• Journal of Advanced Marine Engineering and Technology
• /
• 제17권4호
• /
• pp.1-10
• /
• 1993

This paper introduces the outline of hull structure to the sorts of LNG carrier briefly. Especially, explains in detail for the insulation system of Moss Rosenberg Verft spherical tank type LNG carrier. It is not easy task to calculate exactly the temperature distribution of hull because of very complicated structure of hull. Therefore, in this paper by the adequate modeling of the Moss Rosengerg spherical tank type LNG carrier, a program is developed which calculate the temperature distribution of every hull and estimate the heat influx from every hull and output the BOR according to the variation of atmospheric conditions on boyage.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.836-842
• /
• 2001

The more sophisticated patterns of propagation model is presented in this paper, which includes three different source characteristics. The spherical, cosine and dipole radiation characteristics compared and sound event level and the maximum sound level are calculated by experiment and calculation. It is shown that patterns of propagation has dipole characteristics for low speed range(below about 150km/h) at electric multiple system. We know that push-pull high speed system(maximum speed: 300km/h) has cosine characteristics of noise propagation. For this purpose, We conduct the experiment of noise and know the empirical formula of noise level and radiation coefficient K. This model of simulation is conducted through point source array model at wheel/rail contact point by using program and experimental formula. We can guess prediction of profile, flat and wear of wheel by above modeling in near field.

• 소음진동
• /
• 제6권6호
• /
• pp.835-842
• /
• 1996

To identify the locations and strengths of acoustic sources, one may use a microphone line array. Apparent advantage of the source identification method utilizing a line array is that it requires less measurement points than intensity method and holography. This method is based on the information of magnitude and phase difference between pressure signals at each microphone. Since those differences are dependent on the source model, we have to assume them such as plane, monopole, etc. In this paper the conventional source identification methods such as beamforming method and MUSIC method are briefly reviewed by modeling a source as plane and spherical wave, then a modified method is introduced. This can be applied to sound field which may by either coherent or incoherent. Typical simulations and experiment are performed to confirm this identification method.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.731-738
• /
• 2010

Cavitation is described by formation and collapse of the bubbles in a liquid when the ambient pressure decreases. Formed bubbles grow and collapse by change of pressure, and when they collapse, shockwave by high pressure is generated. In general, bubble behavior can be described by Rayleigh-Plesset equation under adiabatic or isothermal condition and hence, phase shift by the pressure change in a bubble cannot be considered in the equation. In our study, a numerical model is developed from the mathematical model considering the phase shift from the previous study. In the developed numerical model, size of single spherical bubble is calculated by the change of mass calculated from the change of the ambient pressure in a liquid. The developed numerical model is verified by a case of liquid flow in a narrow channel.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.213-216
• /
• 2005

This paper presents force feedback control performance of a 3DOF haptic device that can be used for minimally invasive surgery (MIS). As a first step, a 3DOF electrorheological (ER) joint is designed using a spherical mechanism. And it is optimized based on the mathematical torque modeling. Subsequently, the master haptic device is manufactured by the spherical joint. In order to achieve desired force trajectories, model based compensation strategy is adopted for the ER master. Therefore, Preisach model fur the PMA-based ER fluid is identified using experimental first order descending (FOD) curves. A compensation strategy is then formulated through the model inversion to achieve desired force at the ER master. Tracking control performances for sinusoidal force trajectory are presented, and their tracking errors are evaluated.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1338-1348
• /
• 2004

A simplified method that models the deflagration process occurring in closed or vented vessels is described. When combustion occurs within the spherical or cylindrical vessels, the flame moves spherically or segmentally to the vessel periphery. The volume and area of each element along the propagating flame front are calculated by using simple geometrical rules. For instabilities and turbulence resulting in enhanced burning rates, a simple analysis results in reasonable agreement with the experimental pressure transients when two burning rates (a laminar burning rate prior to the onset of instability and an enhanced burning rate) were used. Pressure reduction caused by a vent opening at predetermined pressure was modeled. Parameters examined in the modeling include ignition location, mixture concentration, vented area, and vent opening pressure. It was found that venting was effective in reducing the peak pressure experienced in vessels. The model can be expected to estimate reasonable peak pressures and flame front distances by modeling the enhanced burning rates, that is, turbulent enhancement factor.

• 한국CDE학회논문집
• /
• 제5권3호
• /
• pp.242-254
• /
• 2000

This paper describes an efficient solid modeling method for thin-walled plastic or sheet metal parts, based on the non-manifold offsetting operations. Since the previous methods for modeling and converting a sheet into a solid have adopted the boundary representations for solid object as their topological framework, it is difficult to represent the exact adjacency relationship between topological entities of a sheet model and a mixture of wireframe and sheet models that can appear in the meantime of modeling procedure, and it is hard to implement topological operations for sheet modeling and transformation of a sheet into a solid. To solve these problems, we introduce a non-manifold B-rep and propose a sheet conversion method based on a non-manifold offset algorithm. Because the non-manifold offset aigorithm based on mathematical definitions results in an offset solid with tubular and spherical thickness-faces we modify it to generate the ruled or planar thickness-faces that are mostly shown in actual plastic or sheet metal parts. In addition, in order to accelerate the Boolean operations used the offset algorithm, we also develope an efficient face-face intersection algorithm using topological adjacency information.

• 한국측량학회지
• /
• 제34권3호
• /
• pp.243-251
• /
• 2016

일반적으로 라이다 데이터 처리 과정은 노이즈 제거, 지표면/비지표면 분리를 위한 필터링, 데이터 분류, 객체분할, 형태인식, 객체 모델링, 성과물에 대한 정확도 검증 등이다. 본 논문은 점군집 라이다 데이터를 이용한 3차원 곡면객체의 모델링과 정확도 검증에 중점을 두고 있다. 기존의 구형 및 원통형 객체 모델링 방법은 함수의 선형화, 미지계수의 초기 근사값 및 반복 계산이 요구되지만, 제안한 방법은 모델링 함수의 미지계수를 직접 결정하는 방법이다. 이를 위하여 객체를 형성하는 단위 객체면 형태를 분석하여 적합한 함수를 결정하고, 함수를 구성하는 미지변수를 추정한 후 정확도를 분석하여 타당성을 검증하였다. 제안한 방법을 반구형 및 반원통의 시뮬레이션 및 실제 건물 데이터에 적용하여 모델링 함수의 계수와 정확도를 산정하였으며, 다양한 형태의 객체 모델링의 자동화에 기여할 것으로 판단된다.

• Journal of Computing Science and Engineering
• /
• 제6권3호
• /
• pp.219-226
• /
• 2012

Recently, shape analysis of human organs has achieved much attention, owing to its potential to localize structural abnormalities. For a group-wise shape analysis, it is important to accurately restore the shape of a target structure in each subject and to build the inter-subject shape correspondences. To accomplish this, we propose a shape modeling method based on the Laplacian deformation framework. We deform a template model of a target structure in the segmented images while restoring subject-specific shape features by using Laplacian surface representation. In order to build the inter-subject shape correspondences, we implemented the progressive weighting scheme for adaptively controlling the rigidity parameter of the deformable model. This weighting scheme helps to preserve the relative distance between each point in the template model as much as possible during model deformation. This area-preserving deformation allows each point of the template model to be located at an anatomically consistent position in the target structure. Another advantage of our method is its application to human organs of non-spherical topology. We present the experiments for evaluating the robustness of shape modeling against large variations in shape and size with the synthetic sets of the second cervical vertebrae (C2), which has a complex shape with holes.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.295-299
• /
• 2007

This paper presents the ASF(Additional Secondary Factor) modeling of DGPS beacon signal. In addition to DGPS's original purpose, the feasibility to utilize DGPS system for timing and navigation has been studied. For timing and navigation, the positioning system must know the accurate time delay of signal traveling from the transmitter to receiver. Then the delay can be used to compute the user position. The DGPS beacon signal transmits the data using medium frequency, which travels through the surface and cause the additional delay rather than the speed of light according to conductivities and elevations of the irregular terrain. We introduce the modeling of additional delay(ASF) and present the results of implementation. The similar approach is Locan-C. Loran-C has been widely used as the maritime location system and was enhanced to E-Loran(Enhanced Loran). E-Loran system uses the ASF estimation method and is able to provide the more precise location service. However there was rarely research on this area in Korea. Hence, we introduce the ASF and its estimation model. With the comparison of the same condition and data from the original Monteath model and ASF estimation data of Loran system respectively, we guarantee that the implementation is absolutely perfect. For further works, we're going to apply the ASF estimation model to Korean DGPS beacon system with the Korean terrain data.