• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.16-22
• /
• 2009

We propose a method to convert a two-dimensional movie to a three-dimensional movie using normalized cut and optical flow. In this paper, we segment an image of a two-dimensional movie to objects first, and then estimate the depth of each object. Normalized cut is one of the image segmentation algorithms. For improving speed and accuracy of normalized cut, we used a watershed algorithm and a weight function using optical flow. We estimate the depth of objects which are segmented by improved normalized cut using optical flow. Ordinal depth is estimated by the change of the segmented object label in an occluded region which is the difference of absolute values of optical flow. For compensating ordinal depth, we generate the relational depth which is the absolute value of optical flow as motion parallax. A final depth map is determined by multiplying ordinal depth by relational depth, then dividing by average optical flow. In this research, we propose the two-dimensional/three-dimensional movie conversion method which is applicable to all three-dimensional display devices and all two-dimensional movie formats. We present experimental results using sample two-dimensional movies.

• Journal of Global Scholars of Marketing Science
• /
• v.7
• /
• pp.261-281
• /
• 2001

As a new environment, the Internet proposes to us the innovative change of our life. With difficulty, we can go after the Internet's potentiality and the growth speed of technology. In the new stream of innovation technology, we can probably feel the fear of tremendous changes, the reverse, also hope to get the opportunity that come out of Internet world. EC(Electronic Commerce) that out of the evolution of Internet technology gets a coporation changes to survive in 21st century. So the corporation must set the strategy to fit a Internet focused society. As one of them, a virtual store is opened on the Internet. Recently, there has been much attention to the Internet shopping mall as a new distribution channel and marketing tool. This study analyzed that the system environment, perceived product risk, easy of order, perceived security risk would have impact on the customer satisfaction in Electronic Commerce. The Purpose of this study is to develope the concept of the determinants of customer satisfaction and to test a theoretical framework that attempts to explain how the perception of satisfaction in Electronic Commerce. The proposed hypotheses were tested internet shopping mall users and the study results show all hypotheses are supported.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.209-216
• /
• 2014

One of the widely used NDT(Non-destructive techniques) is the ultrasonic pulse velocity (USPV) method, which determines the travel time of the ultrasonic pulse through the tested materials and most studies were focused on the results expressed in time domain. However, the signal of ultrasonic pulse in time domain can be transformed into frequency domain, through Fast fourier transform(FFT) to give more useful informations. This paper shows a comparison of changes in the pulse velocity and frequency domain signals of concrete for various load histories using lightweight fine aggregates. The strength prediction equation for normal concrete using USPV cannot be used to estimate lightweight fine aggregate concrete strength. The signals in frequency domain of ultrasonic pulse of lightweight fine aggregate concrete does not show any significant difference comparing with those of normal concrete. The increases in stress levels of concrete change the pulse velocities and maximum frequencies, however the apparent relationship between themselves can not be found in this experiment.

• Journal of The Korean Association For Science Education
• /
• v.33 no.1
• /
• pp.63-78
• /
• 2013

Purposes of this study were to explore the process of experience that science teachers go through when participating in peer coaching meetings to improve teaching ability and to find out factors that affect each process of experience. The data were collected through recording of peer coaching meetings, videotapes of science class, and interviews. All the data were analyzed after transcription. The results of the study showed that even though Teacher K broke the ice and formed consensus among the peers by developing Content Representation (CoRe) at the beginning of the meetings, he became self-defensive rather than receptive of peers' opinions on the recorded class at the discussion session. But as the peer coaching went on, he realized that peer coaching was not about evaluation but rather on improving his teaching ability. In turn, he was able to look at his teaching in a more objective point of view and accepted suggestions from peer coaching discussion. The self-reflection of Teacher K acted as the key factor in the efforts to improve his teaching ability. He sought the concrete alternatives through the class analysis with fellow teachers and showed major changes in his teaching practice from the language habits, pronunciation, and speed of his speech to the interaction with students and class design. However, there was little change in knowledge of curriculum and assessment due to his strong orientation to improve students' grades as an academic high school teacher. Likewise, it was found that while peer coaching exert a strong influence on instructional methods and strategies of Teacher K, his strong orientation to improve students' grades hinders a balanced development of subcomponents of PCK.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.939-944
• /
• 2014

Traffic accidents caused by the attention dispersion are increasing and the behavior of the attention dispersion affects the front-observing rate, road keeping ability, and reaction time for a dangerous situation. Many drivers listen to a radio broadcast and they have to change the frequency for continuously listening a radio broadcast of the specific broadcasting station in case of crossing a boundary of the particular area. In this situation, the possibility of a car accident increases, because the attention dispersion of a driver might be occurred. Especially, the risk of a car accident caused by changing the frequency of a radio is more serious in the highway, due to the high speed of a vehicle. In order to reduce the risk of a car accident caused by handling a radio during driving car, in this paper, we propose an automatic frequency conversion algorithm for vehicle radio, which saves normal system frequencies of primary broadcasting stations in a database and determines new frequency of the changed area using the location information obtained from a navigation system in a boundary of the specific area. After determining new frequency, the proposed algorithm selects a frequency with better receiving rate comparing signal-to-noise ratios (SNRs) of two signals corresponding previous and new frequencies.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.303-310
• /
• 1996

The marine microalga Isochrysis galbana Parke was studied to optimize its growth conditions in flask culture. Important medium components studied include nitrogen source, buffer, trace elements and vitamins. Environmental conditions include pH, temperature, light intensity, mixing extent and working volume. The medium prepared from natural sea-waters gave a higher final cell density than the medium prepared from synthetic sea-water Nitrate was a better source than ammonium. In the range of 0.4∼2mM, the final cell density was proportional to the initial nitrate concentration and the cell yield was estimated to be 8.5g dry cell wt/g N. For phosphate, optimal growth was observed in 0.1∼1.0mM but a considerable variation in pH was resulted. The addition of Tris at 5mM or 7mM could stabilize the medium pH, but this significantly reduced both growth rate and final cell density, The effect of trace elements and vitamins was negligible. Optimal temperature and initial pH were $20^{\circ}C$ and 8. When the intensity of incident light was varied in the range of 400∼2100 lux, the growth rate increased from 10mL to 70mL, the final cell density decreased although the initial growth rate did not change. Optimal agitation speed was 100rpm when working volume was 30mL. With optimal conditions, the maximum specific growth rate obtained was 0.021hr-1 and the final cell density was 1.1g/L.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.67-77
• /
• 2012

O Having a highly reliable plan for the process and estimating an accurate construction period during the early stages of a construction project can prevent falsifying the plan and reduce the occurrence of construction delays. Moreover, it allows a succession of swift and accurate decisions to happen. The difficulty in obtaining an accurate estimate of the construction period is especially prominent in high-rise building projects because the works involved are very complicated and costly. As such, it is important that research is done to find out the impacts a reliable plan and good estimate of the construction period can bring with regards to the monthly work efficiency and success of a high-rise building project. However, due to the difference in climatic conditions at high altitude and surface level, the current way of calculating work efficiency in a typical project is inaccurate for a high-rise building project. With that, this paper aims to compute the work efficiency with height, taking into consideration the change in climatic elements at different working heights. A comparison of the results according to the climatic features of each city can also be done in this paper. According to the results calculated in work altitudes, the work efficiency in Busan falls the most. On the other hands, the work efficiency in Seoul falls the least. The reason these results are shown is the influence of wind speed at high altitude. The estimation of work efficiency at high altitude would be used for estimating construction period, feasibility studies, and selecting a city of high-rise building projects.

• Journal of Life Science
• /
• v.26 no.11
• /
• pp.1308-1312
• /
• 2016

Heavy metals such as gallium (Ga) cause serious physiological damage to exposed organisms, mostly of aquatic species. Ga one of the inter-metallic, transition elements increasingly being used in making high-speed semiconductors, such as Ga arsenide. The purposes of this study were to investigate the effects of Ga on acute toxicity, serum biochemical changes, and erythrocyte morphological changes in the blood stream of goldfish (Carassius auratus). Median lethal concentrations were determined in acute tests. The 96 hr $LC_{50}$ value was 9.15 mg/ml. Goldfish were exposed to different Ga concentrations (2.0, 4.0, and 8.0 mg/ml) for 30 days to assess its toxic effects. The results indicate that the measured serum biochemistry parameters (including glucose, blood urea nitrogen, creatinine, cholesterol, and triglyceride) of the Ga-exposed fish groups differed significantly from the untreated fish group. In addition, a change in the erythrocytes' morphology at a high concentration (8.0 mg/ml) of Ga exposure shows respiratory problems. Our results suggest that 2.0 mg/ml is proposed as a biologically safe concentration that can be used for establishing tentative water quality criteria concerning the same-size goldfish.

• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.349-361
• /
• 2013

This paper proposes a fast face tracking method with only depth information. It is basically a template matching method, but it uses a early termination scheme and a sparse search scheme to reduce the execution time to solve the problem of a template matching method, large execution time. Also a refinement process with the neighboring pixels is incorporated to alleviate the tracking error. The depth change of the face being tracked is compensated by predicting the depth of the face and resizing the template. Also the search area is adjusted on the basis of the resized template. With home-made test sequences, the parameters to be used in face tracking are determined empirically. Then the proposed algorithm and the extracted parameters are applied to the other home-made test sequences and a MPEG multi-view test sequence. The experimental results showed that the average tracking error and the execution time for the home-made sequences by Kinect ($640{\times}480$) were about 3% and 2.45ms, while the MPEG test sequence ($1024{\times}768$) showed about 1% of tracking error and 7.46ms of execution time.

• Journal of the Korean Society of Food Culture
• /
• v.26 no.4
• /
• pp.354-363
• /
• 2011

This study aimed to find the differences in weight control status and eating behavior of satisfied and dissatisfied female high school students regarding their own body shape. The participants consisted of 238 students at two female high schools in Nonsan-si, Chungnam-do in May of 2008. Self-assessment evaluated present body shape and ideal body shape they would like to have by providing silhouette drawings. The subjects were divided into two groups, 'satisfied' and 'dissatisfied', according to the differences between present body shape and ideal body shape. In the distribution of subjects according to body mass index, 100% of overweight, 97.0% of normal weight and 48.7% of underweight belonged to the dissatisfied group. There were significant differences in weight control and eating behavior between dissatisfied and satisfied groups in terms of frequency and reasons of conducting weight control behavior, body weight return after weight reduction, skipping breakfast and consuming fast food. The satisfied group was two times more likely to not conduct weight control behaviors compared to the dissatisfied group. The main reason for trying to control weight differed according to the group; the reason was feeling fat in the dissatisfied group and desiring to be healthy in the satisfied group. The percentage of subjects that returned to their original weights after weight reduction was 5 times higher in the dissatisfied group. The percentages of subjects that regularly skip breakfast and consume fast food were both higher in the dissatisfied group than in the satisfied group. The dissatisfied group responded 'eating alone' more frequently among nine binge eating behaviors compared to the satisfied group. Both groups, however, did not show any difference in overeating of meals, eating speed, intake frequency of regular meals, food preference, preferred cooking method, carbonated beverage intake and snack eating behavior. In summary, the dissatisfied group tried more unnecessary body weight reduction and had poor eating behavior. Accordingly, to correct the biased perception of body shape by the majority of female high school students, the values of our society should change toward the pursuit of beauty of health.