the FFU help suppress vibration transferring onto other track components. The survey data analysis suggests a small vertical settlement and negligible lateral movement of the turnout system. The static and dynamic behaviours of FFU bearers appear to equate that of natural timber but its service life is superior.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.967-973
• /
• 2000

A metabolism trial was conducted with 28 Najdi rams allocated into seven dietary groups to evaluate the effect of dietary inclusion of Salicornia bigelovii Torr biomass on nutrient digestibility, rumina I fluid metabolites and nitrogen and mineral balances. Either the stems (ST) or spikes (SP) of this seawater-irrigated halophyte were incorporated into complete diets at rates of 0, 10, 20 and 30% levels, replacing equal amounts of rhodesgrass hay in a ground mixed control diet. Digestibility of DM, OM, EE, NFE and fecal and urinary nitrogen were not affected by increased level of ST in the diet. As level of ST increased from 0 to 20% in the diets, CP digestibility and nitrogen retention approached their maximum (p<0.01), whereas CF digestibility reached its minimum (p<0.01). On the other hand, except for EE, digestion of all nutrients and nitrogen retention were linearly depressed (p<0.01) as SP increased in the diets from 10 to 30% level. Concentration of ammonia-N, total VFA and pH values in the rumen fluid were lower (p<0.01) with the ST- or SP-fed diets than with the control diet. Increasing level of ST or SP in the diet was associated with an increase (p<0.01) in the proportion of acetate and a decline (p<0.01) in molar percentage of propionate in the ruminal fluid. Sodium absorption increased (p<0.01) with increased ST and SP in the diets up to the 10 and 20% level, respectively, followed by constant absorption values up to the 30% level. When the level of ST in the diet gradually increased to 30%, a concomitant increased (p<0:01) in Ca and P absorption were obvious; whereas, increased level of SP in the diets from 0 to 30% resulted in noticeable (p<0.01) depression in Ca and P apparent absorption.

• Ocean and Polar Research
• /
• v.31 no.4
• /
• pp.339-347
• /
• 2009

It is possible to obtain accurate temperature and salinity profiles of the oceans using a SBE 911plus CTD and accompanying data conversion packages. To obtain highly accurate results, CTD data needs to be carefully processed in addition to proper and regular maintenance of the CTD itself. Since the manufacturer of the CTD provides tools that are necessary for post processing, it is possible to conduct proper processing without too much effort. Some users, however, are not familiar with all of the processes and inadvertently ignore some of these processes at the expense of data quality. To draw attention to these and other similar issues, we show how it is possible to improve data quality by utilizing a few extra processes to the standard or default data process procedures with CTD data obtained from the equatorial Eastern Pacific between 2001 and 2005, and 2007. One easy step that is often ignored in the standard data process procedure is "wild edit", which removes abnormal values from the raw data. If those abnormal values are not removed, the abnormality could spread vertically during subsequent processes and produce abnormal salinity in a range much wider than that of the raw data. To remove spikes in salinity profiles the "align CTD" procedure must be carried out not with the default values included in the data processing software but with a proper time constant. Only when "cell thermal mass" correction is conducted with optimal parameters, we can reduce the difference between upcast and downcast, and obtain results that can satisfy the nominal accuracy of the CTD.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.21-27
• /
• 2001

Impulsive sound and vibration signals in gear system are often associated with their faults. Thus these impulsive sound and vibration signals can be used as indicators in condition monitoring of gear system. The traditional continuous wavelet transform has been used for detection of impulsive signals. However, it is often difficult for the continuous wavelet transform to identify spikes at high frequency and meshing frequencies at low frequency simultaneously since the continuous wavelet transform is to apply the linear scaling (a-dilation) to the mother wavelet. In this paper, the spike wavelet transform is developed to extract these impulsive sound and vibration signals. Since the spike wavelet transform is to apply the non-linear scaling, it has better time resolution at high frequency and frequency resolution at low frequency than that of the continuous wavelet transform respectively. The spike wavelet transform can be, therefore, used to detect fault position clearly without the loss of information for the damage of a gear system. The spike wavelet transform is successfully is applied to detection of the gear fault with tip breakage.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.201-210
• /
• 2011

Discussion on restoration of Yi Sun-sin's Geobukseon used in sea battles of Imjin War continues. This is because no historical records which we can understand external and internal structure of Geobukseon used in Imjin War do not remain until now. The Geobukseon currently restored based on pictures of woodprint of Jella-jwasuyeong and Tongjaeyeong Geobukseon in Yi-chungmugong Jeonseo published by king's command in the 19th year (1795) of King Jeongjo, but two Geobukseons were built 203 years after Imjin war and not the same as that of Imjin War. Geobukseon that was built by Yi Sun-sin in Imjin War and restored now has many problems in terms of its structure and shape since they do not accord with the records of the literature at that time. Yi Deok-hong's Picture of Hexangonal Ship, drawing Geobukseon in 1593 for the first time was not in it in the study of Geobukseon, but it agrees with Imjin War in terms of the time and in analysis of the structure through picture interpretation and the relationship between Panokseon, Jella-jwasuyeong, and Tongjaeyeong Geobukseon, the center of the upper part of the roof cover is flat, and iron spikes are stuck in the front, back, left and right. The structure and shapes of Geobukseon in the records at the time of Imjin War.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.19
• /
• pp.100-131
• /
• 1975

To obtain basic information on the improvement of naked barley production. and to clarify the relation-ships between yield or yield components and some meteorogical factors for yield prediction were the objectives of this study. The basic data used in this study were obtained from the experiments carried out for 16 years from 1958 to 1974 at the Chon-nam Provincial Office of Rural development. The simple correlation coefficients and multiple regression coefficients among the yield or yield components and meteorogical factors were calculated for the study. Days to emergence ranged from 8 to 26 days were reduced under conditions of mean minimum air temperature were high. The early emergence contributed to increasing plant height and number of tillers as well as to earlier maximum tillering and heading date. The plant height before wintering showed positive correlations with the hours of sunshine. On the other hand, plant height measured on march 1st and March 20th showed positive correlation with the amount of precipitation and negative correlation with the hours of sunshine during the wintering or regrowth stage. Kernel weights were affected by the hours of sunshine and rainfall after heading, and kernel weights were less variable when the hours of sunshine were relatively long and rainfalls in May were around 80 to 10mm. It seemed that grain yields were mostly affected by the climatic condition in March. showing the negative correlation between yield and mean air temperature, minimum air temperature during the period. In the other hand, the yield was shown to have positive correlation with hours of sunshine. Some yield prediction equations were obtained from the data of mean air temperature, mean minimum temperature and accumulated air temperature in March. Yield prediction was also possible by using multiple regression equations, which were derived from yield data and the number of spikes and plant height as observed at May 20th.