• 한국컴퓨터정보학회논문지
• /
• 제29권6호
• /
• pp.23-29
• /
• 2024

본 논문에서는 옷감과 입자 기반 유체 해법인 SPH(Smoothed particle hydrodynamics)를 이용한 액체 간의 상호작용으로 표현되는 다공성 흐름(Pore flow), 흡수, 방출 그리고 확산 효과를 GPU 기반으로 빠르게 표현할 수 있는 방법을 제안한다: 1) 옷감-액체의 상호작용에 의해 표현되는 다양한 물리적 효과를 GPU 기반으로 표현할 수 있는 통합형 프레임워크, 2) SPH 기반으로 노드의 포화도를 효율적으로 계산하고 이를 주변 Porous 입자들로 전달하는 방법, 3) 유체 흡수 및 방출 방향을 안정적으로 계산하기 위해 다르시 법칙(Darcy's law)을 기반으로 안정성을 개선시키는 방법, 4) Porous 입자들로 흡수되는 과정에서 유체의 흐름 방향에 따라 흡수되는 양을 조절하는 방법, 마지막으로 5) SPH 입자의 최대 질량이 넘지 않도록 방출할 수 있는 방법을 제시한다. 제안하는 방식의 가장 큰 장점은 모든 연산이 GPU에서 계산되고 동작하기 때문에 빠르게 옷감과 유체의 상호작용으로 표현되는 다공성 재질, 다공성 흐름, 흡수, 반사, 확산 등을 모델링할 수 있다.

• 화약ㆍ발파
• /
• 제41권3호
• /
• pp.13-25
• /
• 2023

종래의 벤치발파 공법은 한 발파의 모든 발파공에 역기폭을 적용하지만 MDS (mixture detonation system) 발파공법에서는 각 발파공의 공간적 또는 시간적 순서에 따라 정기폭과 역기폭을 교대로 적용한다. 공간적 순서에 따라 교대 적용하는 공법을 SMDS (spatial MDS), 시간적 순서에 따르는 공법을 TMDS (temporal MDS)라 부른다. 또 하나의 변종으로서 MMDS (modified MDS)가 있는데, 이 공법은 비산문제가 있는 현장을 위한 특수공법이다. 본 연구에서는 암석파괴 효과의 측면에서 MDS 발파공법을 종래공법과 비교한다. 비교는 LS-DYNA 상에서 2열 벤치발파 모델에 대한 수치적 시뮬레이션으로 이루어진다. 수치모델에서는 SPH-FEM 연계기법을 적용한다. SPH 요소는 발파공 부근의 근거리 영역의 암석에 적용하고, FEM 요소는 그 바깥의 원거리 영역에 적용한다. 암석에 대한 재료모델은 RHT 모델을 사용한다. 실제로 시뮬레이션을 수행한 결과, 벤치고 3.0 m, 저항선 1.6 m의 경우에 SMDS 발파공법이 종래공법에 비해 최대 0.4 m 더 깊은 파괴영역을 보였다. 덧붙여, MMDS 발파공법의 경우, 여타 공법들에 비해 벤치면 전방으로의 암편의 비산속도가 약 2.0 m/s 더 낮게 나타났다.

• Structural Engineering and Mechanics
• /
• 제14권4호
• /
• pp.455-472
• /
• 2002

The paper involves the study on the elastic and elasto-plastic stress wave propagation in the 1-D and 2-D solid media. The Smooth Particle Hydrodynamics equations governing the elastic and elasto-plastic large deformation dynamic response of solid structures are presented. The proposed additional stress points are introduced in the formulation to mitigate the tensile instability inherent in the SPH approach. Both incremental rate approach and leap-frog algorithm for time integration are introduced and the new solution algorithm is developed and implemented. Two examples on stress wave propagation in aluminium bar and 2-D elasto-plastic steel plate are included. Results from the proposed SPH approach are compared with available analytical values and finite element solutions. The comparison illustrates that the stress wave propagation problems can be effectively solved by the proposed SPH method. The study shows that the SPH simulation is a reliable and robust tool and can be used with confidence to treat transient dynamics such as linear and non-linear transient stress wave propagation problems.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.200-208
• /
• 2012

Surge overflow may cause damage on earthen levees. Levee strengthened on the levee crest and landward-side slope can provide protection against the erosion damage induced by surge overflow. In this paper, surge overflow of a roller compacted concrete RCC strengthened levee was studied in a purely Lagrangian and meshless approach, the smoothed particle hydrodynamics (SPH) method. After verifying the developed model with analytical solution and comparing the results with full-scale experimental data, the roughness and erosion parameters were calibrated. The water thickness, flow velocity, and erosion depth at crest, landward-side slope and toe were calculated. The characteristics of flow hydraulics and erosion on the RCC strengthened levee are given. The results indicate that the RCC strengthened levee can resist erosion damage for a long period.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권2호
• /
• pp.122-125
• /
• 2011

In this work, the movement pattern of a floating breakwater is numerically analyzed using Smoothed Particle Hydrodynamic (SPH) method as a Lagrangian scheme. At the seaside, the regular incident waves with varying height and period were considered as the dynamic free surface boundary conditions. The smooth and impermeable beach slope was defined as the bottom boundary condition. The effects of various boundary conditions such as incident wave characteristics, beach slope, and water depth on the movement of the floating body were studied. The numerical results are in good agreement with the available experimental data in the literature The results of the movement of the floating body were used to determine the transmitted wave height at the corresponding boundary conditions.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3264-3274
• /
• 2021

In a severe accident of light water reactor (LWR), molten core material (corium) can be released into the wet cavity, and a fuel-coolant interaction (FCI) can occur. The molten jet with high speed is broken and fragmented into small debris, which may cause a steam explosion or a molten core concrete interaction (MCCI). Since the premixing stage where the jet breakup occurs has a large impact on the severe accident progression, the understanding and evaluation of the jet breakup phenomenon are highly important. Therefore, in this study, the jet breakup simulations were performed using the Smoothed Particle Hydrodynamics (SPH) method which is a particle-based Lagrangian numerical method. For the multi-fluid system, the normalized density approach and improved surface tension model (CSF) were applied to the in-house SPH code (single GPU-based SOPHIA code) to improve the calculation accuracy at the interface of fluids. The jet breakup simulations were conducted in two cases: (1) jet breakup without structures, and (2) jet breakup with structures (control rod guide tubes). The penetration depth of the jet and jet breakup length were compared with those of the reference experiments, and these SPH simulation results are qualitatively and quantitatively consistent with the experiments.

• 한국재료학회지
• /
• 제33권4호
• /
• pp.115-123
• /
• 2023

In this paper, we report and discuss the semi-permanently hydrophilic (SPH) treatment of polyester fabric using plasma polymerization and oxidation based on atmospheric pressure dielectric barrier discharge (APDBD) technology. SiO_xC_y(-H) was coated on polyester fabric using Hexamethylcyclotrisiloxane (HMCTSO) as a precursor, and then plasma oxidation was performed to change the upper layer of the thin film to SiO₂-like. The degradation of hydrophilicity of the SPH polyester fabrics was evaluated by water contact angle (WCA) and wicking time after repeated washing. The surface morphology of the coated yarns was observed with scanning electron microscopy, and the presence of the coating layer was confirmed by measuring the Si peak using energy dispersive x-ray spectroscopy. The WCA of the SPH polyester fabric increased to 50 degrees after 30 washes, but it was still hydrophilic compared to the untreated fabric. The decrease in hydrophilicity of the SPH fabric was due to peeling of the SiO_xC_y(-H) thin film coated on polyester yarns.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2498-2515
• /
• 2024

In this study, we propose a fully parallelized adaptive particle refinement (APR) algorithm for smoothed particle hydrodynamics (SPH) to construct a stable and efficient multi-resolution computing system for nuclear safety analysis. The APR technique, widely employed by SPH research groups to adjust local particle resolutions, currently operates on a serialized algorithm. However, this serialized approach diminishes the computational efficiency of the system, negating the advantages of acceleration achieved through high-performance computing devices. To address this drawback, we propose a fully parallelized APR algorithm designed to enhance both efficiency and computational accuracy, facilitated by a new adaptive smoothing length model. For model validation, we simulated both hydrostatic and hydrodynamic benchmark cases in 2D and 3D environments. The results demonstrate improved computational efficiency compared to the conventional SPH method and APR with a serialized algorithm, and the model's accuracy was confirmed, revealing favorable outcomes near the resolution interface. Through the analysis of jet breakup, we verified the performance and accuracy of the model, emphasizing its applicability in practical nuclear safety analysis.

• 천문학회지
• /
• 제29권2호
• /
• pp.195-205
• /
• 1996

The evolution of the stellar debris after tidal disruption due to the super massive black hole's tidal force is difficult to solve numerically because of the large dynamical range of the problem. We developed an SPH (Smoothed Particle Hydrodynamics) - TVD (Total Variation Diminishing) hybrid code in which the SPH is used to cover a widely spread debris and the TVD is used to compute the stream collision more accurately. While the code in the present form is not sufficient to obtain desired resoultion, it could provide a useful tool in studying the aftermath of the stellar disruption by a massive black hole.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.450-455
• /
• 2004

There is few research about contact problem for a rigid surface with an arbitrary shape in SPH. The variational equation based on the virtual work principle is derived and its solution is obtained by the penalty method. It is proposed a new method that can determine the parameters for a penetration and a penetration rate used in the penalty method. The reproducing condition is adopted to correct the deficiency of kernel on the boundary. In order to calculate a penetration of particles, after checking boundary particles for deformable body boundary normal vectors were determined on the rigid surface. Numerical simulations for models which have rigid surface with an arbitrary shape were conducted to validate the proposed method in 2D. The results of those analysis represent that the contact algorithm proposed in this study works properly.