• Resources Recycling
• /
• v.4 no.3
• /
• pp.19-25
• /
• 1995

A Study on the recovery of the valuable metals(Vanadium Molybdenium) was carried out using spent catalysts originated from desulfurizing process of oil refinery. Experiments consisted of pre-roasting for Sulfur and Carbon removal, soda roasting and leaching for the extraction of valuable metals, and selective precipitation of Vanadium and Molybdenium. Effects of temperature and time in roasting for Sulfur removal, of $Na_2CO_3$ concentrations in soda roasting, and of pulp density, temperature and time in leaching were investigated for the recovery of Vanadium and Molybdenium. A optimum condition having over 85% in yield of Vanadium and Molybdenium was found. In the selective precipitation, more than 98% of Vanadium and Molybdenium were obtained by the variation of pH and concentration of additives.

• Resources Recycling
• /
• v.13 no.5
• /
• pp.28-36
• /
• 2004

The extraction of platinum group metals such as Pt, Pd and Rh from spent automobile catalyst has been investigated by leaching in HCl solutions using $HNO_3$ or NaOCl as a oxidant. The effect of type and amount of oxidant, reaction time and pulp density on the extraction of platinum group metals was examined. Platinum group metals were recovered by the cementation method using aluminum as a reducing agent. The extraction ratio was higher when NaOCl was used as a oxidant. The optimum leaching conditions were obtained to be: HCl 8 M, the amount of NaOCl 1.4 mole, leaching temperature $90^{\circ}C$, leaching time 180 minutes, pulp density 400g/L. Under the optimum conditions, the extraction of Pt, Pd and Rh were 96.1%, 93.6% and 77.3%, respectively. With the addition of 2.0g of aluminum which corresponds to 28 equivalent the reduction were 98% for Pt. 98.8% for Pd and 65.3% for Rh, respectively.

• Journal of Hydrogen and New Energy
• /
• v.19 no.5
• /
• pp.445-452
• /
• 2008

DME(Dimethyl ether) Dimethyl Ether (DME) is a new clean fuel and an environmental-benign energy resource. In comparison with other fuels, DME rapidly decomposes into carbon dioxide ($CO_2$) and water in the atmosphere without forming ozone. It can be manufactured from various energy sources including natural gas, coal, biomass and spent plastics. In addition to its environmentally friendly properties, DME is considered as one of the most promising candidates for the substitute of LPG and diesel fuel. In this work, we will be studied to find optimized condition for the catalyst of DME energy manufacture from hydrogen and carbon oxide and its chemical and physical characteristics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.7
• /
• pp.946-951
• /
• 2010

The objective of this research was to evaluate the effects of dietary supplementation of blood meal (BM) as a source of histidine, and magnesium oxide (MgO) as a catalyst of carnosine synthetase, on carnosine (L-Car) content in the chicken breast muscle (CBM), laying performance, and egg quality of spent old hens. Four hundred eighty laying hens (Hy-Line$^{(R)}$ Brown), 95wk old, were allotted randomly into five replicates of six dietary treatments: T1; 100% basal diet, T2; 100% basal diet+MgO, T3; 97.5% basal diet+2.5% BM, T4; 97.5% basal diet+2.5% BM+MgO, T5; 95% basal diet+5% BM, T6; 95% basal diet+5% BM+MgO. Magnesium oxide was added at 0.3% of diets. The layers were fed experimental diets for 5wk. There were no significant differences in the weekly L-Car content in CBM among all treatments during the total experimental period, but some of the contrast comparisions showed higher L-Car in CBM of T6. The L-Car contents linearly decreased (p<0.01 or p<0.05) as the layers got older except in T4 (p>0.05). There were significant differences in egg weight (p<0.01) and soft and broken egg ratio (p<0.05). The control (T1) was highest in egg weight and T6 was lowest in soft and broken egg ratio. Among the parameters of egg quality, there were significant differences in eggshell strength (p<0.01) and egg yolk color (p<0.05). Magnesium oxide supplementation increased the eggshell strength and BM tended to decrease egg yolk color. Eggshell color, eggshell thickness, and Haugh unit were not influenced by BM and MgO. In conclusion, BM and MgO did not significantly influence the L-Car in CBM of spent layers. The L-Car content rapidly decreased as the layers became senescent. Eggshell strength was increased by MgO supplementation.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.125-131
• /
• 2006

Dimethyl ether (DME) is a new clean fuel as an environmentally-benign energy resource. DME can be manufactured from various energy sources including natural gas, coal, biomass and spent plastic. In addition to its environmentally friendly properties, DME has similar characteristics to those of LPG. Therefore, it is considered as an excellent substitute fuel for LPG, fuel cells, power plant, and especially diesel and is expected to be the alternative fuel by 2010. The experimental study of the direct synthesis of DME was investigated under various conditions over a temperature range of $220{\sim}280^{\circ}C$, syngas ratio 1.2~3.0. All experiments were carried out with a hybrid catalyst, composed of a methanol synthesis catalyst ($Cu/ZnO/Al_2O_3$) and a dehydration catalyst (${\gamma}-Al_2O_3$). The observed reaction rate follows qualitatively a Langmiur-Hinshellwood model as the reaction mechanism. Such a mechanism is considered with three reactions; methanol synthesis, methanol dehydration and water gas shift reaction. From a surface reaction with dissociative adsorption of hydrogen, methanol, and water, individual reaction rate was determined.

• Asia-Pacific Journal of Business
• /
• v.4 no.1
• /
• pp.25-30
• /
• 2013

Today a consumer is confused and he looks only for values in relation to the prices spent by him/her in the buying process. He/She relates value in terms product pricing, brand value, his experiences etc. This therefore gives a vast scope for organized retailing that can make products available as per the aspirations of the consumer. For these organized retailers, Shopping Malls are acting as a catalyst and helping them to enhance their growth all over the country. They are providing them the required infrastructure and also helping them to achieve a faster growth. The present study is therefore done visualizing the opportunities available in the Indian market and the issues faced by the mushrooming of Malls in Indian metropolitan cities making their survival difficult due to cut-throat competition. This is also resulting in poor occupation and is not able to find neither the right rentals nor the footfalls.

• Clean Technology
• /
• v.26 no.4
• /
• pp.270-278
• /
• 2020

Palladium (Pd) has been widely used in various industrial applications such as jewelry, catalyst, and dental materials despite its limited resources. It has been gaining attention to recover Pd with high purity from the spent materials. This study investigated the optimum conditions for the leaching and recovery of metallic Pd. The leaching parameters are HCl concentration, temperature, time, concentration of oxidants, and pulp density. 97.2% of Pd leaching efficiency was obtained in 3 M HCl with 3 vol% oxidants at 80℃ for 60 min. The ratio of hydrogen peroxide to sodium hypochlorite played a critical role in the leaching efficiency due to the supply of Cl- ions in the leachate. Moreover, the complete recovery of Pd in the leachate was achieved at 80℃ with 0.3 formic acid/leachate after adjusting the pH value of 7. This situation was ascribed to the decomposition of formic acid into hydrogen gas and carbon dioxide at 80℃. ICP-AES and XRD characterized the recovered Pd powder, and the purity of the recovered powder was found to be 99.6%. Consequently, the recovered Pd powder with high purity could be used in circuits, catalyst precursors, and surgical instruments.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1431-1437
• /
• 2007

Cobalt titanates($CoTiO_x$), such as $CoTiO_3$ and $Co_2TiO_4$, have been synthesized via a solid-state reaction and characterized using X-ray diffraction(XRD) and X-ray photoelectron spectroscopic(XPS) measurement techniques, prior to being used for continuous wet trichloroethylene(TCE) oxidation at $36^{\circ}C$, to support our earlier chemical structure model for Co species in 5 wt% $CoO_x/TiO_2$(fresh) and(spent) catalysts. Each XRD pattern for the synthesized $CoTiO_3$ and $Co_2TiO_4$ was very close to those obtained from the respective standard XRD data files. The two $CoTiO_x$ samples gave Co 2p XPS spectra consisting of very strong main peaks for Co $2p_{3/2}$ and $2p_{1/2}$ with corresponding satellite structures at higher binding energies. The Co $2p_{3/2}$ main structure appeared at 781.3 eV for the $CoTiO_3$, and it was indicated at 781.1 eV with the $Co_2TiO_4$. Not only could these binding energy values be very similar to that exhibited for the 5 wt% $CoO_x/TiO_2$(fresh), but the spin-orbit splitting(${\Delta}E$) had also no noticeable difference between the cobalt titanates and a sample of the fresh catalyst. Neither of all the $CoTiO_x$ samples were active for the wet TCE oxidation, as expected, but a sample of pure $Co_3O_4$ had a good activity for this reaction. The earlier proposed model for the surface $CoO_x$ species existing with the fresh and spent catalysts is very consistent with the XPS characterization and activity measurements for the cobalt titanates.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.57-64
• /
• 2018

Water leaching of tungsten(W) and vanadium(V) was researched from their oxides through mechanochemical (MC) reaction with alkali compounds. Intensive grinding for the mixture of tungsten/vanadium oxide and alkali compounds (NaOH, $Na2CO_3$) was carried out with change of their mixing ratios and grinding duration. Water soluble compounds, $Na_2WO_4$ and $NaVO_3$, were synthesized through MC reaction and their solubilities increased in proportion to the mixing ratio of sodium compound and grinding times. Whereas vanadium leachability was less affected by the mixting ratio and grinding times. The leachabilities of 99.0% were accomplished by a short period of MC treatment, W (30 min.) and V (5 min.). This process enable us to extract W and V from their oxides via a water leaching, and can be applied to the selective recovery of W and V from $DeNO_x$ spent catalysts.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.11
• /
• pp.603-610
• /
• 2016

This work studies the synthesis of birnessite (${\delta}-MnO_2$), a catalyst of oxidative-coupling reactions, from the powder of spent alkaline manganese batteries (SABP, <8 mesh) and evaluate its reactivity for 1-naphthol (1-NP) removals. Manganese oxides using commercial reagents ($MnSO_4$, $MnCl_2$) and the acid birnessite (A-Bir) by McKenzie method were also synthesized, and their crystallinity and reactivity for 1-NP were compared with one another. 96% Mn and 98% Zn were extracted from SABP by acid leaching at the condition of solid/liquid (S/L) ratio 1:10 in $1.0M\;H_2SO_4+10.5%\;H_2O_2$ at $60^{\circ}C$. From the acid leaching solution, 69% (at pH 8) and 94.3% (pH>13) of Mn were separated by hydroxide precipitation. Optimal OH/Mn mixing ratio (mol/mol) for the manganese oxide (MO) synthesis by alkaline (NaOH) hydrothermal techniques was 6.0. Under this condition, the best 1-NP removal efficiency was observed and XRD analysis confirmed that the MOs are corresponding to birnessite. Kinetic constants (k, at pH 6) for the 1-NP removals of the birnessites obtained from Mn recovered at pH 8 (${Mn^{2+}}_{(aq)}$) and pH>13 ($Mn(OH)_{2(s)}$) are 0.112 and $0.106min^{-1}$, respectively, which are similar to that from $MnSO_4$ reagent ($0.117min^{-1}$). The results indicated that the birnessite prepared from the SABP as a raw material could be used as an oxidative-coupling catalyst for removals of trace phenolic compounds in soil and water, and propose the recycle scheme of SAB for the birnessite synthesis.