• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.1-4
• /
• 1996

The purpose of this treatise is to estimate speed of an induction motor and realize a robust speed control system with estimated speed in field-weakening region. A speed estimation is based on Model Reference Adaptive System(MRAS) technique and two flux estimator are designed to be robust against parameter variation. The MRAS-based overall control scheme has been implemented on 7.5kW Spindle induction motor control system. And it is verified that the proposed control scheme is very stable and robust in field-weakening region.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
• /
• pp.33-36
• /
• 2004

In this paper, a new estimation algorithm for the rotor speed for SRM drives is described. The algorithm is implemented by the sliding mode observer. The stability and robustness of the sliding observer for the parameter variations of the SRM are proved by variable structure control theory. Variable speed control of the SRM is accomplished by the estimated speed. Experiment results verify that the sliding mode observer is able to estimate the speed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.128.3-128
• /
• 2001

In this paper we proposed that the speed of induction motor is controlled by a PI controller, which could control unknown motor using Neural Network for auto-tuning of the PI parameter. The parameters of the PI controller were adjusted to reduce the speed error of the controlled motor. The input parameters of the Neural Network controller are the speed, q-axis current, and speed reference of the induction motor respectively. The usefulness of proposed controller will be confirmed by simulation which we compare with conventional PI controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 전문대학교육위원
• /
• pp.161-164
• /
• 2005

In this paper, a new estimation algorithm for the rotor speed for SRM drives is described. The algorithm is implemented by the binary observer. The stability and robustness of the binary observer for the parameter variations of the SRM are proved by variable structure control theory. Variable speed control of the SRM is accomplished by the estimated speed. Experiment results verify that the binary observer is able to estimate the speed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.695-698
• /
• 2010

본 논문은 High-speed signal에 대한 기본적인 설계 방법론, Differential signaling, Impedence matching, Decoupling Method 등에 대하여 논한 후 High-speed signal 의 전송 품질을 개선하기 위한 GND via 의 효과에 대하여 논하고자 한다. S-parameter simulation 및 실제 제품 적용 후 파형의 변화를 관찰하여 GND via 의 효용성을 살펴보아 High-speed signal Design 할 때 Design limitation 상황에 대해 적절한 방법론을 말하고자 한다.

• 한국태양에너지학회 논문집
• /
• 제33권1호
• /
• pp.32-39
• /
• 2013

Effects of Weibull shape parameter, k, on capacity factors of wind turbines were investigated. Wind distributions with mean wind speeds of 5 m/s, 6 m/s, 7 m/s and 8 m/s were simulated and used to estimate the annual energy productions and capacity factors of a 2MW wind turbine for various Weibull shape parameters. It was found from the study that the capacity factors of wind turbines are much affected by Weibull shape parameters. When the annual mean wind speed at the hub height of a wind turbine was about 7 m/s, and the air density was assumed to be 1.225 $kg/m^3$, the maximum capacity factor of a 2 MW wind turbine having a rated wind speed of 13 m/s was found to occur with the shape parameter of 2. It was also found that as the mean wind speed increased, the Weibull k parameter which yielded the maximum capacity factor increased. The simulated results were also validated by predictions of capacity factors of wind turbines using wind data measured in complex terrain.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.623-626
• /
• 1991

Crucial to the success of the vector control scheme without speed sensor is up to computing instantaneous position of the rotor flux. In tracing this flux depending on the machine parameter, variations of those factor lead to the non-linear charlcteristic between I/O value and decrease overall efficiency of the vector control scheme. This paper, using recursive least square method estimating instantaneous value of the machine speed and parameter from the shift of current and voltage, proposes an algorithm for compensating the I/O error of the scheme.

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.123-130
• /
• 2006

In manufacturing, process automation and parameter optimization are required in order to improve productivity. Especially in welding process, productivity and weldablity should be considered to determine the process parameter. In this paper, optimization methodology was proposed to determine the welding conditions using the objective function in terms of productivity and weldablity. In order to conduct this, welding experiments were carried out. Tensile test was performed to evaluate the weldability. Neural network model to estimate tensile strength using the laser power, welding speed, and wire feed rate was developed. Objective function was defined using the normalized tensile strength which represented the weldablilty and welding speed and wire feed rate which represented the productivity. The optimal welding parameters which maximized the objective function were determined.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.172-179
• /
• 1996

In the paper, QCELP (qualcomm code excited linear predictive), CDMA (code division multiple access)'s vocoder algorithm, was analyzed. And then, a ptich parameter seaarch architecture for 16-bit programmable DSP(digital signal processor) for QCELP was designed. Because we speed up the parameter search through high speed DSP using two MACs, we can satisfy speech codec specifiction for the digital celluar. Also, we implemented in FIFO(first-in first-out) memory using register file to increase the access time of data. This DSP was designed using COMPASS, ASIC design tool, by top-down design methodology. Therefore, it is possible to cope with rapid change at mobile communication market.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.31-38
• /
• 2012

In this paper, we selected primary cutting parameters that influence on surface roughness of cut bottom surface in end-milling for SM25C material. Those are overhang, depth of cut, feed rate and spindle speed. And then performed orthogonal array experiment and ANOVA by Taguchi method to determine that improved level combination of cutting parameters for betterment of working efficiency and surface roughness one of quality characteristics. And we verified a advisability of prediction model by verification test about level combination. From the results, main cutting parameter influences on surface roughness is spindle speed and the next is feed rate.