• Communications for Statistical Applications and Methods
• /
• 제5권2호
• /
• pp.491-501
• /
• 1998

Motivated by bioequivalence studies which involve comparisons of pharmaceutically equivalent dosage forms, we propose a more general decision rule for showing equivalence simultaneously between multiple means and a control mean. Namely, this testing procedure is concerned with the situation in that one must make decisions as to the bioequivalence of an original drug product and several generic formulations of that drug. This general test is developed by considering a spherical confidence region, which is a direct extension of the usual t-based confidence interval rule formally approved by the U.S. Food and Drug Administration. We characterize the test by the probability of rejection curves and assess its performance via Monte-Carlo simulation. Since the manufacturer's main concern is the proper choice of sample sizes, we provide optimal sample sizes from the Monte-Carlo simulation results. We also consider an application of the generalized equivalence test to a repeated measures design.

• 대한전자공학회논문지
• /
• 제8권6호
• /
• pp.17-24
• /
• 1971

본 논문에서는 임의의 형상을 가진 유전체 안테나에 대한 새로운 해석 방법을 기술한다. 이 방법에서는 분극 전류 및 뇌하 밀도의 개념을 종래의 Stratton-Chu 형식에 도입하고 산란 원칙에 따라 유전체 내의 전계강도에 대해 적분 방정식을 세웠다. 이 적분 방정식을 수치 계산법으로 풀기 위해 유전체의 체적을 세분하고 작은 구로서 등가적으로 표시한다. 따라서 이 방법에 의해서는 임의의 형상의 유전체 안테나의 해석이 가능하다. 이와같이 해서 유전체 내의 전계강도를 구하고 그 강도에 입각해서 안테나의 복사특성, 입력 임피이단스 및 유전체 손실들을 산출했다.

• 청정기술
• /
• 제22권1호
• /
• pp.45-52
• /
• 2016

This study reports on the modeling and simulation of heat transfer in packaging boxes used for vaccine shipping. Both water and n-tetradecane are used as primary insulation materials inside a multi-slab system. The one-dimensional model, which is a spherical model using a radius equivalent to the rectangular geometry of container, is applied in this study. N-tetradecane with low thermal diffusivity and proper phase transition temperature exhibits higher heat transfer resistance during both heating and cooling processes compared to water. Thus, n-tetradecane is a better candidate as an insulating material for packaging containers for vaccine shipping. Furthermore, the developed method can also become a rapid and economic tool for screening appropriate phase change materials used as insulation materials with suitable properties in logistics applications.

• Journal of Welding and Joining
• /
• 제18권4호
• /
• pp.28-37
• /
• 2000

In this paper the LNG vessel of the Moss type which is capable of lifting 15,261 tons is investigated in the view point of the pressure vessel preliminary design using the finite element method. The Pressure vessel design is based on the equivalent stress levels due to the internal pressure. The finite element model of the spherical pressure vessel is configured using 4 noded quadrilateral shell element. The finite element analysis program NASTRAN and ANSYS 5.5are implemented. The design is compared with the three kinds of the boundary condition : first, where the equator of the pressure vessel is fixed, and where the top and is fixed, and, the bottom end is fixed, respectively. A comparison is presented between the results obtained by the finite element model and by the prototype production model. Additionally just below position(case 1 & case 2) of equator ring was carried out by using ANSYS 5.5. The results show that the vessel design based on the stress is acceptable at the preliminary design.

• 한국항공운항학회지
• /
• 제17권1호
• /
• pp.1-8
• /
• 2009

In this paper, reorientation based on angular momentum exchange is applied for a bias momentum stabilized satellite, which is equipped with a spherical fuel tank, and the effect of liquid slosh on the attitude properties such as inertia tensor and angular rate is investigated. In order to represent the slosh motion of liquid an equivalent mechanical model is adopted and full nonlinear equations of motion for three-body system are derived. Computer simulations are performed for several cases, which use the viscosity of liquid and the center location of the tank as input parameters, mainly in order to observe how the viscosity of liquid and the center location of the tank influence the spacecraft’s attitude. The investigation includes observing time-variations of the inertia tensor, especially presence of components of product of inertia during the maneuver.

• Transactions on Electrical and Electronic Materials
• /
• 제7권6호
• /
• pp.319-323
• /
• 2006

The problem of the partial discharge (PD) extinction is investigated. The transient process takes place in a small spherical inclusion which is located in the dielectric. Both the losses caused by polarization and ohmic losses as the dielectric parameters are taken into account. From the inclusion standpoint the dielectric is considered as an active two-pole element (equivalent generator) and inclusion represents by own current-voltage curve. PD extinction voltage was shown to depend on the polarization loss tangent.

• Computers and Concrete
• /
• 제7권1호
• /
• pp.39-51
• /
• 2010

The system of pores of autoclaved aerated concrete (AAC) is described by the so-called cherry-pit model, a random system of partially interpenetrating spheres. For the simulation of fracture processes, the solid phase is approximated by an irregular spatial network of beams obtained by means of the so-called radical tessellation with respect to the pore spheres. FE calculations using standard software (ANSYS) yield the strain energies of the beams. These energies are used as fracture criterion according to which highly loaded beams are considered as broken and are removed from the network. The paper investigates the relationship between mean fracture strength and microstructure for structures close to real AAC samples and virtual structures with particular geometrical properties.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.21-30
• /
• 2014

PURPOSES : Evaluation of input parameters determination procedure for dynamic analysis of aggregates in DEM. METHODS : In this research, the aggregate slump test and angularity test were performed as fundamental laboratory tests to determine input parameters of spherical particles in DEM. The heights spreads, weights of the simple tests were measured and used to calibrate rolling and static friction coefficients of particles. RESULTS : The DEM simulations with calibrated parameters showed good agreement with the laboratory test results for given dynamic condition. CONCLUSIONS : It is concluded that the employed calibration method can be applicable to determine rolling friction coefficient of DEM simulation for given dynamic conditions. However, further research is necessary to connect the result to the behavior of aggregate in packing and mixing process and to refine static friction coefficient.

• Journal of the Korean Wood Science and Technology
• /
• 제49권4호
• /
• pp.328-335
• /
• 2021

Considerable differences exist in the characteristics of size reduction and classification because of biomass species. Miscanthus sacchariflorus (M. sacchariflorus) Goedae-Uksae 1 is not used efficiently because of the imperfections of the processing technology for this biomass. Therefore, for the best use of specific biomass, improvement in the feedstock preparation of the biomass for processing, such as pellet manufacturing, is necessary. In this study, a laboratory-scale cone grinder and air classifier were designed and combined to investigate the performance of the combination system for M. sacchariflorus. The average equivalent spherical diameter of particles showed a close relationship with air velocity for air classification. The air velocity range to classify proper particles for pelletization was determined to be 6.0-6.8 m/s. The mass ratios of the collected particles to feed mass for four lengths of chopped M. sacchariflorus were 45.1%:46.1%, 39.1%:46.6%, and 44.1%:52.8% at the first, second, and third steps in simulating the multistep combination system, respectively.

• 한국안광학회지
• /
• 제15권3호
• /
• pp.219-225
• /
• 2010

목적: 굴절력 매트릭스와 가감 계산을 이용하여 구면 RGP 렌즈의 처방 굴절력 예측의 유용성을 평가하고자 하였다. 방법: 20대 55명 110안(남 36명, 여 19명 나이 $24.60{\pm}1.55$세)을 대상으로 비조절마비굴절검사와 덧댐굴절검사는 각막곡률측정 기능이 내장된 자동굴절력계를 이용한 타각적 검사와 자각적 검사를 실시하였다. 누액렌즈는 각막곡률과 RGP 렌즈의 베이스커브로부터 계산하였다. 현성굴절력과 누액렌즈로부터 매트릭스와 가감 계산에 의해 예측된 RGP 렌즈의 굴절력과 덧댐굴절검사 값을 구면(Sph), 등가구면(SE) 및 난시 굴절력 측면에서 비교하였다. 결과: 평균차이(MD)와 95% 일치도 범위(LOA=$24.60{\pm}1.55$)는 Sph (0.61D, $0.61{\pm}0.86D$)보다 SE (0.26D, $0.26{\pm}0.70D$)에서 좋았다. 실린더 굴절력에서 매트릭스와 가감 계산 사이의 평균차이와 일치도(-0.13D, $-0.13{\pm}0.53D$)는 다른 것(매트릭스와 덧댐굴절검사: -0.24D, $0.24{\pm}0.84D$; 가감 계산과 덧댐굴절검사, -0.12D, $0.12{\pm}1.00D$)보다 좋았다. 구면 RGP 렌즈의 적합성은 매트릭스에서 54.5%, 가감 계산에서 66.4%, 덧댐굴절검사에서 91.8%였으며, 가감 계산이 덧댐굴절검사에 근접하였다. 결론: 안경(또는 전체)난시와 각막난시의 축이 다르더라도 구면 RGP 렌즈 피팅 가능성과 처방 굴절력의 예측에서 매트릭스를 이용하는 것보다 가감 계산에 의한 등가구면 적용이 더욱더 유용하다.