• 전기학회논문지
• /
• 제56권7호
• /
• pp.1241-1249
• /
• 2007

Lately, many approaches of speed sensorless control method for Interior Permanent Magnet Synchronous Motor(IPMSM) ha, been developed. This paper proposes a novel sensorless algorithm for speed estimation of IPMSM. First of all, proposes sensorless method estimates flux of rotor using foundational voltage equation of IPMSM and then estimates position and speed of rotor using Phase Locked Loop(PLL). Proposed sensorless algorithm demonstrated through simulation using Matlab simulink and experiment.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.740-742
• /
• 2010

This paper investigates a high-performance strategy for speed sensorless control of a permanent magnet synchronous motor. Two speed sensorless controls using back-EMF and reactive power are analyzed in this paper, and these two speed estimations are appropriately applied according to the steady and transient states for a high-performance sensorless control. The proposed sensorless control algorithm has a better performance compared to the conventional control algorithms.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권12호
• /
• pp.676-681
• /
• 2002

This paper presents the implementation and experimental investigation of sensorless speed control for a variable-speed PMSM(Permanent Magnet Synchronous Motor) in super-high speed compressor operation. The proposed control scheme consists of two different sensorless algorithms to guarantee the reliable starting operation in low speed region and full torque characteristics using the vector control in high speed region. An automatic switching technique between two control modes is proposed to minimize the speed and torque pulsation during the switching instant of control mode. A testing system of 3.3㎾ PMSM has been built and 90% load test results at 7000r/min are presented to examine the feasibility of proposed sensorless control scheme.

• 한국전자통신학회논문지
• /
• 제3권4호
• /
• pp.266-275
• /
• 2008

본 논문에서는 전동기 파라미터와 부하에 강인한 속도 특성을 위해 디지털 IP제어를 이용한 BLDC 전동기의 센서리스 속도제어 방식을 제안한다. 단자 전압을 이용한 BLDC 전동기의 센서리스 구동시 회전자 위치 추정을 위해 아날로그 필터를 사용하기 때문에 부하나 속도에 영향을 받는다. 전동기 파라미터에 둔감하고 부하의 영향에도 강건한 센서리스 속도제어를 하기 위해서는 정확한 회전자 위치 추정과 연동하는 강인한 속도 제어기가 필요하다. 본 논문에서는 디지털 IP제어를 이용하여 부하의 변동에도 강인한 정속제어와 일정 부하로 운전 중 가감속시 임의의 속도변화에 대해 BLDC 전동기의 안정된 센서리스 제어가 가능하도록 구성하였다. 이에 대한 타당성은 실험을 통하여 입증하고자 한다.

• Journal of Power Electronics
• /
• 제6권3호
• /
• pp.235-244
• /
• 2006

Recently, speed sensorless vector control for synchronous reluctance motors (SYRMs) has deserved attention because of its advantages. Although rotor angle calculation using flux estimation is a straightforward approach, the DC offset can cause an increasing pure integrator error in this estimator. In addition, this method is affected by parameter fluctuation. In this paper, to control the motor at the low speed region, a modified programmable cascaded low pass filter (MPCPLF) with sensorless online parameter identification based on a block pulse function is proposed. The use of the MPCLPF is suggested because in programmable, cascade low pass filters (PCLPF), which previously have been applied to induction motors, the drift increases vastly wl)en motor speed decreases. Parameter identification is also used because it does not depend on estimation accuracy and can solve parameter fluctuation effects. Thus, sensorless speed control in the low speed region is possible. The experimental system includes a PC-based control with real time Linux and an ALTERA Complex Programmable Logic Device (CPLD), to acquire data from sensors and to send commands to the system. The experimental results show the proposed method performs well, speed and angle estimation are correct. Also, parameter identification and sensorless vector control are achieved at low speed, as well as, as at high speed.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.70-78
• /
• 1999

The vector controlled induction motor(I.M) with speed sensor has been widely used for variable speed drive systems. In these application fileds, speed sensorless control are expected strongly to progress reliability, simplicity and cost performance of I.M and to expand its application part. This paper describes a novel speed sensorless control method of I.M based on feedforward quick torque response control technique. Especially, this paper aimed at the realization of sensorless control in the very low speed region, The proposed method can be formulated simply from a motor circuit equation and conducted easily by detecting primary motor currents and a voltage command at every sampling time. Throughout some results of numerical simulations with the assumption of using a pulse width modulation(PWM) voltage source inverter, the validity of the method was successfully confirmed.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.543-551
• /
• 2019

영구자석 동기 전동기는 출력 밀도가 높고 효율이 높다는 장점 때문에 적용 범위가 넓어지고 있다. 자동차나 로봇과 같은 고전력밀도, 고성능 전동기 구동 시스템뿐만 아니라 세탁기, 에어컨, 냉장고와 같은 비용 절감이 매우 중요한 시스템에도 영구자석 동기 전동기가 사용되고 있다. 비용 절감을 위해 회전자 위치 센서를 제거하는 센서리스 제어가 필요한데, 일반적으로 센서리스 제어는 전동기를 기동하는 조건에서는 사용하기 어렵다. 따라서 초기 기동에서는 전류 벡터를 임의의 속도로 회전시키는 I-F 속도 제어를 사용하고, 특정 속도 이상이 되면 센서리스 속도 제어로 절환해야 한다. I-F 속도 제어와 센서리스 속도 제어에서의 속도 제어 성능도 중요하지만 두 제어 기법이 절환되는 과도 상태에서도 속도 제어 성능을 유지해야 한다. 본 논문에서는 영구자석 동기 전동기의 센서리스 속도 제어를 위해 I-F 속도 제어에서 센서리스 속도 제어로의 절환 기법을 제안한다. 제안된 기법의 성능을 확인하기 위해 세탁기 구동 시스템에서 실험을 수행하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.289-293
• /
• 2004

The sensorless speed control technique for BLDCM using digital IP control is proposed in this paper for advanced speed characteristic which is robust for loads. The sensorless drive of BLDCM using terminal voltages is affected by load or speed because it uses analog filters to estimate the rotor position. For this reason, the robust speed controller with the accurate rotor position estimator is needed for sensorless control which is robust to load and insensitive to motor parameters. The constant speeds robust to load variation and the stable sensorless control of BLDCM robust to the increase or decrease of speed with constant load are implemented using digital IP control in this paper. The validity to these is established with experimentation.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.873-881
• /
• 2014

Speed sensorless modes of operation are becoming standard solution in the area of electric drives. This paper presents flux estimator and speed estimator for the speed sensorless vector control of induction motors. The proposed sensorless methods are based on the model reference adaptive system (MRAS) observer and adaptive speed observer (ASO). The proposed speed estimation algorithm can be employed in the power control of grid connected induction generator for wind power applications. Two proposed schemes are verified through computer simulation PSIM and compared their simulation results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.432-439
• /
• 1999

Several methods of induction motor drives which used speed estimators instead of shaft encoders have been reported. However those speed sensorless systems with estimators employing stator voltates and currents usually deteriorates as the speed gets lower because it is difficult to calculate the accurate rotor flux under the influence of DC-offset and saturation of integrators. In this paper to calculate rotor flux at low speed the new rotor flux estimator which replaces integra-tors with two lag circuits is proposed. Simulation and experiment results confirm the validity of this control scheme.