• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.23-29
• /
• 2015

In this paper, we introduce a underwater ranging algorithm with Look-up Table (LUT) by modifying the existing method which is using the changes of angles of accoustic rays with SSP (Sound Speed Profile). We compare the horizontal distance errors and the calculation times. Our new algorithm exploits Time of Arriva l(ToA) - horizontal distance table based on SSP. This algorithm offers faster calculation speed than the previous one with the slight increase of the distance estimation error.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.187-192
• /
• 2003

of the road would be a key index judged for a safety at the vehicle driving on the road. In Korea, as seen through a lot of documents, the vehicle driving speed is much faster compared with the design speed. The vehicle driving speed is an important element to get to know the vehicle driving characteristics. However, it is not easy to obtain the vehicle driving speed relating to vehicles' consecutive movements just merely through the presently used methods of vehicle driving speed. In consequence, this study has conducted photographing vehicle movements by use of digital moving images. Based on digital moving Images pictured, we have obtained a certain time interval frame and extracted out vehicles' coordinates and calculated vehicle speed from the firstly rectified image and the secondly rectified image. We could obtain comparatively exact results in the calculation of vehicle driving speed as errors of about 4%, as a result of comparison and verification of vehicle speed calculated from the digital moving images and the speed obtained from DGPS.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.132-135
• /
• 2008

This paper presents a PLL(Phase Lock Loop) control method for speed control of high speed miniature BLDCM(Brushless DC Motor) using hall sensor. The Proposed PLL based speed control method uses a only phase shift between reference pulse signal according to speed reference and actual pulse signal from hall sensor. It doesn't use any speed calculation, and calculates a direct current reference from phase shift. The current reference is changed to reduce the phase shift between reference and actual pulse. So the actual speed can keep the reference speed. The proposed control scheme is very simple but effective speed control is possible.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.2
• /
• pp.113-121
• /
• 1994

Since two oil shocks in 1970s, all of engine makers have persevered in their efforts to reduce specific fuel consumption and to increase engine power rate as much as possible in marine diesel engines. As a result, the maximum pressure in cylinders of these engines has been continuously increased. It causes direct axial vibration. The axial stiffness of crank shaft is low compared to old types of engine models by increasing the stroke/bore ratio and its major critical speed might occur within engine operation range. An axial damper, therefore, needs to be installed in order to reduce the axial vibration amplitude of the crankshaft. Usually the main critical speed of axial vibration for the propulsion shafting system with a 4-8 cylinder engine exists near the maximum continuous revolution(MCR). In this case, when the damping coefficient of the damper is increased within the allowance of the structural strength, its stiffness coefficient is also increased. Therefore, the main critical speed of axial vibration can be moved beyond the MCR. It has the same function as a conventional detuner. However, in the case of a 9-12 cylinder engine, the main critical speed of axial vibration for the propulsion shafting system exists below the MCR and thus the critical speed cannot be moved beyond the MCR by using an axial damper. In this case, the damping coefficient of an axial damper should be adjusted by considering the range of engine revolution, the location and vibration amplitude of the critical speed, the fore and aft vibration of the hull super structure. It needs to clarify the dynamic characteristics of the axial vibration damper to control the axial vibration appropriately. Therefore authors suggest the calculation method to analyse the dynamic characteristics of axial vibration damper. To confirm the calculation method proposed in this paper, it is applied to the propulsion shafting system of the actual ships and satisfactory results are obtained.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.149-161
• /
• 2022

Because the speed limit affects moving speed, it is closely related to traffic accidents as well as traffic flow. The existing speed limit calculation methods consider various engineering factors such as lanes, intersection spacing, driveways, crosswalks, 85 percentile speed, land uses, and roadway geometric characteristics etc. However, it can be said that the engineering analysis is insufficient because the traffic impact analysis considering traffic volume is not carried out. In addition, only 85 percentile speed, which is the spot speed, does not reflect the characteristics of the traffic flow on the road. In this paper, the effect of the speed limit change on the moving speed and the travel speed was analyzed in detail accordinr to the variation of intersection spacing and traffic volume. And by using the results, we proposed a speed limit calculation method that maintains the same service level as before the speed limit change, thereby increasing the speed improvement effect and reducing the difference between moving speed and travel speed. In addition, a variable speed limit operation method according to the change in traffic volume was also suggested. This method is expected to be effective in terms of safety by reducing the speed difference, which affects the severity of traffic accidents, while securing the speed improvement effect, and increasing the speed limit compliance rate of drivers by operating the speed limit that reflects the speed change due to the variation of traffic volume.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.289-292
• /
• 2001

This paper investigates a RBF equalizer (RBFE) reducing a center Estimating Speed. One of method for RBF center estimation is using k-means clustering. The performance of RBFE is depends on the estimation ability of the RBF center. We Propose a RBF Equalizer using modified k-means clustering algorithm (MKMC) to speed up channel estimation and to reduce complexity of calculation. Computer simulations are included to illustrate the analytical results. It is shown that a discussed method improves about 1 dB via less training data.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.249-256
• /
• 1998

Design target values of transmission loss in a high-speed train wall are suggested by calculating the difference between interior and exterior noise levels of it. Exterior noise level distribution on the boundary of train wall is calculated by Sysnoise, with sound source input prepared by experiments. Two kinds of exterior sound sources are considered, the rolling noise of train wheels on the rail and the aerodynamic noise from the pantograph. Interior noise level is provided by high-speed design target. Transmission loss characteristics according to the frequency band are examined.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.7
• /
• pp.1112-1120
• /
• 1994

This paper presents a servo control scheme for the surface-mounted permanent-magnet synchronous motor(SPMSM) which essentially uses vector control algorithm. The control system is composed of the PI controller for speed control and the current controller using space voltage vector PWM technique. The high-speed calculation and processing for vector control is carried out by TMS320C31 digital signal processor and IGBT module. The proposed scheme is verified through digital simulations and experiments for 2.2kW SPMSM and shows good dynamic performance.

• Tribology and Lubricants
• /
• v.17 no.4
• /
• pp.297-306
• /
• 2001

Under the condition of variable density and specific heat, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined within some degree of Journal misalignment. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the condition of variable density and specific heat play important roles in determining friction and load of Journal bearing at high speed operation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.311-317
• /
• 2013

In this paper, we proposed high speed LDPC decoding algorithm based on DVB-S2 standard for applying marine communications in order to multimedia transmission. For implementing the high speed LDPC decoder, HSS algorithm which reduce the iteration numbers without performance degradation is applied. In HSS algorithm, check node update units are update at the same time of bit node update. HSS can be accelerated to the decoding speed because it does not need to separate calculation of the bit nodes, However, check node calculation blocks need many clocks because of just one memory is used. Therefore, this paper proposed partial memory structure in order to reduced the delay and high speed decoder is possible. The results of the simulation, when the max number of iteration set to 30 times, decoding throughput of HSS algorithm is 326 Mbit/s and decoding speed of proposed algorithm is 2.29 Gbit/s. So, decoding speed of proposed algorithm more than 7 times could be obtained compared to the HSS algorithm.