• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.52-61
• /
• 2020

The natural change of winter night temperature from 00:00 to 04:30 O'clock with the different height of thermal screen in a venlo type glasshouse (W59×L68×H5.9 m) was studied using computational fluid dynamics (CFD). At the early stage of CFD analysis, the room temperature decrease of glasshouse with the 5.9 m height of thermal screen were faster than it with the 4.1m height of thermal screen, but at 2 hr after analysis it was slower than in it with the 4,1m, the temperature difference was 0.6℃ after 4 hr. If we consider that turn on the heater when the temperature were decrease below 13℃ at 1hr after CFD analysis, it is good for energy saving in the glasshouse with the 4.1 m height of thermal screen rather than in it with the 5.9 m height, because of the temperature decrease were slow during 2 hrs after analysis. The airflow at the height of 2 m which were grown tomato were fast and wide in the glasshouse with the 5.9 m height thermal screen rather than in it with the 4.1 m, the speed difference was 0.034m·s^-1 at 1hr after CFD analysis. The effect of temperature decrease in summer season were compared with the different height of shading screen from 12:00 to 14:30 O'clock. The height of shading screen were 5.7, 3.9 m, the gap of it were 30%. The air-inflow quantity by the fan with duct at lower part of venlo glasshouse was 0.67 ㎥·s^-1 until 1hr and to increase 3 times of it from 1hr after analysis. The roof window were open 100%. Until 1hr of CFD analysis, the temperature in the 30% open of shading screen was 0.9℃ higher than in the none shading screen. From 13:00 O'clock when the air-inlet quantity to increase 3 times, the temperature in case 30% gap of shading screen were decreased compare with the none shading screen, the temperature difference was 0.5℃ at 14:30 O'clock. The temperature on the floor surface in case 30% gap of shading screen were lower with it's height increase, the temperature difference was 8℃ compare with none shading screen. The relative humidity difference were insignificant by the height and gap of shading screen.

• Korean Journal of Agricultural Science
• /
• v.36 no.2
• /
• pp.199-209
• /
• 2009

For increasing the consumption of pear, the pear wines were made by using eight different kinds of yeast. The chemical properties, such as pH, acidity, ethanol and sugar contents, and the consumer acceptance of various pear wines were analyzed. In analysis result of chemical properties, the value of pH was decreased and the acidity was increased until few days, and then retained during fermentation. The ethanol content was increased and the sugar content was decreased during fermentation. The pear wine brewed by B yeast (Lalnin, Saccharomyces cerevisiae) among eight different kinds of yeast had the highest content of ethanol, also this wine was represented the most consumer acceptance by the panels who consist of two age groups such as 20's to 30's and 50's to 60's. Therefore, we chose the yeast B for analyzing the effect of additives during fermentation. As the additives, the $K_2S_2O_5$ and ammonium phosphate as the disinfectant and hemicellulase and pectinase as fermenting conditioner were added into the pear wine brewed by yeast B. When additives are added, the chemical properties were the same as followed. Te values of pH was lower than when additives were not added(control). The acidity was he highest when ammonium phosphate was added, but the acidity was not changed after 4 day fermentation. Sugar contents when added $K_2S_2O_5$ 350ppm was shown the fastest deceasing, and it was orderly decreased as control, ammonium phosphate, hemicellulase, pectinase, and $K_2S_2O_5$ 175ppm. The decreasing rate of sugar content of these 6 test groups during fermentation gradually decreased without a big changes and the after 7 day fermentation, sugar contents were seldom decreased and the final sugar content was $9.5{\sim}9.8^{\circ}Brix$. In terms of change of the content of ethanol, all test groups generated 11~12.4% ethanol after 7 day fermentation. The group where ammonium phosphate was added generated 12.4% alcohol, which is the fastest speed and the group, which hemicellulase additive was added, showed generally slow alcohol generation rate. In terms of ethanol contents, the non-additive group and $K_2S_2O_5$ additive group showed 0.05%, which is very low, and hemicellulase and pectinase additive group is more than 0.5% which is rather high.

• (The) Research of the performance art and culture
• /
• no.23
• /
• pp.63-103
• /
• 2011

This paper inquires closely into the background of pansori gosu(drummer) and his social position based on documents and oral materials and the performance features of gosu in the entire process of pansori performance, 'preparation', 'performance' and 'aftermath', focused on the relationship between the changja(singer)-gosu. In the past, some gosus were ex-tightrope performers. Their social position and working conditions were better than that of the ex-tightrope performers but were worse than that of the pansori singer. After 1910's, people formed some special sense about the gosu due to the change of the space for pansori performances and the technological advances on the media, and gosu's conditions improved. The theory of pansori drum gradually began to be established well. The function and the role of gosu in the whole process of pansori performance may be summarized as follows. To begin with, the training with various and a lot of singers is required in the 'preparation'. Rehearsals are divided into individual practices and joint practices, and the latter can be controlled by the level of the capacity of gosu and the degree of the experience between chanja-gosu. Next, bobiwi(flattering drumming) and chuimsae(encouraging remarks) are important in tbe 'process'. The gosu has to share the speed of one jangdan(rhythmic patterns) and the accent of the sori and adjust his enery. Besides, he has to acknowledge the naedeureum(beginning sign) and reply with changja's singing. In formal performances, working in harmony with changja and gosu and their joint experiences are necessary for the gosu; in pansori contests, giving chanja a stability; in contests for gosu, drumming skill, position, chuimsae; in small performances and new adaptation of pansori, cheap fees and positive response of the transformational play or ad-lib; in lecturer concerts, reacting quickly to rapidly changing situations. Chuimsae is way which gosus and audiences express their feeling together, however, its context and sound are different. Finally, 'aftermath' is a process the pair of chamgja and gosu mutually evaluates about performance or audiences estimate that.

• The Journal of Korean society of community based occupational therapy
• /
• v.6 no.1
• /
• pp.13-23
• /
• 2016

Objective : The aim of the present study was to investigate the effect of aloud reading on handwriting legibility in low-level elementary school children. Methods : The subject of the present study consisted of 45 elementary school 2nd graders who were normally developed checked by the Developmental Test of Visual Perception. Experimental period was conducted total six times that Pre-evaluation once, four times intervention, and Post-evaluation once from November 2 to November 25, 2015. When Pre-evaluation and Post-evaluation was measured the handwriting legibility and speed using Handwriting Skill Test. When intervention divided and implemented to experimental group who handwriting with aloud reading, control group1 who only handwriting, and control group2 who nothing. Pre-evaluation and Post-evaluation identified change the handwriting legibility using Handwriting Skill Test. Result : After intervention, handwriting legibility improve female than male. At word card1, control group1 improve significantly handwriting legibility within group and control group2 come out significant difference but handwriting legibility decrease. At word card2, experimental group and control group1 improve significantly handwriting legibility within group. Experimental group and control group1, control group1 and control group2 come out significant difference between group. Conclusion : The present study demonstrates that handwriting training improve handwriting legibility to elementary school 2nd graders.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.54-60
• /
• 2010

Purpose: Nuclear medicine manufacturers provide various softwares which shorten imaging time using their own image processing techniques such as UlatraSPECT, ASTONISH, Flash3D, Evolution, and nSPEED. Seoul National University Hospital has introduced softwares from Siemens and Philips, but it was still hard to understand algorithm difference between those two softwares. Thus, the purpose of this study was to figure out the difference of two softwares in planar images and research the possibility of application to images produced with high energy isotopes. Materials and Methods: First, a phantom study was performed to understand the difference of softwares in static studies. Various amounts of count were acquired and the images were analyzed quantitatively after application of PIXON, Siemens and ASTONISH, Philips, respectively. Then, we applied them to some applicable static studies and searched for merits and demerits. And also, they have been applied to images produced with high energy isotopes. Finally, A blind test was conducted by nuclear medicine doctors except phantom images. Results: There was nearly no difference between pre and post processing image with PIXON for FWHM test using capillary source whereas ASTONISH was improved. But, both of standard deviation(SD) and variance were decreased for PIXON while ASTONISH was highly increased. And in background variability comparison test using IEC phantom, PIXON has been decreased over all while ASTONISH has shown to be somewhat increased. Contrast ratio in each spheres has also been increased for both methods. For image scale, window width has been increased for 4~5 times after processing with PIXON while ASTONISH showed nearly no difference. After phantom test analysis, ASTONISH seemed to be applicable for some studies which needs quantitative analysis or high contrast, and PIXON seemed to be applicable for insufficient counts studies or long time studies. Conclusion: Quantitative values used for usual analysis were generally improved after application of the two softwares, however it seems that it's hard to maintain the consistency for all of nuclear medicine studies because result images can not be the same due to the difference of algorithm characteristic rather than the difference of gamma cameras. And also, it's hard to expect high image quality with the time shortening method such as whole body scan. But it will be possible to apply to static studies considering the algorithm characteristic or we can expect a change of image quality through application to high energy isotope images.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.3
• /
• pp.135-142
• /
• 2001

This study attempts to categorizes the factors of forest fire occurrences based on regional meteorologic data and general forest no characteristics of 18 cities and guns in Kangwon province. lo accomplish this goal, some statistical analyses such as analysis of variance, correspondence analysis and multidimensional scaling were adopted. To reveal the forest fires pattern of study region, a categorization process was conducted by employing the quantification approach which modified and quantified the metric-data of fire occurrence dates. Also, The fire occurrence similarity was compared by using multidimensional scaling for each study region. The major results are summarized as follows: It was found that the meteorological factors emerged as different to each region are average and maximum temperature, minimum dew point temperature and average and maximum wind speed. In the result of correspondence analysis representing relationships between fire causes and study regions, Kangrung is caused by arsonist, Chulwon, Hwachen and Yanggu caused by military factor, Sokcho and Chunchen caused by the debris burning, and Samchuk caused by general man-caused fires, respectively. Finally, the forest fire occurrence pattern of this study regions were divided into five areas such as, group I including Samchuk, Kangryung, Chunchen, Wonju, Hongchen and Hhoingsung, group II including Donghae, Taebaek, Yangyang and Pyongchang, group III including Jungsun, Chulwon and Whachen, group Ⅵ including Gosung, Injae and Yanggu, and group V including Shokcho and Youngwol.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.356-365
• /
• 2022

Agrivoltaic systems, also called solar sharing, stated from an idea that utilizes sunlight above the light saturation point of crops for power generation using solar panels. The agrivoltaic systems are expected to reduce the incident solar radiation, the consequent surface cooling effect, and evapotranspiration, and bring additional income to farms through solar power generation by combining crops with solar photovoltaics. In this study, to evaluate if agrivoltaic systems are suitable for viticulture, we investigated the microclimatic change, the growth of vines and the characteristics of grape grown under solar panels set by planting lines compared with ones in open vineyards. There was high reduction of wind speed during over-wintering season, and low soil temperature under solar panel compared to those in the open field. There was not significant difference in total carbohydrates and bud burst in bearing mother branches between plots. Despite high content of chlorophyll in vines grown under panels, there is no significant difference in shoot growth of vines, berry weight, cluster weight, total soluble solid content and acidity of berries, and anthocyanin content of berry skins in harvested grapes in vineyards under panels and open vineyards. It was observed that harvesting season was delayed by 7-10 days due to late skin coloration in grapes grown in vineyards under panels compared to ones grown in open vineyards. The results from this study would be used as data required in development of viticulture system under panel in the future and further study for evaluating the influence of agrivoltaic system on production of crops including grapes.

• (The) Research of the performance art and culture
• /
• no.37
• /
• pp.157-186
• /
• 2018

Ulsan Soeburi song was reenacted in the 1980s based on the testimony and songs of late Choi Jae man (1987 death), the last blacksmith of the iron production plant at Dalcheon dong, Ulsan in August 1981. The purpose of this study is to analyze Soeburi song from the musical perspective based on 13 kinds of data including video in 1981, and confirm the changing patterns in the tradition process. The derived results are summarized as follows. In the results of examining Soeburi Song data in 2017, the percussion instruments consist of kkwaenggwari 2 (leading small gong 1, follow small gong 1), jing 2 (large gong 2), buk 4 (drum 4), janggu 4 (double headed drum 4), taepyongso 1 (Korean shawm 1), and Jangdan (rhythm) consists of five such as Jilgut, Jajinmori, Dadeuraegi, Deotbaegi, Jajin Deotbaegi. The vocal songs are sung accompanied by the Deotbaegi Jajin Deotbaegi (beat) of quarter small triplet time, or without accompaniment. The scale is mostly Mi La do's third note or Mi La do re's fourth note, and the range does not exceed one octave. All the cadence tones are the same as La. From the results of observing Soeburi song performance until today after the excavation in 1981, it is found that there are four major changes. First, the composition of the music is differentiated into 'long Jajin (slow fast)', and , , and are added. Second, the singing method is based on 'single cantor + multi post singers' since 1980's reenactment, and a single post singer was also specified from time to time. In addition, , which was performed in 2013, became the foundation of . Third, a melodic change of was observed. All beat structures are quarter small triplet time, but the speed gets slow, Mi La do's three notes are skeletonized to be corrected with high re and low sol, and then the characteristics of Menari tori (the mode appeared in the eastern province of the Korean peninsula) are to be clear. Lastly, the four percussion instruments such as kkwaenggwari, jing, janggu, and buk are frequently used, and depending on the performance, sogo (hand drum), taepyongso, yoryeong (bell) are also added. Jangdan played Jajinmori, Dadeuraegi, Deotbaegi and Jajin Deotbaegi from the beginning, and thereafter, the Jilgut Jangdan was added. Through these results as above, it is confirmed that at the time of the first excavation, a simple form of such as has been changed into a male labor song, the purpose of which has changed, and that the playability has become stronger and changed into a performing arts.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.2
• /
• pp.63-75
• /
• 2013

The Inner Port Phase 2 area of the Pyeongtaek-Dangjin Port is enclosed by a total of three permeable sea-walls, and the disposal site to the east of the Inner Port Phase 2 is also enclosed by two permeable sea-walls. The maximum tidal range measured in the Inner Port Phase 2 and in the disposal site in May 2010 is 4.70 and 2.32 m, respectively. It reaches up to 54 and 27%, respectively of 8.74 m measured simultaneously in the exterior. Regression formulas between the difference of hydraulic head and the rate of interior water volume change, are induced. A three-dimensional numerical hydrodynamic model for the Asan Bay is constructed incorporating a module to compute water discharge through the permeable sea-walls at each computation time step by employing the formulas. Hydrodynamics for the period from 13th to 27th May, 2010 is simulated by driving forces of real-time reconstructed tide with major five constituents($M_2$, $S_2$, $K_1$, $O_1$ and $N_2$) and freshwater discharges from Asan, Sapkyo, Namyang and Seokmoon Sea dikes. The skill scores of modeled mean high waters, mean sea levels and mean low waters are excellent to be 96 to 100% in the interior of permeable sea-walls. Compared with the results of simulation to obstruct the flow through the permeable sea-walls, the maximum current speed increases by 0.05 to 0.10 m/s along the main channel and by 0.1 to 0.2 m/s locally in the exterior of the Outer Sea-wall of Inner Port. The maximum bottom shear stress is also intensified by 0.1 to 0.4 $N/m^2$ in the main channel and by more than 0.4 $N/m^2$ locally around the arched Outer Sea-wall. The module developed to compute the flow through impermeable seawalls can be practically applied to simulate and predict the advection and dispersion of materials, the erosion or deposion of sediments, and the local scouring around coastal structures where large-scale permeable sea-walls are maintained.

• Korean journal of food and cookery science
• /
• v.18 no.6
• /
• pp.704-715
• /
• 2002

This study intended to compare dietary and snack habits of primary students in the schools providing and non-providing lunch to clarify the correlation between those conditions and the occurrence of dental caries. Furthermore, this study also focused on evaluating educational effects by providing children with nutritional education program. 1. As a result of dietary habit analysis, it was found that children from the school providing lunch were better in terms of breakfast regularity, eating speed. optimum amount of intake, and meal time regularity than those from the school non-providing lunch. In particular, it was noted that children from the school providing lunch took a little more meat, fish, seaweed and milk or dairy products than those from school non-providing lunch. Thus, it could be assumed hat children provided with lunch have more reasonable dietary habit than those without lunch program. In general, it was found that there was a slight positive change in children's dietary habit after nutritional instruction than before, suggesting that the nutritional education had effects on improving their dietary habit. 2. It was found that primary students often took snacks causing dental caries such as caramel, chocolate, sweets and biscuits, and children from the school providing lunch were more willing to reduce those snacks upon recognizing the causes of dental caries than those from the school non-providing lunch. For the children who chewed gum with physical cleansing effects, it was shown that the highest frequency wat twice or three times a week. Moreover, the ratio of children who took snacks following dinner which might affect their dental caries and the ratio of children who selected snacks because of TV commercial were both reduced after nutritional education. Also the consumption of detergent foods like vegetable, fruit, protein. seaweed. milk or dietary products after nutritional education was increased. 3. It was found that children from the school providing lunch took more often all food groups except for food group IV affecting dental caries than those from the school non-providing lunch. The average number of consuming foods which cause dental caries was 5.04 times per person a day, and most of those were rather taken by liquid than solid food. The average eating times of rinsing foods which kill the bacteria on the surface of teeth and prevent from dental caries, was 9.33 for a person a day, which was a little higher than recommended time. Exposed time for dental caries for a person a day was 100.9 min, of which liquid dental caries was 56.2 min and solid dental caries was 44.6 min, suggesting that liquid food had a high potential to cause dental caries.